Oce OP1020 Advanced Operation Guide Manual
Læs gratis den danske manual til Oce OP1020 Advanced Operation Guide (162 sider) i kategorien Alt i ét. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Oce OP1020 Advanced Operation Guide, eller vil du spørge andre brugere om produktet?
Side 1/162
1.1.1.
Océ OP1016/1020/1025
Printing System
Advanced Operations Guide
Education Services
Océ
Operations Guide
English version
ADVANCED OPERATION GUIDE v
Conventions
This manual uses the following conventions.
Measurements
This guide contains information that corresponds to using both the inch
and metric versions of the machine. The screens and messages shown in
the guide reflect the inch version of the machine. When using the metric
version, refer to the messages on your machine.
Convention Description Example
Italic Typeface Used to emphasise a key word,
phrase or message. In addition,
references to other publications
are displayed in italic typeface.
Open the Multi-Bypass Tray.
Bracket Bold Text
Typeface Used to emphasise the
selection of a feature mode or
key.
Press [Enter].
Notes Used to provide additional or
useful information about a
function or feature. NOTE: To ensure best copying quality,
it is recommended this cleaning task is
performed at least once a month.
Important Use to provide important
information. IMPORTANT: Never use water, thinner
or other organic solvents to clean the slit
glass.
Caution Cautions are statements that
suggest mechanical damage as
a result of an action.
CAUTION: For safety purposes,
always remove the power plug from the
outlet when cleaning the machine.
Warning Used to alert users to the
possibility of personal injury. WARNING: High voltage is present
in the charger section.
vi ADVANCED OPERATION GUIDE
Contents
viii ADVANCED OPERATION GUIDE
Job Accounting Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Managing Accounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Default Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Using Job Accounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15
Appendix
Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-11
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-17
Copy Functions
1-4 ADVANCED OPERATION GUIDE
Original Placement
You must specify the orientation of the original when using the following
functions:
- Duplex Copying
- Split Copying (from 2-sided originals)
- Margin mode
- Border Erase mode
- Combine mode
- Auto Selection mode (Optional)
- Stapling (Optional)
When the originals are positioned on the Platen:
When the originals are loaded in the Document Processor:
NOTE: To change the default setting for Original Orientation, refer to
Original Orientation, on page 3-20.
1Press [Function].
2Press S or T to select Orig.
direction and press [Enter].
3Press S or T to select Rear or
Left top and press [Enter].
Original Rear Left Top
Original Rear Left Top
Continuous Scan
Function:
End
Orig. Direction :
:Rear
Off
Orig. Direction:
Rear
Left top
*
Copy Functions
ADVANCED OPERATION GUIDE 1-5
Offset Mode
Use this mode to change the orientation of the output at the end of each
set for easy division.
NOTE: If the Document Processor (option) or Finisher (option) is not
installed, use this function with Sort copying.
The paper sizes that can be used for Offset copying are A4, B5 and
11 × 8 1/2"
NOTE: Ensure the Auto Rotation feature is On, refer to Auto Rotation, on
page 1-15.
1Position the original and press
[Offset].
2Press [Sort].
3Enter the number of copies
required and press [Start].
If using the optional Document
Processor, copying completes
automatically.
If using the platen, a message
displays when the next original is
required. Position the next original
and press [Start].
When all originals have been scanned, press [Enter].
Copy Functions
1-6 ADVANCED OPERATION GUIDE
Stapling
Copies can be stapled in the upper left or upper right corner.
NOTE: The optional Finisher must be installed.
The orientation of originals and the stapling position is shown below.
1Position the original and press
[Staple].
2Press S or T to select the
stapling position and press
[Enter].
3Press [Start].
If using the optional Document
Processor, copying completes
automatically.
If using the platen, a message
displays when the next original is
required. Position the next original
and press [Start].
When all originals have been scanned, press [Enter].
Original Copy
Original Copy
Staple:Left Top
Right Top
Copy Functions
1-8 ADVANCED OPERATION GUIDE
2 in 1
The following illustrations indicate how the orientation of the original will
affect the resulting copies:
Using the Platen
Using the Document Processor
NOTE: Ensure that the first page of the originals is scanned first.
