Inserng the baery
Your device is provided with a lithium-ion baery and is
designed to be used exclusively with original NGM baeries and
chargers. The baery must be inserted into the backside of the
phone (see illustraon below) with the baery contacts facing
the contacts in the baery tray. When done, the hind cover put
back into posion as shown in the following illustraons.
Charging the battery
Please charge the baery completely before starng to use the
device. Use the provided USB cable, connecng one end to the
provided wall socket adaptor (placed into a socket) and the other
end to the USB connector placed on the le side of the phone. The
phone can also be charged by connecng it to a PC USB port but in
that case it will charge more slowly .
While the baery is charging, an animaon on screen will show the
charging progress if the phone is on. Once charge is completed, the
icon will be lled and the phone can be disconnected from the grid.
Warning: Do not connect the phone to a boong- or running down up
PC to avoid voltage jumps. In order to preserve the correct
funconing of the device and in order not to compromise warranty,
the sole use of original NGM baery chargers and accessories are
recommended. Please charge the baery indoors, in a dry and
favorable environment. It’s normal for the baery to get slightly
warm during the charging process. The baery will reach the full
capacity when cycled several mes.