Milwaukee 2734-20 Manual

Milwaukee Sav 2734-20

Læs gratis den danske manual til Milwaukee 2734-20 (36 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Milwaukee 2734-20, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/36
Cat. No. / No de cat.
2734-20
M18 FUEL™ 10" DUAL BEVEL COMPOUND SLIDING MITER SAW
SCIE À ONGLETS COMPOSÉS COULISSANTE À DOUBLE
BISEAU DE 254 mm (10") M18 FUEL™
SIERRA DE INGLETE COMPUESTA DESLIZANTE DE BISEL
DUAL DE 254 mm (10") M18 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o󰀨-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on the
switch or energizing power tools that have the switch
on invites accidents.
• Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair can
be caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action c
an cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn
it on and o󰀨. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Pow-
er tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may a󰀨ect
the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the po
wer tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations di󰀨erent
from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, ush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or
modied. Damaged or modied batteries may exhibit
unpredictable behavior resulting in re, explosion or
risk of injury.

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Sav
Model: 2734-20

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 2734-20 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sav Milwaukee Manualer

Milwaukee

Milwaukee MXF COSCG2 Manual

5 September 2024
Milwaukee

Milwaukee SCS 65 Q Manual

26 Maj 2024
Milwaukee

Milwaukee M18 Fuel 2737-21 Manual

23 Marts 2024
Milwaukee

Milwaukee 2530-20 Manual

4 Marts 2024
Milwaukee

Milwaukee M18 Fuel 2720-21 Manual

28 Februar 2024
Milwaukee

Milwaukee M18 Fuel 2729S-22 Manual

26 Februar 2024
Milwaukee

Milwaukee M18 Fuel 2830-21 Manual

6 Februar 2024
Milwaukee

Milwaukee M18 Fuel 2990-20 Manual

1 Februar 2024
Milwaukee

Milwaukee M18 2621-22 Manual

29 Januar 2024
Milwaukee

Milwaukee 2723-20 Manual

17 Januar 2024

Sav Manualer

Nyeste Sav Manualer

Hyundai

Hyundai HY20CCS10 Manual

19 Juni 2025
Hyundai

Hyundai HY20CPS Manual

19 Juni 2025
MSW

MSW -CBS-250 Manual

17 Juni 2025
Smart365

Smart365 SM-04-02060 Manual

17 Juni 2025
Dremel

Dremel CS12V Manual

13 Juni 2025
Metabo

Metabo BAS 505 Precision WNB Manual

9 Juni 2025
Mega

Mega 64000 Manual

9 Juni 2025
Metabo

Metabo ST 18 LT 130 Manual

8 Juni 2025
Metabo

Metabo STB 18 LT 130 Manual

8 Juni 2025
Metabo

Metabo BAS 505 Precision DNB Manual

7 Juni 2025