Makita XFD01WSP Manual

Makita Boremaskine XFD01WSP

Læs gratis den danske manual til Makita XFD01WSP (28 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Makita XFD01WSP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

INSTRUCTION MANUAL

MANUEL D'INSTRUCTION

MANUAL DE INSTRUCCIONES

IMPORTANT: Read Before Using.

IMPORTANT: Lire avant usage.

IMPORTANTE: Leer antes de usar.

Cordless Driver Drill

Perceuse-Visseuse sans Fil

Atornillador Taladro Inalámbrico

XFD01

011360

ENGLISH (Original instructions)

SPECIFICATIONS

Model XFD01

Steel 13 mm (1/2")

Wood 38 mm (1-1/2")

Wood screw 10 mm x 89 mm (3/8" X 3-1/2")

Capacities

Machine screw M6 (1/4")

High (2) 0 - 1,500 /min

No load speed (RPM) Low (1) 0 - 400 /min

Overall length 192 mm (7-9/16")

Net weight 1.5 kg (3.3 lbs) 1.7 kg (3.8 lbs)

Rated voltage D.C. 18 V

Standard battery cartridge BL1815/BL1815N/BL1820 BL1830/BL1840/BL1850

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

GEA006-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal Safety

10. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

11. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

12. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your finger on the switch or energising power

tools that have the switch on invites accidents.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	XFD01WSP

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita XFD01WSP stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Boremaskine Makita Manualer

8 September 2025

27 August 2025

26 August 2025

11 August 2025

15 Juli 2025

Makita HR3011FC Manual

9 Juli 2025

Makita DP4021 Manual

8 Juli 2025

Makita HR008G Manual

8 Juli 2025

Makita HK1820L Manual

8 Juli 2025

Makita DP4020 Manual

8 Juli 2025

Boremaskine Manualer

Nyeste Boremaskine Manualer

Hazet 9530-11 Manual

30 September 2025

Bavaria BCD 18 2B Manual

29 September 2025

Bavaria BCD 18 Manual

29 September 2025

Bavaria BCD 14.4 2B Manual

29 September 2025

Bavaria BID 500 E Manual

29 September 2025

Bavaria BID 650 E Manual

29 September 2025

Bavaria BCD 144/2 Manual

29 September 2025

Graphite 58G858 Manual

29 September 2025

NEO Tools 04-723 Manual

28 September 2025

NEO Tools 04-616 Manual

28 September 2025