Milwaukee 48-08-0561 Manual

Milwaukee savemaskine 48-08-0561

Læs gratis den danske manual til Milwaukee 48-08-0561 (8 sider) i kategorien savemaskine. Denne vejledning er vurderet som hjælpsom af 54 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 27.5 anmeldelser. Har du et spørgsmål om Milwaukee 48-08-0561, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Cat. No. / No de cat.

48-08-0561

FOLDING TABLE SAW STAND

SUPPORT DE SCIE À TABLE PLIANT

BASE PLEGABLE PARA SIERRA FIJA

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

SPECIFIC SAFETY RULES

TABLE SAW STAND

WARNING

Read all safety warnings and all

instructions provided with the ta-

ble saw stand and the table saw to be mounted.

Failure to follow the warnings and instructions may

result in electric shock, re and/or serious injury.

Save all warnings and instructions for future

reference.

• Disconnect the battery pack from the table saw

before making any adjustments or changing

accessories. Accidental starting of the power tool

is a cause of some accidents.

• Properly assemble the table saw stand before

mounting the tool. Proper assembly is important

to prevent risk of collapse.

• Securely fasten the table saw to the table saw

stand before use. Table saw shifting on the table

saw stand can cause loss of control.

• Place the table saw stand on a solid, at and level

surface. If the table saw stand can shift or rock, the

table saw or workpiece cannot be safely controlled.

• Do not overload the table saw stand or use as

ladder or sca󰀨olding. Overloading or standing on

the table saw stand causes the stand to be “top-

heavy” and likely to tip over.

• Use only with MILWAUKEE Table Saws 2736-20,

and mount securely, according to these instruc-

tions. Improperly installed Table Saws can cause

injury or property damage.

• Avoid dangerous environments. Use your tool stand

on at, level, dry, and hard surfaces only.

• Keep work area clean and well lit. Cluttered, dark

work areas invite accidents.

• The table saw stand weight limit is lb (82 180 kg).

If more than 180 lbs is placed on the table saw stand it

may be damaged and may cause personal injury.

• Maintain control. Keep proper footing and balance at

all times.

• Maintain table saw stand carefully. Keep table saw

stand dry, clean and free from oil and grease. Follow

instructions for changing accessories. Periodically

inspect table saw stand for damage and wear.

• Maintain labels. These carry important information. If

unreadable or missing, contact a MILWAUKEE service

facility for a free replacement.

• Keep bystanders away. Children and bystanders

should be kept at a safe distance from the work area

to avoid distracting the operator.

• To reduce the risk of injury, always wear eye pro-

tection.

• Fingers can be pinched between the legs of the

table saw stand. To reduce the risk of injury, keep

your ngers out of the areas where the legs will

fold.

• Always use common sense and be cautious

when using tools. It is not possible to anticipate

every situation that could result in a dangerous out-

come. Do not use this tool if you do not understand

these operating instructions or you feel the work is

beyond your capability; contact Milwaukee Tool or

a trained professional for additional information or

training.

ASSEMBLY

WARNING

Properly assemble the table saw

stand before mounting the tool.

Proper assembly is important to ensure stability.

Legs must match with corresponding number

indicators on the stand.

Assembling the Stand

Indicators

Short

Bolt & Nut

Long Bolt,

Spacer, & Nut

Adjustable

Foot & Nut

1. Remove all packaging and zip ties.

2. Insert the legs into the frame according to the in-

dicator stickers. Mismatched leg/frame assembly

will cause the frame to wobble.

3. Insert a small bolt through the frame/legs assembly

and thread on the nut. Use a 6 mm hex wrench

and an adjustable (or 17 mm open end) wrench

to securely tighten.

4. Insert the legs of narrower frame through the

opening between the cross bar and top of the

wider frame. To complete this step and align the

bolt holes, you will need to tip the narrow frame

side to side to pass the cross bar through the

opening of the wider frame. For assembly as-

sistance, go to the product information page at

www.milwaukeetool.com.

5. Lay the assembly on its side and align the bolt

holes, placing the plastic spacer between the

frame sections, as shown.

6. Insert the long bolt through the wider frame,

spacer, and narrower frame and secure with the

nut. Use a 6 mm hex wrench and an adjustable

(or 17 mm open end) wrench to securely tighten.

7. Screw the nut onto the adjustable foot (the nut

may come factory assembled)

8. Screw in the adjustable foot into the stand until the

stand sits level. Turn the nut back until it contacts

the frame, locking the adjustable foot in place.

Crossbar

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	savemaskine
Model:	48-08-0561

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 48-08-0561 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

savemaskine Milwaukee Manualer

Milwaukee M12 JS-402B Manual

3 Oktober 2024

Milwaukee HD18 JSB-402C Manual

16 September 2024

Milwaukee M18 Fuel 2720-22 Manual

14 September 2024

Milwaukee TILT-LOK 6390-21 Manual

13 September 2024

Milwaukee M18 FTCHS14 Manual

11 September 2024

Milwaukee 49-90-2829 Manual

4 September 2024

Milwaukee MSUV280 Manual

3 September 2024

Milwaukee M18 BJS Manual

2 September 2024

Milwaukee M12 BS Manual

2 September 2024

Milwaukee M18 FMCS66 Manual

2 September 2024

savemaskine Manualer

Nyeste savemaskine Manualer

Einhell GE-CS 18 Li Manual

15 Oktober 2024

15 Oktober 2024

15 Oktober 2024

14 Oktober 2024

13 Oktober 2024

Einhell TC-AP 650 E Manual

12 Oktober 2024

Einhell TE-SM 36/210 Li Solo Manual

11 Oktober 2024

Einhell BT-SM 2534 Manual

11 Oktober 2024

Hitachi C 7MFA(LA) Manual

9 Oktober 2024

Ozito ECS-406A Manual

6 Oktober 2024