Mikrotik CRS105-5S-FB Manual

Mikrotik Router CRS105-5S-FB

Læs gratis den danske manual til Mikrotik CRS105-5S-FB (2 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Mikrotik CRS105-5S-FB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

FiberBox series

The FiberBox is a network switch with five SFP ports. It is already configured, with all ports switched together. We

recommend you to set up a password to secure your device. This unit is compatible with 1.25G SFP modules.

Powering

The board accepts powering from the direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive

plug) accepts 9-30 V DC. The power consumption of this device under maximum load is up to 11 W.

Configuration

The FiberBox is set up as a switch, with 192.168.88.1 as the management IP of the bridge interface. RouterOS

includes many configuration options in addition to what is described in this document. We suggest to start here to

get yourself accustomed to the possibilities: . http://mt.lv/help

In case IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC http://mt.lv/winbox

address of the device.

For recovery purposes, it is possible to boot the device from network, see the next section.

Buttons and Jumpers

The reset button has three functions:

 Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS

configuration.

 Keep holding the button for 5 more seconds or until until the user LED turns off, then release it to make the

RouterBOARD look for Netinstall servers. The SFP1 port is used for the Netinstall process.

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed

before power is applied to the device. Useful for RouterBOOT debugging and recovery.

LED indicators

• Power LED is lit when the router is powered from the DC jack.

• The user LED can be configured from RouterOS.

• SFP LEDs indicate the SFP port activity.

Operating System Support

The device supports RouterOS software with the version number at or above what is indicated in the RouterOS

menu . Other operating systems have not been tested. /system resource

See mikrotik.com for more information. Contact for basic assistance. 23-Aug-17support@mikrotik.com

Produkt Specifikationer

Mærke:	Mikrotik
Kategori:	Router
Model:	CRS105-5S-FB
Bredde:	125 mm
Dybde:	48 mm
Højde:	178 mm
Vægt:	- g
Produktfarve:	Hvid
Generering af mobilnetværk:	Ingen
Ethernet LAN-porte (RJ-45):	5
Ethernet LAN:	Ja
Strømforbrug (typisk):	11 W
Driftstemperatur (T-T):	-20 - 70 °C
Operativsystem installeret:	RouterOS
DC-in-stik:	Ja
LED-indikatorer:	Ja
Lagermedie:	Flash
Indbygget processer:	Ja