Oppo Reno 8 Lite 5G Manual

Oppo Telefon Reno 8 Lite 5G

Læs gratis den danske manual til Oppo Reno 8 Lite 5G (12 sider) i kategorien Telefon. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Oppo Reno 8 Lite 5G, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

REFRIGERATOR/FREEZER COMBINATION

Contents

Installation, 2-3

Positioning and connection

Reversible doors

Description of the appliance, 4-5

Control panel

Overall view

Start-up and use, 6-7

Starting the appliance

Chiller system

Using the refrigerator to its full potential

Using the freezer to its full potential

Maintenance and care, 8

Switching the appliance off

Cleaning the appliance

Avoiding mould and unpleasant odours

Replacing the light bulb

Precautions and tips, 9

General safety

Disposal

Respecting and conserving the environment

Troubleshooting, 10

Guarantee, 11

After Sales Service, 12

Operating Instructions

English

FFB6200AP

Installation

! Before placing your new appliance into operation

please read these operating instructions carefully. They

contain important information for safe use, for installation

and for care of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to possible new owners of the

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free

room.

2. Do not obstruct the rear fan grills. The compressor

and condenser give off heat and require good

ventilation to operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part

of the appliance and any furniture above it, and at

least 5 cm between the sides and any furniture/side

walls.

4. Ensure the appliance is away from any sources of

heat (direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers

supplied in the installation kit, following the

instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the

refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully

place it vertically and wait at least 3 hours before

connecting it to the electricity mains. Before inserting the

plug into the electrical socket ensure the following:

 The appliance is earthed and the plug is compliant

with the law.

 The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located

on the bottom left side of the fridge (e.g. 150 W).

 The voltage must be in the range between the values

indicated on the data plate located on the bottom left

side (e.g. 220-240V).

 The socket is compatible with the plug of the

appliance.

If the socket is incompatible with the plug, ask an

authorised technician to replace it (see Assistance).

Do not use extension cords or multiple sockets.

! Once the appliance has been installed, the power

supply cable and the electrical socket must be easily

accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should these

safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that

can be plugged into a 13amp socket for immediate use.

Before using the appliance please read the instructions

below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved

fuse to BS 1362 should always be used and the fuse

cover re-fitted.

If the fuse cover is lost, the plug must not be used until a

replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the

correct colour as indicated by the coloured marking or the

colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug

and you should wish to remove it to add a longer cable

or to re-route the mains cable through partitions, units

etc. please ensure that either:

- The plug is replaced by a fused 13amp re-

wireable plug bearing the BSI mark of

approval.

- The mains cable is wired directly into a

13amp cable outlet, controlled by a

switch (in compliance with BS 5733)

which is accessible without moving the

appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit

your socket. The cable should be cut as close as

possible to the moulded plug.

Remove the fuse.

Produkt Specifikationer

Mærke:	Oppo
Kategori:	Telefon
Model:	Reno 8 Lite 5G

Har du brug for hjælp?

Hvis du har brug for hjælp til Oppo Reno 8 Lite 5G stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Telefon Oppo Manualer

8 August 2024

31 Juli 2024

31 Juli 2024

30 Juli 2024

29 Juli 2024

Oppo Reno 7 5G Manual

28 Juli 2024

Oppo Reno 3 A Manual

27 Juli 2024

Oppo Reno 5Z Manual

27 Juli 2024

Oppo K10 Vitality Manual

27 Juli 2024

Oppo A17k Manual

27 Juli 2024

Telefon Manualer

Nyeste Telefon Manualer

Yealink SIP-T31W Manual

30 Juli 2025

Nokia 105 Classic Manual

30 Juli 2025

HMD 105 Pure Manual

30 Juli 2025

HMD 101 4G Manual

30 Juli 2025

Thomson 512263 Manual

27 Juli 2025

Panasonic KX-TGDA63 Manual

26 Juli 2025

Panasonic KX-TGDA99 Manual

26 Juli 2025

Panasonic KX-TGE610 Manual

26 Juli 2025

Panasonic KX-TGDA83 Manual

26 Juli 2025

Panasonic KX-TGDA66 Manual

26 Juli 2025