Milwaukee MX Fuel RAPIDSTOP MXF315 Manual

Milwaukee Sav MX Fuel RAPIDSTOP MXF315

Læs gratis den danske manual til Milwaukee MX Fuel RAPIDSTOP MXF315 (28 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Milwaukee MX Fuel RAPIDSTOP MXF315, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/28
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
Cat. No. / No de cat.
MXF315
MX FUEL™ 14" CUT-OFF MACHINE
TRONÇONNEUSE DE 355 mm (14") MX FUEL™
HERRAMIENTA DE CORTE DE 355 mm (14") MX FUEL™
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o󰀨-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on
the switch or energizing power tools that have the
switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was designed.
• Do not use the power tool if the switch does not
turn it on and o󰀨. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may a󰀨ect the power tool’s operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations di󰀨erent from those intended could
result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Sav
Model: MX Fuel RAPIDSTOP MXF315

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee MX Fuel RAPIDSTOP MXF315 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sav Milwaukee Manualer

Milwaukee

Milwaukee M18 FRBCO32 Manual

17 September 2025
Milwaukee

Milwaukee M18 Fuel FCSRH662 Manual

16 September 2025
Milwaukee

Milwaukee M18 FUEL 2826-20 Manual

6 September 2025
Milwaukee

Milwaukee M18 Fuel 2929S-20 Manual

26 August 2025
Milwaukee

Milwaukee M18 Fuel Hachet 3004-20 Manual

26 August 2025
Milwaukee

Milwaukee M18 Fuel SUPER SAWZALL 2722-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 Fuel 2529-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 Fuel Hatchet 2527-20 Manual

13 August 2025
Milwaukee

Milwaukee M28 0730-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2731-20 Manual

13 August 2025

Sav Manualer

Nyeste Sav Manualer

MacAllister

MacAllister MCS2400 Manual

3 Oktober 2025
MacAllister

MacAllister MCS2000 Manual

3 Oktober 2025
Gardol

Gardol GEK-E 2240 L Manual

3 Oktober 2025
Gardol

Gardol GEK-E 2240 Manual

3 Oktober 2025
Gardol

Gardol GATS-E 20 Li Manual

3 Oktober 2025
Gardol

Gardol GMSE 2045 Manual

3 Oktober 2025
Gardol

Gardol GETS-E 710 Manual

2 Oktober 2025
Gardol

Gardol GMS-E-45EV Manual

2 Oktober 2025
Gardol

Gardol GAA-E 20 Li OA Manual

2 Oktober 2025
Gardol

Gardol GMSE 1535 Manual

2 Oktober 2025