Netgear WN370 Manual

Netgear Adgangspunkt WN370

Læs gratis den danske manual til Netgear WN370 (2 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Netgear WN370, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Installation

Wall Mount Access Point

Model WN370

Package Contents

• Wall Mount Access Point

• Mounting bracket with four mounting screws

• Installation guide

Installation Requirements

The following items are required:

• 6 mm Phillips screwdriver

• T8 screwdriver

• Windows-based computer (Windows 7 or newer operating system)

• Standard EU or US wall outlet junction box with an Ethernet cable routed

through the wall from your LAN to the junction box

• IEEE 802.3af/at–compliant PoE switch or IEEE 802.3af/at–compliant PoE

injector

6. Connect the Ethernet cable providing PoE and network connectivity to the

PoE port on the back of the access point.

7. (Optional) Connect the Ethernet cable providing pass-through support to the

pass-through port on the back of the access point.

8. Mount the access point to the mounting bracket using the included T8

screws.

Network Environment

The WN370 access point can be deployed in a network managed by the following

NETGEAR wireless controller models:

• WC7500

• WC7600v2

• WC7600

• WC9500

If your network includes a DHCP server, option 43 must be enabled pointing

toward the IP address of the wireless controller.

Make sure that you are running the latest ﬁrmware version on your device.

To ﬁnd documentation, ﬁrmware, soware, or other ﬁles, visit

downloadcenter.netgear.com.

Install the Access Point

The access point requires an electrical outlet junction box mounted in a wall.

¾To install the access point:

1. Remove the faceplate from the outlet junction box.

2. Run the Ethernet cable through the junction box with enough slack to reach

the access point.

3. Run the Ethernet cables through the

mounting bracket.

4. Align the mounting bracket with the holes

on the junction box.

5. Attach the mounting bracket to the

junction box using the included Phillips

head screws.

Support

Thank you for purchasing this NETGEAR product. You can visit

www.netgear.com/support to register your product, get help, access the latest

downloads and user manuals, and join our community. We recommend that you

use only ocial NETGEAR support resources.

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en

français canadien à http://downloadcenter.netgear.com/other/.

(If this product is sold in Canada, you can access this document in Canadian

French at http://downloadcenter.netgear.com/other/.)

For the current EU Declaration of Conformity, visit

http://kb.netgear.com/11621.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

December 2017

are trademarks of NETGEAR, Inc. Any non-NETGEAR

trademarks are used for reference purposes only.

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR INTL LTD

Building 3, University Technology Centre

Curraheen Road, Cork, Ireland

Discover the Access Point

To discover and conﬁgure the access point using a wireless controller:

1. Open a web browser, and in the browser’s address ﬁeld, type the wireless

controller’s IP address.

2. Log in to the wireless controller.

The wireless controller’s local browser–based management interface page

displays.

3. Select Access Point > Discovery Wizard.

4. Follow the onscreen steps to discover the access point and review the

discovery results.

5. Add the access points that you want to be managed by the wireless controller

to the Managed AP List.

6. Make sure that the country is set to the location where the device is

operating.

You must comply with the local, regional, and national regulations set for

channels, power levels, and frequency ranges.

For more information about the Discovery Wizard and the managed AP list, see

the wireless controller user manual. To view or download the user manual, visit

downloads.netgear.com/ﬁles/GDC/WC7500/WC_AllModels_UM.pdf.

Verify Connectivity

From a computer or mobile device, verify that you can connect to the WiFi

network of the access point. You can also check the access point LEDs to verify a

successful installation and connection.

LED Description

Power • Solid amber. The access point is booting.

• Slow blinking amber. The access point is not managed by a

wireless controller.

• Green. The access point booted and is managed by a wireless

controller.

Activity . Network trac through the access point.• Blinking green

• O. No network trac through the access point is detected.

WiFi On/O . The access point’s WiFi is active.• Solid green

• O. The access point’s WiFi is o.

Produkt Specifikationer

Mærke:	Netgear
Kategori:	Adgangspunkt
Model:	WN370
Bredde:	135.2 mm
Dybde:	93.1 mm
Højde:	25.9 mm
Vægt:	218 g
Produktfarve:	Hvid
Opbevaringstemperatur (T-T):	-20 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 95 %
Ethernet LAN-porte (RJ-45):	7
Strømforbrug (typisk):	5.1 W
Driftstemperatur (T-T):	0 - 45 °C
Ethernet LAN-datahastigheder:	10,100 Mbit/s
Sikkerhedsalgoritmer:	WEP,WPA,WPA2
Netværksstandarder:	IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.1x
Webbaseret administration:	Ja
Servicekvalitet support (QoS):	Ja
LED-indikatorer:	Ja
Harmoniseret systemkode (HS):	85176990
Antal brugere:	- bruger(e)
Frekvensbånd:	2.4 GHz
Intern:	Ingen
Maksimal dataoverførselshastighed:	300 Mbit/s
Wi-Fi-datahastighed (maks.):	300 Mbit/s
Firmware kan opgraderes:	Ja
Strøm over Ethernet (PoE):	Ja
Antal kanaler:	- kanaler
VLAN understøttelse:	Ja
Filtrering af MAC-adresser:	Ja
Administrationsprotokoller:	SNMP
2.4 GHz:	Ja
WAN-forbindelse:	Ethernet (RJ-45)
Antennefunktioner:	Integreret antenne
Niveau for antennestyrke (maks.):	3 dBi