Midland WR-11 Manual

Midland Radio WR-11

Læs gratis den danske manual til Midland WR-11 (4 sider) i kategorien Radio. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Midland WR-11, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

WR11 |All Hazards Weather Alert Radio

Owner’s Manual

Page 2 www.midlandradio.com

Model WR11 Owner’s Manual

Battery Installation:

Place 4 AA alkaline batteries (not supplied) into the compartment on the underside of radio.

(

Note: Batteries provide emergency power for the radio in case of a power outage.

)

AC Adapter:

Plug the AC Adapter into a standard outlet. Plug the other end of the adapter into the DC jack on the back of the radio.

Selecting a Weather Channel:

1. Ensure the “ON/RADIO/BUZZ/OFF” switch is in the ON position.

2. Move the “WEATHER/FM/AM” switch to WEATHER.

3. Use the “WX Channel” button to move through the 7 different weather channels. Stop on the channel with the strongest

broadcast signal.

4. To put the radio into weather standby mode, press the “WEATHER/SNOOZE” button while listening to the

weather broadcast.

Activating the Weather Alert:

1. Press the “ALERT MODE” button to choose between LED, LED SIREN, or VOICE alert types. The NOAA logo will begin blinking.

2. Once an alert type is selected, alert mode is automatically activated.

3. If an alert is received, press the “TEST/ALERT OFF” button to deactivate the alert.

(

Note: When radio is in weather standby, FM, AM, BUZZ or RADIO modes-and alert mode is activated, radio will automatically

override when alert information is received. If “ON/RADIO/BUZZ/OFF” switch is in OFF position, radio will not alert.)

Programming the Clock and Sleep Alarm:

1. Press and hold “TIME SET” button for 5 seconds

(HOUR option will begin ﬂashing

2. Press the “UP” button until current hour is displayed (

Note: AM/PM changes as you scroll through the hours

3. Press “TIME SET” button again

(MINUTE option will begin ﬂashing

4. Press “UP” button until current minutes are displayed.

5. Press “TIME SET” button again to save time setting and move to alarm setting

(HOUR option will begin ﬂashing

6. Program the alarm the same way as time set.

7. Press “TIME SET” button when finished to save settings and exit clock/sleep alarm programming.

(Note: When setting the clock or alarm clock, if you would like to scan quickly through the minutes press and hold the “UP” but-

ton. The minutes will advance in increments of 5.)

Activating the Sleep Alarm:

Wake to Radio:

1. After setting the desired alarm time, move the “ON/RADIO/BUZZ/OFF” switch to RADIO.

2. Move the “WEATHER/FM/AM” switch to desired radio you would like to wake to. The alarm icon will be

displayed on the LCD indicating the sleep alarm is activated.

Wake to Buzz:

1. After setting the desired alarm time, move the “ON/RADIO/BUZZ/OFF” switch to BUZZ. The alarm icon

will be displayed on the LCD indicating the sleep alarm is activated.

(Note: To temporarily silence sleep alarm, press WEATHER/SNOOZE button. This will advance the alarm time by 8 minutes. To

silence alarm for the remainder of the day, move the “ON/RADIO/BUZZ/OFF” switch to OFF position or to ON to listen to radio or

be in alert standby mode.To reset the alarm for next day move the "ON/RADIO/BUZZ/OFF to the "OFF" position then back

to desired wake position "RADIO" or "BUZZ".

Tuning the AM/FM Radio:

1. Ensure the “ON/RADIO/BUZZ/OFF” switch is in the ON position.

2. Move the “WEATHER/FM/AM” switch to desired position of either AM or FM.

3. Use the tuning wheel on the right side of the radio to tune to desired station.

4. Use the volume wheel on the left side of the unit to adjust the volume to desired listening level.

Weather/FM/AM Switch

ON/RADIO/BUZZ/OFF Switch

Volume Wheel

Time Set Button

Up Button

Test/Alert OFF Button

Alert Mode Button

Weather Channel Button

Weather/Snooze Button

Tuning Wheel

External Antenna Connector

External Alert Jack

DC Jack for AC Power

Produkt Specifikationer

Mærke:	Midland
Kategori:	Radio
Model:	WR-11
Bredde:	231.9 mm
Dybde:	95.25 mm
Højde:	69.85 mm
Vægt:	453.6 g
Brugervejledning:	Ja
Produktfarve:	Sort
Indbygget skærm:	Ja
Skærmtype:	LCD
Wi-Fi:	Ingen
Batteriteknologi:	Alkaline
Indbyggede højttaler(e):	Ja
Tuner type:	Digital
Udgangseffekt (RMS):	- W
Ethernet LAN:	Ingen
Driftstemperatur (T-T):	10 - 50 °C
Integreret ur:	Ja
DC-in-stik:	Ja
AC-adapter inkluderet:	Ja
Baggrundsfarve:	Orange
Antal indbyggede højttalere:	1
Antal understøttede batterier:	4
Understøttede radiobånd:	AM, FM
MP3-afspilning:	Ingen
Bæredygtighedscertifikater:	RoHS
Baggrundslys:	Ja
Lydalarm:	Ja
FM båndbredde:	87.9 - 108.1 Mhz
Kampatibilitet med Apple-docking:	Ikke understøttet
Radiotype:	Ur
Antal forudindstillede stationer:	7
Snooze funktion:	Ja
AM båndbredde:	530 - 1700 kHz
PLL-synthesizer:	Ingen
Kompatible batteristørrelser:	AA