OmniMount CCH-1 Manual

OmniMount Ikke kategoriseret CCH-1

Læs gratis den danske manual til OmniMount CCH-1 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om OmniMount CCH-1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Thank you for purchasing an OmniMount product.

Warranty: Limited Lifetime on manufacturing defects and workmanship.

Specifications are subject to change without prior notice.

Every effort has been made to provide accurate and error-free assembly and installation. OmniMount Systems disclaims liability for any difficulties arising from the interpretation of information

contained in these instructions. If OmniMount products are used for purposes other than their original intent, OmniMount, its distributors and retailers shall not be held responsible or liable for

injuries or property damage, direct, indirect, or consequential, which may arise from the inability to use this product safely, properly, and in the manner for which it has been designed and manu-

factured. Warranty does not apply to products which have been lost, damaged by misuse, abuse, or accident.

OmniMount Systems, Inc.

8201 South 48th Street • Phoenix, AZ 85044-5355

1-800-MOUNT-IT • www.omnimount.com

P/N 1002290 — Rev. B 5/2005

Remove backing strip Rubber Pads (10), and press onto bottom of Foot Assembly and front edge of Shelf.

Thread Shelf Pegs (2) into holes on front edge of Shelf (1). (Fig. 19)

Place CCH1 on top of TV, with Shelf Pegs overlapping front edge of TV, as

shown in Fig. 20.

Loosen hex screw and slide Leg In or Out until Shelf sits level, then secure

Leg in position with hex wrench.

Note: Maximum extension is shown in Fig 20.

For additional minor adjustments, thread Foot Assembly In or Out of Leg

until Shelf sits level. Tighten Lock Nut (7) against leg to hold level posi-

tion.

Proceed to section titled Mounting Components to CCH-1

Mounting Components to the CCH-1

The CCH-1 is the ideal companion for any home theater system, and provides a conven-

ient mounting solution for various components, such as:

• Center channel speaker

• DVD player

• Cable/Satellite box

• Video game console

• VCR

The primary considerations when mounting a component to the CCH-1 are:

1. NEVER exceed the maximum weight capacity of 30 lbs. (13.6 Kg)

2. Make sure that the shelf pegs overlap the front edge of the TV

3. Place the component all the way to the front of the CCH-1, as shown in Fig 21.

Warning: NEVER place component towards rear of shelf, or it may become unstable

and tip backwards off of the TV. (Fig 22)

Fig. 19

Fig. 20

Fig. 21

Fig. 22

CCH-1:

Center Channel Shelf

Installation Instructions

Questions? 1-800-MOUNT IT (USA only)

• Ideal for center channel speaker or A/V component

• Fits on top of video display

• Variable mounting: fits CRT/LCD/DLP

• All steel construction

• Scratch resistant powder coat finish

• Maximum weight capacity: 30 lbs. (13.6 Kg)

ID Description Qty

Shelf 1

2 2 Shelf Pegs

3 2 Foot Assembly

4 2 Leg Assembly

5 Extended Leg

6 2 Spacer

7 2 Lock Nut

8 2 Support Screw

9 1 Hex Wrench

Rubber Pad 4

The CCH-1 has been designed to fit on the widest possible range of TV’s. Assembly and installation of the CCH-1 will vary, de-

pending upon your TV type: CRT TV or DLP/LCD Projection TV. Proceed to the section related to your TV type.

A—Shallow Back

Thread Foot Assemblies (3) into Spacers (6). (Fig. 3)

Attach Foot Assemblies to position 2 on Shelf with Support Screws (8).

(Fig 4)

CCH-1

Fig. 3

Installing on CRT TV

First, determine your chassis style:

A—Shallow Back (Fig 1)

B—Steep Back (Fig 2).

Fig. 1

Fig. 2

B—Steep Back

xtend Leg from Leg Assembly (4) using Hex Wrench (9). Thread Foot Assem-

bly (3) into Leg Assembly(4). (Fig 7).

Attach Leg Assemblies to position 2 on Shelf with Support Screws (8). (Fig 8)

Fig. 7

Remove backing strip Rubber Pads (10), and press onto bottom of Foot Assembly (3) and front edge of

Shelf. (Fig. 5)

Thread Shelf Pegs (2) into holes on front edge of Shelf (1). (Fig. 5)

Place CCH1 on top of TV, with Shelf Pegs overlapping front edge of TV, as

shown in Fig. 6.

