Metra 99-3017B Manual


Læs gratis den danske manual til Metra 99-3017B (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Metra 99-3017B, eller vil du spørge andre brugere om produktet?

Side 1/4
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 11/17/2015 INST99-3017B
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Installation instructions for part 99-3017B
A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: • LC-GMRC-044 or AX-ADBOX2 and AX-ADGM04
Antenna Adapter: 40-EU55
Panel removal tool • Phillips screwdriver
• Socket wrench
;663:9,8<09,+
Chevrolet Trax 2015-up
99-3017B
A DCB
Dash Disassembly ................................................. 2
Kit Assembly
ISO DIN radio provision with pocket ...................... 3
Table of Contents
ISO DIN radio provision with pocket
Painted to match factory finish
20;-,(;<9,:
99-3017B
2
Dash Disassembly
1. Unclip and remove the panel
surrounding the factory radio
including the a/c vents. (Figure A)
2. Remove (4) 9/32” screws securing
the radio chassis. (Figure B)
3. Remove (2) screws securing the
a/c vents to the factory radio trim
panel and keep for kit assembly.
(Figure C)
4. Unclip and remove the (9) metal
panel clips from the factory panel
and keep them for kit assembly.
5. Unclip and remove the (2) small
pockets on either side of the a/c
vents and keep for kit assembly.
(Figure D)
Note: Remember the process
when removing these pockets
as you will need to reinstall
them into the 99-3017B radio
panel the same way.
Continue to kit assembly
(Figure A) (Figure C)
(Figure B) (Figure D)


Produkt Specifikationer

Mærke: Metra
Kategori: Ikke kategoriseret
Model: 99-3017B

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 99-3017B stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Metra Manualer

Metra

Metra 99-8216 Manual

3 Juni 2025
Metra

Metra 72-8110 Manual

18 Marts 2025
Metra

Metra BLK-9600 Manual

11 Marts 2025
Metra

Metra 99-7386B Manual

11 Marts 2025
Metra

Metra 82-8602 Manual

13 Januar 2025
Metra

Metra 99-8274 Manual

13 Januar 2025
Metra

Metra 95-7642 Manual

1 Januar 2025
Metra

Metra 95-7022HG Manual

1 Januar 2025
Metra

Metra 71-017C Manual

26 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer