Novation Dicer Manual


Læs gratis den danske manual til Novation Dicer (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 75 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 38 anmeldelser. Har du et spørgsmål om Novation Dicer, eller vil du spørge andre brugere om produktet?

Side 1/10
Programmers Reference
Dicer Programmer’s Reference 2
1 Introduction
This manual describes Dicer’s MIDI communication format. This is all the proprietary information
you need to be able to control Dicer to its full potential.
It is assumed that you already have a basic knowledge of MIDI, and some appropriate software
for writing interactive MIDI applications (for example, Max for Live, Max/MSP, or Pure Data).
Numbers in this manual are given in both hexadecimal and decimal equivalents, as different
software favours the use of different conventions. To avoid any ambiguity, hexadecimal numbers
are always followed by a lower-case h.
2 Dicer MIDI Overview
Dicer is a class-compliant MIDI device. Depending on your operating system, it will appear
automatically to your computer as ‘Dicer’, ‘Novation Dicer’, or ‘USB Audio Device’.
Figure 1. Outline of Dicer, with its eight buttons.
Each unit has eight buttons (Figure 1): three small buttons, and five large buttons. Every mode dice
button is back-lit by a bi-coloured LED that can produce red, a shade of orange or yellow, or green
in a number of intensities.
All MIDI communication with Dicer is conducted using note-on, note-off, and controller change
messages. Note on and note off messages are used to convey button pushes and releases, and
controller change messages are used for configuration data.


Produkt Specifikationer

Mærke: Novation
Kategori: Ikke kategoriseret
Model: Dicer

Har du brug for hjælp?

Hvis du har brug for hjælp til Novation Dicer stil et spørgsmål nedenfor, og andre brugere vil svare dig