Midland LXT118VP Manual

Midland Radio LXT118VP

Læs gratis den danske manual til Midland LXT118VP (3 sider) i kategorien Radio. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Midland LXT118VP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Welcome to the world of Midland electronics

Congratulations on your purchase of a high quality MIDLAND product. Your

2-way radio represents state-of-the-art high-tech engineering. Designed for

FRS (Family Radio Service) operation, this compact package is big on

performance. It is a quality piece of electronic equipment, skillfully

constructed with the finest components. The circuitry is all solid-state and

mounted on a rugged printed circuit board. Your two-way radio is designed

for reliable and trouble-free performance for years to come.

LCD DISPLAY 1. TRANSMIT (TX) ICON – Indicates

radio is transmitting a signal.

2. VOLUME METER – Indicates the

volume setting of the radio.

3. RECEIVE (RX) ICON – Indicates

radio is receiving a transmission.

4. LOW BATTERY ICON – Indicates the

battery level is low.

5. VOX ICON – Indicates when VOX

mode is active.

6. CHANNEL NUMBER – Changes from

1~22 on FRS band.

CONTROLS

7. PTT Button – Press and hold to

transmit voice communication.

8. SCAN/LOCK Button – Press to enter

SCAN mode. Press and hold to turn

KEY LOCK on/off.

9. UP s

ss and DOWN t

tt Buttons – Make

adjustments in MENU mode.

10. SPEAKER – Built-in speaker.

11. ANTENNA

12. EXTERNAL SPEAKER/MIC/CHG

JACK

13. POWER / MODE Button – Press and

hold for at least 3 seconds to turn the

radio on/off. Press momentarily to

access Menu mode.

14. MIC – Built-in microphone.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device does not cause harmful interference, and (2) this

radio must accept any interference that may cause undesired operation.

To maintain compliance with FCC’s RF exposure guidelines, for body-worn operation,

this radio has been tested and meets the FCC RF exposure guidelines when used with

Midland Radio Corp. accessories supplied or designated for this product. Use of other

accessories may not ensure compliance with FCC RF exposure guidelines.

MIDLAND RADIO CORPORATION

MIDLAND RADIO CORPORATIONMIDLAND RADIO CORPORATION

5900 Parretta Drive

Kansas City, MO 64120

Call 816.241.8500

We’d love to hear from you! Let us know what you

think of your new Midland product on

or by visiting us at

midlandusa.com

Note: Features & Specifications are subject to change without

notice. MIDLAND is not responsible for unintentional errors or

omissions on its packaging.

BATTERY INSTALLATION

Your radio operates with 3 AAA alkaline batteries or NiMH rechargeable

batteries. The belt clip should be removed to ease installation or removal

of the batteries.

To install the batteries:

1. With the back of the radio facing you, remove the belt clip (see diagram

below) for easy access, then remove the Battery Cover by pressing

down on the top center and sliding it down from the radio.

2. Insert 3 AAA batteries observing the polarity as shown on the Battery

Compartment. Installing the batteries incorrectly will prevent the unit

from operating or may damage the unit.

3. Return the Battery Cover by sliding it up on the radio. Replace the belt

clip, making sure it locks into place.

BATTERY

COMPARTMENT

BATTERY

COMPARTMENT

COVER

Press here and

push down to open

BELT CLIP

LOCK T AB

BELT CLIP

LATCH

CHARGING THE BATTERY

Your radio is equipped for using rechargeable NiMH batteries which can be

recharged by inserting the AC adapter into the radio charge jack. Initial

charge time is 24 hours. Charge time is about 12 hours thereafter. For

maximum battery life, we recommend charging the batteries when the low

battery icon comes on. Remove the radios from the charger when the

charge time expires.

1. Only use our NiMH batteries.

2. Do not attempt to charge alkaline batteries or any batteries or

battery packs other than the one indicated in the manual. This

may cause leakage and damage to the radio.

3. For long term storage of the radio, turn the radio OFF and

remove the batteries from the radio.

EXTERNAL SPEAKER/MICROPHONE JACK

To use an optional speaker / microphone or headset:

lInsert the plug(s) into the SPK/MIC jacks.

lPlace the earbud into your ear, and adjust the mic to

your desired position.

SPK MIC

CHG

POWER ON/OFF AND VOLUME

Press the button for at least 3 seconds to turn the radioPOWER/MODE

on/off. To increase/decrease the volume level, press the s

ss t

tt\buttons

during or RX STANDBY mode. The VOLUME METER will indicate the

volume setting of the radio.

TRANSMITTING AND RECEIVING A CALL

1. For maximum clarity, hold the radio at least 1 inch (2.5 cm) from

your mouth.

2. Press and hold the button and speak in a normal voice into the PTT

microphone TX. The icon will appear continuously on the LCD display

while transmitting.

3. To receive a call, release the icon will appear on PTT button. The RX

the display when your radio is receiving a transmission.

SCAN

Your radio can scan all 22 channels for activity. To enter, quickly press the

SCAN button. Repeat the same procedure to exit. Your radio will rapidly

scan each of the 22 channels and stop on any active channel for 4 seconds

before resuming scan. When you press the button to transmit on anPTT

active channel, the scanning function will stop and remain on the active

channel. To resume scanning, quickly press the SCAN button.

CALL ALERT

Your radio can transmit a call alert. To send, press the button twicePTT

rapidly. The TX icon will appear while transmitting a call alert and a tone

can be heard on the speaker for confirmation.

KEYPAD LOCK

Press the button for 4 seconds. The “ ” icon will appear on theLOCK Lo

display. PTT will still be active. Repeat the same procedure to unlock the

keypad, a “ ” icon will appear on the display.LF

CHANNEL SELECTION (FRS BAND)

Press the button once, and then the buttons to select one ofMODE s

ss t

tt\

the 22 FRS channels. To confirm the selection, press the PTT button or

press the button again to move to the next feature setting.MODE

Note : To communicate between two radios, all radios in your group must be set

to the same channel.

VOX

To turn VOX on, press the button twice, the display shows “MODE VOX”

blinking while below the “ ” by pressing theoF” icon appears. Select “on

ss t

tt\buttons and push the key or the button again to confirm. PTT MODE

To turn VOX off, press the button twice, the display shows “MODE VOX”

blinking while below the “ ” by pressing theon” icon appears. Select “oF

ss t

tt\buttons and push the key or the button again to confirm.PTT MODE

OPERATING YOUR RADIO

Rev H

IMPORTANT NOTICE

Exposure To Radio Frequency Energy

Your Midland radio is designed to comply with the following national and

international standards and guidelines regarding exposure of human

beings to radio frequency electromagnetic energy:

- United States Federal Communications Commission, Code of Federal

Regulations: 47 CFR part 2 sub-part J

- American National Standards Institute (ANSI)/Institute of Electrical &

Electronic Engineers (IEEE) C95. 1-1992

- Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999

Edition

- National Council on Radiation Protection and Measurements (NCRP) of

the United States, Report 86, 1986

- International Commission on Non-lonizing Radiation Protection

(ICNIRP) 1998

To control your exposure and ensure compliance with the general

population or uncontrolled environment exposure limits, transmit no more

than 50% of the time. The radio generates measurable RF energy

exposure only when transmitting.

Body-Worn Operation

If you wear the radio on your body when transmitting always use Midland-

supplied or approved belt clip, holster, case, or body harness for this

product. Use of any accessories not supplied or approved by Midland may

exceed FCC/Health Canada RF exposure guidelines. If you do not use

any accessories supplied or approved by Midland, ensure the radio and

its antenna are at least 1 inch (2.5cm) from your body when

transmitting.

LOW BATTERY LEVEL INDICATOR

When the battery voltage gets low, the LOW BATTERY ICON

will blink along with the message “bt Lo” on the display. When using the

rechargeable battery pack, the low battery icon will indicate that you are

very close to the batteries being exhausted. When using AAA Alakaline

batteries, the low battery icon means you have about 50% of battery

life remaining

Produkt Specifikationer

Mærke:	Midland
Kategori:	Radio
Model:	LXT118VP
Vægt:	90.7 g
Dimensioner (BxDxH):	50 x 31.75 x 127 mm
Indikator for batteriniveau:	Ja
Batteritype:	AAA
Antal understøttede batterier:	3
Driftsfrekvens:	462.550 - 467.7125 Mhz
Antal kanaler:	22 kanaler
Maks. rækkevidde:	28968 m
Genopladelig:	Ja
Bælteclip:	Ja
Antal kanaler (i alt):	22 kanaler