Metra Axxess AX-ADGM04 Manual

Metra Ikke kategoriseret Axxess AX-ADGM04

Læs gratis den danske manual til Metra Axxess AX-ADGM04 (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Metra Axxess AX-ADGM04, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

AX-ADGM04

I N S TA L L A T I O N I N S T R U C T I O N S

INTRODUCTION

INTERFACE FEATURES

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun, solder,

and heat shrink • Small ﬂat-blade screwdriver

• Tape

• Wire cutter • Zip ties

TABLE OF CONTENTS

Connections to be made

For models

without

an ampliﬁer .......................3

For models

with

an analog ampliﬁer ................4

For models

with

a digital ampliﬁer ...................5

12-pin pre-wired ASWC-1 harness ......................6

DIN jack ................................................................6

Installing & programming the AX-ADGM04

AX-ADBOX1 ...........................................................6

AX-ADBOX2 .......................................................... 7

Adjusting the AX-ADGM04 ....................................8

Extra features .........................................................9

GM Data Interface 2012-2016

APPLICATIONS

See inside front cover

The AX-ADGM04 harness is designed for, and must be used with, the

AX-ADBOX1 or AX-ADBOX2 interface (sold separately). Please refer to the

AX-ADBOX1 or AX-ADBOX2 for the 16-pin connector with stripped leads

• Provides accessory power (12-volt 10-amp)

• Maintains the retained accessory power

(R.A.P.) feature

• Provides NAV outputs (parking brake,

reverse, speed sense)

• Retains chimes

• Retains OnStar / OE Bluetooth

• Adjustable OnStar level

• Retains RSE (rear seat entertainment)

• Retains satellite radio

• Retains the factory AUX-IN jack

• Pre-wired ASWC-1 harness

(ASWC-1 sold separately)

• Can be used in non-ampliﬁed, or analog/

digital ampliﬁed models

• Retains balance and fade†

• Micro-B USB updatable

INTERFACE COMPONENTS

• AX-ADGM04 harness

• 4-pin to 4-pin resistor pad harness

† To retain fade in digital ampliﬁed models, use the AX-ADBOX1

APPLICATIONS

CHEVROLET

Avalanche † * 2012-2013

Express † 2013-2015

Malibu

(with monochrome display) 2013-2015

Malibu Limited

(with monochrome display) 2016

CHEVROLET (CONT)

Silverado 2500 / 3500 † * 2014

Silverado † * 2012-2013

Suburban † ** 2012-2014

Tahoe † ** 2012-2014

Trax 2015-2016

GMC

Savana † 2013-2015

Sierra 2500 / 3500 † * 2014

Sierra † * 2012-2013

Yukon / Yukon XL † ** 2012-2014

These vehicles have a digital amp option. Please reference the “Service Parts Identiﬁcation” sticker located in the glove box for the RPO code Y91. If Y91 is present, then the vehicle is equipped with a digital ampliﬁer

These vehicles have a digital amp option. Please reference the “Service Parts Identiﬁcation” sticker located in the glove box for the RPO code Y91, STZ, or UQS. If Y91, STZ, or UQS is present, then the vehicle is equipped with a

digital ampliﬁer

† Only for models equipped with NAV. If not equipped with NAV, use the AX-ADGM01.