MuxLab 500088 Manual

MuxLab Ikke kategoriseret 500088

Læs gratis den danske manual til MuxLab 500088 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 101 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 51 anmeldelser. Har du et spørgsmål om MuxLab 500088, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Specifications
Environment
Digital Audio, Dolby Digital, DTS or LPCM
Devices
DVD, CD Players, TV, PC, laptops.
Transmission
Transparent to the user
Signals
Dolby Digital, DTS & 2 channel LPCM
Connectors
One (1) Coaxial connector
One (1) TOSLink Connector.
Two (2) RCA Connectors.
Note: Audio cables not included.
Switch
Selects between SPDIF and TOSlink
Distortion
<0.001% @ 1KHz
SNR
> 90 dB (20Hz – 20 KHz)
Sample Rate
32, 44.1, 48 and 96 KHz
Bit Depth
24 bit S/PDIF compress & uncompress bitstream
Power Supply
One (1) 110-240V/5VDC power supplies with interchangeable
blades
Power Consumption
2.05 Watt
Temperature
Operating: 0° to 40°C 20° to 85°C -Storage:
Humidity: Up to 95% non-condensing
Enclosure
ABS fire retardant plastic
Dimensions
2.4” x 2.25” x 1.0” (6.1 x 5.5 x 2.5 cm)
Weight
1.0 lb (0.45 kg)
Compliance
Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty
2 years
Order Information
500088 Digital Audio Converter, Dolby & DTS
Trademark acknowledgments
All products or services names mentioned in this document may be trademarks of
the companies with which they are associated.
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS
licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered
trademarks, and DTS 2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc. All
Rights Reserved.
Digital Audio Converter, Dolby & DTS
500088
Quick Installation Guide
Overview
The Digital Audio Converter, Dolby (50008& DTS 8) converts one LPCM-encoded,
one DTS or one Dolby Digital coaxial (S/PDIF) or optical (TOSLink) digital audio
signal to a standard left/right analog audio output, thereby allowing a digital audio
source such as a DVD or CD player without RCA analog audio output to be connected
to an audio- video receiver or TV.
Applications
Applications include commercial and residential audio systems, boardroom systems,
collaborative PC systems, and medical information systems.
Installation
1. Identify the connectors on the Digital Audio Converter as indicated on the product
panels.
© MuxLab Inc. 2014 94 000775- -A SE-000775-A
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905 0588 Fax: (514) 905- -0589
Toll Free (North America): (877) 689-5228
E- mail: videoease@muxlab.com URL: www.muxlab.com
2. To install the Digital Audio Converter:
2a. Connect the converter input to the digital audio source with an Optical (TOSLink)
or 75 ohm coaxial (S/PDIF) cable.-
2b. Set the input switch to the appropriate signal.
2c. Connect the converter output to the analog audio receiver with a stereo audio
compliant cable.
3. Connect the 5 VDC power supply to the converter first, and then plug the power
supply into an AC power outlet. If power is present, the green power LED of the
Digital Audio Converter will be ON.
Note: Power -on the Digital Audio Converter only after all connections are made.
4. Power-on the audio source and receiver and verify the audio quality.
5. The following diagrams shows the final configuration.
Troubleshooting
The following table describes some of the symptoms, probable causes and possible solutions
in regard to the installation of the Digital Audio Converter:
Symptom
LEDs
Probable
Cause
Possible
Solutions
Power
Lock
No Sound
OFF
OFF
No power
No Sound
ON
OFF
Optical/Coaxial Cable
No Sound
ON
ON
Stereo audio cable
No Sound
ON
ON
Wrong input on receiver
receiver can receive analog stereo
No Sound
ON
ON
The Audio source is set to
7.1 channels of audio,
which is not supported
through the Toslink or
Coax connection
LPCM or 5.1 Bitstream digital
audio which is supporting Dolby
digital and DTS
Choppy
sound
ON
ON
Weak Connections
• Check the Optical/Coaxial Cable
If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at
877 689- -5228 (toll-free in North America) or (+1) 514- -905 0588 (International).
© MuxLab Inc. 2014

Produkt Specifikationer

Mærke: MuxLab
Kategori: Ikke kategoriseret
Model: 500088

Har du brug for hjælp?

Hvis du har brug for hjælp til MuxLab 500088 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret MuxLab Manualer

MuxLab

MuxLab 500514 Manual

11 Juli 2025
MuxLab

MuxLab 500998 Manual

12 Marts 2025
MuxLab

MuxLab 500467 Manual

12 Marts 2025
MuxLab

MuxLab Shielded CATV Balun 500306 Manual

12 Marts 2025
MuxLab

MuxLab Video Capture and Recorder 100512 Manual

12 Marts 2025
MuxLab

MuxLab 500999 Manual

12 Marts 2025
MuxLab

MuxLab CCTV Power-Thru Balun 500024 Manual

12 Marts 2025
MuxLab

MuxLab 500445 Manual

21 Februar 2025
MuxLab

MuxLab 500772 Manual

20 Februar 2025
MuxLab

MuxLab 100510 Manual

20 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Structural Concepts

Structural Concepts Reveal NE3620HSSV Manual

2 Oktober 2025
Advantech

Advantech FWA-4030 Manual

2 Oktober 2025
Vestil

Vestil ULTT-5448-6-YEL230-1 Manual

2 Oktober 2025
TC Electronic

TC Electronic Duplicator Manual

2 Oktober 2025
Axxess

Axxess AXTC-HN1 Manual

2 Oktober 2025
Structural Concepts

Structural Concepts Reveal NE3635RSSV Manual

2 Oktober 2025
Structural Concepts

Structural Concepts Fusion GP541RRLB Manual

2 Oktober 2025
Dillinger Labs

Dillinger Labs StreetHeart SKAA Pro Manual

2 Oktober 2025
Draper

Draper 02931 Manual

2 Oktober 2025
Mirage

Mirage 74110240 Manual

2 Oktober 2025