OmniMount OBLP120T Manual


Læs nedenfor 📖 manual på dansk for OmniMount OBLP120T (16 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.9 stjerner i gennemsnit af 2.5 brugere

Side 1/16
Instruction Manual / Manual De Instrucciones
OBLP120T = L2-OM1100370-CON-080111vD
OBLP120T
LOW PROFILE FLAT PANEL TILT MOUNT
V
ERSION D
Reduce.Reuse.Recycle
Max screen size: 63”
Max weight 120 lbs – 54.4 kg
HAVE A SMARTPHONE?/ ¿TIENES UN TELEFONO INTELIGENTE?
Scan this QR code with your Smartphone to see
a short installation video. This installation video
is for demonstration purposes only. Please refer
to this manual for complete instructions
CAUTION: DO NOT EXCEED MAXIMUM
LISTED WEIGHT CAPACITY. SERIOUS
INJURY OR PROPERTY DAMAGE MAY
OCCUR
!
ISSUES/QUESTIONS? / ¿PREGUNTAS?
to
this
manual
for
complete
instructions
.
Escanear este codigo QR con su teléfono inteligente para
ver un corto video de instalación. Este video de instalación
es con proposito de demostracion. Consulte el manual
para completar las instrucciones.
STOP
Before you return this product to Sam’s Club,
please let us help you. You can reach us by
phone 24/7 at 877.PLUGD.IN (877.758.4346).
STOP
PARADA
Antes de devolver este producto al Sam’s Club, por
favor, déjenos ayudarle. Usted puede contactarnos por
teléfono 24/7 llame al 877.PLUGD.IN (877.758.4346).
SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM IMPROPER
INSTALLATION OR ASSEMBLY. READ THE FOLLOWING WARNINGS BEFORE BEGINNING.
If you do not understand the instructions or have any concerns or questions, please contact us 24/7 at
877.PLUGD.IN
(
877.758.4346
)
.
WARNING!
()
Do not install or assemble if the product or hardware is damaged or missing. If you require replacement parts
please call 877.PLUGD.IN (877.758.4346).
FOR WALL MOUNTED PRODUCT:
This product has been designed for use on a vertical wall constructed of
wood studs or solid concrete. Wood studs being defined as a wall consisting of a minimum of 2” x 4” studs
with a maximum of 24
stud spacing and a minimum of 16
stud spacing with a maximum of ½
inch of wall
with
a
maximum
of
24
stud
spacing
and
a
minimum
of
16
stud
spacing
with
a
maximum
of
½
inch
of
wall
covering (drywall, lath, plaster). For custom installations please contact 877.PLUGD.IN (877.758.4346). For
safe installation, the wall you are mounting to must support 4 times the weight of the total load (flat panel and
wall mount). If not, the surface must be reinforced to meet this standard. The installer is responsible for
verifying that the wall structure/surface and the anchors used in the installation will safely support the total
load. Do not use this product for any application other than those specified by OmniMount.
This product may contain moving parts. Use with caution.
DO NOT EXCEED THE MAXIMUM WEIGHT CAPACITY FOR THIS PRODUCT.
¡ADVERTENCIA!
LA INSTALACIÓN O EL MONTAJE INAPROPIADOS PUEDEN PROVOCAR LESIONES, DAÑOS
MATERIALES O INCLUSO LA MUERTE
ANTES DE COMENZAR LEA LAS SIGUIENTES
MATERIALES
O
INCLUSO
LA
MUERTE
.
ANTES
DE
COMENZAR
,
LEA
LAS
SIGUIENTES
ADVERTENCIAS.
Si las instrucciones no le resultan claras o si tiene alguna duda o pregunta, comuníquese con un instalador calificado. Si
el producto o el hardware está dañado o no se le envió alguna pieza, no realice la instalación ni el montaje. Si necesita
piezas de repuesto, comuníquese con el servicio de Atención al cliente llame al 877.PLUGD.IN (877.758.4346).
Para montaje en la pared: Este producto está diseñado para ser instalado en paredes verticales con paneles de madera u
hormigón Se define a los paneles verticales como una pared que consiste de un mínimo de paneles de 5 x 10 cm con un espacio
hormigón
.
Se
define
a
los
paneles
verticales
como
una
pared
que
consiste
de
un
mínimo
de
paneles
de
5
x
10
cm
con
un
espacio
entre paneles máximo de 60 cm y un espacio mínimo entre paneles de 41 cm, con un máximo de cobertura de pared (hoja de
yeso, listón, yeso) de 13 mm. Para instalaciones a medida contacte 877.PLUGD.IN (877.758.4346). Para realizar una instalación
segura, la pared elegida debe ser capaz de soportar 4 veces el peso de la carga total (montaje plano del panel y de la pared). De
lo contrario, deberá reforzar la superficie para que cumpla con este requisito. El instalador es el responsable de comprobar quela
estructura/superficie de la pared y los tacos que se utilizan en la instalación soporten la carga total de manera segura.
Este producto puede contener componentes móviles. Úselo con precaución.
MAXIMUM WEIGHT CAPACITY
MÁXIMA CAPACIDAD DE PESO
POUNDS (LBS) / KILOGRAMS (KG)
LIBRAS (LB) / KILOGRAMOS (KG)
MAXIMUM SCREEN SIZE
TAMAÑO DE PANTALLA MÁXIMO
63”
NO EXCEDA LA CAPACIDAD DE PESO MÁXIMA PARA ESTE PRODUCTO.
COMPLETE UNIT 120 (LBS) / 54.4 (KG) 63 in. (160 cm)
USE WITH FLAT PANELS LARGER THAN THE MAXIMUM
WEIGHT AND/OR SCREEN SIZE MAY RESULT IN
INSTABILITY CAUSING POSSIBLE INJURY.
P2
120 lbs
54.4 kg
EL USO CON DE LA MONTURA CON TELEVISORES MÁS
GRANDES QUE EL PESO O EL TAMAÑO MAXIMO PUEDES
PROVOCAR LA FALLA DE LA MONTURA Y PROVOCAR LESIONES.


Produkt Specifikationer

Mærke: OmniMount
Kategori: Ikke kategoriseret
Model: OBLP120T

Har du brug for hjælp?

Hvis du har brug for hjælp til OmniMount OBLP120T stil et spørgsmål nedenfor, og andre brugere vil svare dig