Milwaukee 6141-31 Manual

Milwaukee Rysteplaster 6141-31

Læs gratis den danske manual til Milwaukee 6141-31 (21 sider) i kategorien Rysteplaster. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Milwaukee 6141-31, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/21

TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL.

AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE

MANUEL DE L'UTILISATEUR.

PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL

DEL OPERADOR.

Cat. No.

No de cat.

6140

6141

6145

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

HEAVY-DUTY SANDERS/GRINDERS

EXTRA ROBUSTE PONCEUSE-RECTIFIEUSE

LIJADORAS/ESMERILADORAS HEAVY-DUTY

2 3

WORK AREA SAFETY

ELECTRICAL SAFETY

PERSONAL SAFETY

WARNING

READ ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in electric shock, ﬁ re and/or

serious injury. The term "power tool" in all of the warnings listed below refers to your

mains-operated (corded) power tool or battery-operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

GENERAL SAFETY RULES — FOR ALL POWER TOOLS

1. Keep work area clean and well lit.

Cluttered or dark areas invite acci-

dents.

2. Do not operate power tools in ex-

plosive atmospheres, such as in the

presence of ﬂ ammable liquids, gases,

or dust. Power tools create sparks which

may ignite the dust or fumes.

3. Keep children and bystanders away

while operating a power tool. Distrac-

tions can cause you to lose control.

4. Power tool plugs must match the

outlet. Never modify the plug in any

way. Do not use any adapter plugs

with earthed (grounded) power tools.

Unmodiﬁ ed plugs and matching outlets

will reduce risk of electric shock.

5. Avoid body contact with earthed or

grounded surfaces such as pipes,

radiators, ranges and refrigerators.

There is an increased risk of electric shock

if your body is earthed or grounded.

6. Do not expose power tools to rain or

wet conditions. Water entering a power

tool will increase the risk of electric

shock.

7. Do not abuse the cord. Never use the

cord for carrying, pulling, or unplug-

ging the power tool. Keep cord away

from heat, oil, sharp edges, or mov-

ing parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool out-

doors, use an extension cord suitable

for outdoor use. Use of a cord suitable

for outdoor use reduces the risk of elec-

tric shock.

9. Stay alert, watch what you are do-

ing and use common sense when

operating a power tool. Do not use

a power tool while you are tired or

under the inﬂ uence of drugs, alcohol

or medication. A moment of inattention

while operating power tools may result

in serious personal injury.

10. Use safety equipment. Always wear

eye protection. Safety equipment such

as dust mask, non-skid safety shoes,

hard hat, or hearing protection used

for appropriate conditions will reduce

personal injuries.

11. Avoid accidental starting. Ensure the

switch is in the off-position before plug-

ging in. Carrying tools with your ﬁ nger on

the switch or plugging in power tools that

have the switch on invites accidents.

12. Remove any adjusting key or wrench

before turning the power tool on. A

wrench or a key left attached to a rotat-

ing part of the power tool may result in

personal injury.

13. Do not overreach. Keep proper foot-

ing and balance at all times. This

enables better control of the power tool

in unexpected situations.

14. Dress properly. Do not wear loose

clothing or jewellery. Keep your hair,

clothing and gloves away from moving

parts. Loose clothes, jewellery, or long

hair can be caught in moving parts.

15. If devices are provided for the connec-

tion of dust extraction and collection

facilities, ensure these are connected

and properly used. Use of these de-

vices can reduce dust-related hazards.

POWER TOOL USE AND CARE

16. Do not force the power tool. Use the

correct power tool for your applica-

tion. The correct power tool will do the

job better and safer at the rate for which

it was designed.

17. Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

18. Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories,

or storing power tools. Such preven-

tive safety measures reduce the risk of

starting the tool accidentally.

19. Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tools or

these instructions to operate power

tools. Power tools are dangerous in the

hands of untrained users.

20. Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power tool's operation. If damaged,

have the power tool repaired before

use. Many accidents are caused by

poorly maintained power tools.

21. Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to

bind and are easier to control.

22. Use the power tool, accessories and

tool bits etc., in accordance with

these instructions and in the manner

intended for the particular type of

power tool, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

SERVICE

23. Have your power tool serviced by a

qualiﬁ ed repair person using only

identical replacement parts. This will

ensure that the safety of the power tool

is maintained.

SPECIFIC SAFETY RULES

1. Always use proper guard with grind-

ing wheel. A guard protects operator

from broken wheel fragments.

2. Accessories must be rated for at least

the speed recommended on the tool

warning label. Wheels and other acces-

sories running over rated speed can ﬂ y

apart and cause injury.

3. Make sure all wheel ﬂ anges and other

mounting hardware are in good con-

dition and are always used properly.

Defective or missing parts may dam-

age the wheels and other accessories.

Always use mounting hardware supplied

with the tool.

4. Hold tools by insulated gripping sur-

faces when performing an operation

where the cutting tool may contact

hidden wiring or its own cord. Con-

tact with a “live” wire will make exposed

metal parts of the tool “live” and shock

the operator.

5. Keep hands away from all cutting

edges and moving parts.

6. Maintain labels and nameplates.

These carry important information.

If unreadable or missing, contact a

MILWAUKEE service facility for a free

replacement.

7. WARNING: Some dust created by

power sanding, sawing, grinding, drill-

ing, and other construction activities

contains chemicals known to cause

cancer, birth defects or other reproduc-

tive harm. Some examples of these

chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement

and other masonry products, and

• arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies,

depending on how often you do this

type of work. To reduce your exposure

to these chemicals: work in a well ven-

tilated area, and work with approved

safety equipment, such as those dust

masks that are specially designed to

ﬁ lter out microscopic particles.

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Rysteplaster
Model:	6141-31

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 6141-31 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Rysteplaster Milwaukee Manualer

Milwaukee 6140-30 Manual

15 Juli 2025

Milwaukee M18 Fuel 2832-20 Manual

15 Juli 2025

Milwaukee 6065-6 Manual

15 Juli 2025

Milwaukee 6117-31 Manual

15 Juli 2025

Milwaukee 6147-30 Manual

15 Juli 2025

Milwaukee 6141-31 Manual

15 Juli 2025

Milwaukee 6117-33 Manual

15 Juli 2025

Milwaukee 6142-30 Manual

15 Juli 2025

Milwaukee 6088-30 Manual

15 Juli 2025

Milwaukee M12 Fuel FDSS Manual

5 Juli 2025

Rysteplaster Manualer

Nyeste Rysteplaster Manualer

Bosch GWX 13-125 Professional Manual

16 Juli 2025

DeWalt DWE750 Manual

14 Juli 2025

RYOBI One+ RROS18C Manual

14 Juli 2025

Mac Tools AS230V Manual

9 Juli 2025

Mac Tools AS408 Manual

9 Juli 2025

Dedra DED7766 Manual

9 Juli 2025

Graphite 59G329 Manual

9 Juli 2025

Dedra DED7765 Manual

9 Juli 2025

Makita BO007CG Manual

8 Juli 2025

Graphite 58GE141 Manual

8 Juli 2025