Cover
release
Receiver Out button
Receiver
Thank you for purchasing the MANHATTAN® MMX Wireless Optical Mobile Mini Mouse,
Model 176811. To view a datasheet with a full list of features and specications, go to
www.manhattan-products.com.
Installation
1. Press the battery compartment cover (just behind the Receiver
Out button) and slide the cover back to remove it.
2. Insert the two included AAA rechargeable batteries and replace
the cover.
3. Press the Receiver Out button and remove the receiver.
4. If the Low Power LED ashes, charge the mouse by connecting
it to the computer using the included retractable USB cable.
NOTE: The mouse can be used while it charges.
5. Plug the receiver into a USB port on the computer. The
operating system will detect the new device and
automatically install the driver(s).
6. Using a pin or similar object, press the ID button on the
receiver for a full second.
7. Within 10 seconds, press the ID button on the underside
of the mouse for a full second. The LED on the receiver will
ash rapidly for a few seconds and then remain lit, indicating
that the mouse and receiver are ready for use.
Operating Tips
• Operate the mouse on a white or light-colored surface
within 1.5 m (5 ft.) of the receiver for optimal performance.
• Remove the batteries if the mouse will not be used for an
extended period of time.
• The mouse automatically enters a sleep mode after a period of inactivity to save power.
Press any key or scroll to wake it.
• To disconnect power to the mouse, press and hold the ID button on the underside of the
mouse for 3 seconds. To restore power, press the ID button again.
• If the Low Battery LED ashes when the mouse is moved, change or re-charge the
batteries immediately.
• Remember to store the receiver in the mouse when it’s not being used.
Package Contents
• USB MMX Wireless Optical Mobile Mouse with Receiver
• (2) AAA rechargeable batteries and retractable cable reel
• User manual and carrying bag
ID
buttons
Receiver
LED