Thread Foot Assembly In or Out of Spacer until Shelf sits level.

Note: Maximum foot extension is shown in Fig 6.

Tighten Lock Nut (7) against leg to hold level position.

Proceed to section titled Mounting Components to CCH-1.

Fig. 5

Fig. 8

Fig. 4

Fig. 6

Remove backing strip Rubber Pads (10), and press onto bottom of Foot Assembly and front edge of Shelf.

(Fig. 9)

Thread Shelf Pegs (2) into holes on front edge of Shelf (1). (Fig. 9)

Fig. 9

Place CCH1 on top of TV, with Shelf Pegs overlapping front edge of TV, as shown in Fig. 10.

Loosen hex screw and slide Leg In or Out until Shelf sits level, then

secure Leg in position with hex wrench.

Note: Maximum extension is shown in Fig 10.

For additional minor adjustments, thread Foot Assembly In or Out of

Leg until Shelf sits level. Tighten Lock Nut (7) against leg to hold

level position.

Proceed to section titled Mounting Components to CCH-1.

Installing on DLP/LCD Projection TV

First, determine your chassis style:

C—Shallow Back (Fig 11)

D—Steep Back (Fig 12).

C—Shallow Back

Extend Leg from Leg Assembly (4) using Hex Wrench (9). Thread

Foot Assembly (3) into Leg Assembly(4). (Fig 13).

Attach Leg Assemblies to position 1 on Shelf with Support Screws

(8). (Fig 14)

Fig. 13

Remove backing strip Rubber Pads (10), and press onto bottom of Foot Assembly and front edge of Shelf.

Thread Shelf Pegs (2) into holes on front edge of Shelf (1). (Fig. 15)

Place CCH1 on top of TV, with Shelf Pegs overlapping front edge of

TV, as shown in Fig. 16.

Loosen hex screw and slide Leg In or Out until Shelf sits level, then

secure Leg in position with hex wrench.

Note: Maximum extension is shown in Fig 16.

For additional minor adjustments, thread Foot Assembly In or Out of Leg until Shelf sits

level. Tighten Lock Nut (7) against leg to hold level position.

Proceed to section titled Mounting Components to CCH-1.

D—Steep Back

Remove

Leg from Leg Assembly (4) using Hex Wrench (9). Install Ex-

tended Leg (5) into Leg Assembly (4) using Hex Wrench (9). Thread

Foot Assembly (3) into Leg Assembly(4). (Fig 17).

Attach Leg Assemblies to position 1 on Shelf with Support Screws (8).

(Fig 18)

Fig. 14

Fig. 11

Fig. 12

Fig. 15

Fig. 17

Fig. 18

Fig. 10

Fig. 16

Produkt Specifikationer

Mærke:	OmniMount
Kategori:	Ikke kategoriseret
Model:	CCH-1

Har du brug for hjælp?

Hvis du har brug for hjælp til OmniMount CCH-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret OmniMount Manualer

OmniMount U3 Tilt Manual

30 Juli 2025

OmniMount 75/100 CL Manual

30 Juli 2025

OmniMount CMK Mini Manual

10 Juli 2025

OmniMount Silhouette 65 Manual

9 Juli 2025

OmniMount PROHDCART Manual

9 Juli 2025

OmniMount RSF Manual

9 Juli 2025

OmniMount LDC31 Manual

9 Juli 2025

OmniMount Echo A3 Manual

9 Juli 2025

OmniMount RE42 Manual

9 Juli 2025

OmniMount Modena 47FP Manual

9 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Crestron FT2A-PWR-US-3 Manual

9 September 2025

Crestron FT2A-PWR-SW-1-BASIC Manual

9 September 2025

Crestron FT2A-PWR-US-1-BASIC Manual

9 September 2025

Crestron Green Light GL-EXP-DIMU-DALI Manual

9 September 2025

LightZone GT-TK-01 Manual

9 September 2025

Crestron FT2A-UTK-SHELF Manual

9 September 2025

DS18 NXL-DLRING10 Manual

9 September 2025

Dasqua 2000-2015 Manual

9 September 2025

Camille Bauer SIRAX BT7100 Manual

9 September 2025

Erica Synths Echolocator Manual

9 September 2025