CopyOriginal
CopyOriginal
CopyOriginal
CopyOriginal
Copy Functions
1-10 ADVANCED OPERATION GUIDE
4 in 1 (Vertical Arrangement)
The following illustrations indicate how the orientation of the original will
affect the resulting copies:
Using the Platen
Using the Document Processor
NOTE: Ensure that the first page of the originals is scanned first.
CopyOriginal
CopyOriginal
CopyOriginal
Copy
Original
Copy Functions
ADVANCED OPERATION GUIDE 1-11
Borderline Types
The following borderline types are available.
Using Combine Mode
1Position the original and press
[Combine].
2Press S or T to select the
combine option required and
press [Enter].
3Press S or T to select the Border
Line type and press [Enter].
Borderline type Copy
2 in 1 4 in 1 (horizontal arrangement)/
4 in 1 (vertical arrangement)
None
Solid
Dotted
Mark or Cropmark
4 in 1 (N)
Combine:
2 in 1
4 in 1 (Z)
Dotted
Border Line:
None
Solid
Copy Functions
ADVANCED OPERATION GUIDE 1-15
Auto Rotation
Use Auto Rotation to automatically rotate images counterclockwise by 90
degrees, if the orientation of the original is different to the paper loaded in
the cassette.
NOTE: To enable Auto Rotation as the default setting, refer to Auto
Rotation Copy, on page 3-11.
The paper sizes that can be used for Auto Rotation are A4, 11 × 8 1/2" or
smaller sizes
NOTE: A3, B4, Folio, 11 × 17" (Ledger) or 8 1/2 × 14" (Legal) cannot be
used for Auto Rotation.
1Position the first original(s) and
press [Function].
2Press S or T to select Auto
Rotation and press [Enter].
3Press S or T to select On and
press [Enter].
Auto Rotation
Function:
Orig. Direction
Continuous Scan :
:Rear
Off
:On
Auto Rotation:
Off
On
*
Printer Settings
2-6 ADVANCED OPERATION GUIDE
Deleting Private Print/Stored Job
Each stored job can be deleted manually as shown below:
1Select the job to delete, refer to Private Print/Stored Job, on page 2-5.
2Press S or T to select Delete and
press [Enter].
Virtual Mailbox
Virtual Mailbox is selected from the printer driver and is used to store jobs
on the machine. A job will remain in a Virtual Mailbox until the 5-digit
access code (set using KM-NET Printer Disk Manager) is entered to
enable the job to print. When the job is printed the data is deleted from the
mailbox.
NOTE: For information about the printer driver options, refer to the KX
Printer Driver Operation Guide.
1Display the e-MPS screen, refer to Access e-MPS, on page 2-3.
2Press S or T to select Print VMB
Data and press [Enter].
3Press S or T to select the
mailbox to print and press
[Enter].
4Use the numeric keys to enter the
five-digit access code set with the
KM-NET Printer Disk Manager,
press [Enter].
Printing starts. Once printing is complete, the document data in the mailbox
is deleted.
Copies
Select User Name
Delete 001:
Quick Copy
Private/Stored
e-MPS
Print VMB Data
Print VMB Data
File B
001:
001 Enter User ID
:File B
Printer Settings
ADVANCED OPERATION GUIDE 2-7
Virtual Mailbox List
A list can be printed which shows the current Virtual Mailbox numbers, the
data stored in a mailbox, the size of data stored and other information.
1Display the e-MPS screen, refer to Access e-MPS, on page 2-3.
2Press S or T to select List of
VMB and press [Enter].
3Press S or T to select Print and
press [Enter].
The virtual mailbox list is printed.
Private/Stored
Print VMB Data
e-MPS
List of VMB
No
Print
List of VMB
VIRTUAL MAIL BOX LIST
Produkt Specifikationer
| Mærke: | Oce |
| Kategori: | Alt i ét |
| Model: | OP1020 Advanced Operation Guide |
Har du brug for hjælp?
Hvis du har brug for hjælp til Oce OP1020 Advanced Operation Guide stil et spørgsmål nedenfor, og andre brugere vil svare dig
Alt i ét Oce Manualer
5 Oktober 2024
22 August 2024
22 August 2024
21 August 2024
21 August 2024
19 August 2024
19 August 2024
19 August 2024
18 August 2024
18 August 2024
Alt i ét Manualer
Nyeste Alt i ét Manualer
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
25 August 2024
23 August 2024
23 August 2024
22 August 2024