Ozito ADWH-913V Manual

Ozito Ikke kategoriseret ADWH-913V

Læs gratis den danske manual til Ozito ADWH-913V (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Ozito ADWH-913V, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

AUTO DARKENING

WELDING HELMET

INSTRUCTION MANUAL

Viewing Window: 92.5 x 42.5mm

Switching Time: ≤3/10,000s (Light to Dark)

Power Supply: 3V Lithium Battery (CR2450)

& Solar Power

Light State: Shade 4

Dark State: Shade 5-9 | 9-13

Operating Temp.: -5 to 55°C

No. of Sensors: 2

Weight: 0.94kg

ADWH-913V

STANDARD EQUIPMENT

WARRANTY

OZITO 25 Fox Drive, Dandenong South, Victoria, Australia 3175.

ozito.com.au

Auto Darkening Welding

Helmet & CR2450 Battery

(Fitted)

1021

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE

WITH YOUR BUNNINGS REGISTER RECEIPT.

PRIOR TO RETURNING YOUR PRODUCT

FOR WARRANTY PLEASE TELEPHONE OUR

CUSTOMER SERVICE HELPLINE:

Australia: 1800 069 486

New Zealand: 0508 069 486

The beneﬁts provided under this warranty are in addition to other rights and remedies

which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to a

replacement or refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced

if the goods fail to be of acceptable quality and the failure does not amount to a major

failure.

Generally you will be responsible for all costs associated with a claim under this warranty,

however, where you have suffered any additional direct loss as a result of a defective

product you may be able to claim such expenses by contacting our customer service

helpline above.

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE

RELATING TO THE WARRANTY POLICY OR

PROCEDURE.

WELDING HELMET WARNINGS

WARNING! The appliance is not to be used by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction.

Young children should be supervised to ensure that they do not play with the

appliance.

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR

YOUR WELDING HELMET. Serious personal injury may occur if these warnings are

ignored.

• The auto darkening welding helmet is not suitable for laser welding and

oxygen acetylene welding.

• Do not put the helmet near ﬂames or in damp places.

• Before operation, please conﬁrm that the welding or grinding function is

correctly selected.

• Before operation, tear off the protective ﬁlm from the lens.

• Cease using the helmet immediately if the ﬁlter does not darken on exposure

to UV/IR light. Contact Ozito customer service for further instructions. Arc rays

from the welding process produce intense visible and invisible (ultraviolet and

infrared) rays that can burn eyes and skin. Sparks ﬂy off from the weld.

• Do not attempt to replace or modify parts of the helmet.

• Do not remove the ﬁlter protective plate or the ﬁlter.

• Do not use alcohol, petrol, or thinners to clean the ﬁlter.

• Do not immerse the helmet in water.

• Optimum operating temperature is between -5 to 55°C (23 to 131°F). The auto

darkening function may react slower outside of this range.

• Contact Ozito customer service for further instructions if the protective ﬁlms

are broken or scratched.

• Contact Ozito customer service for further if the ﬁlter protective plate is broken

or scratched. To prevent damage to the ﬁlter, do not use hard objects near it.

• Clean the ﬁlter surface, sensors, and solar cells regularly.

• This welding helmet does not provide protection against serious impact,

explosives, or corrosive liquid damage.

• The Auto darkening ﬁlter must have outside protective lens installed to prevent

potential irreparable damage. Do not use auto darkening welding helmet with

any of the lenses removed.

• Change scratched or broken lens that reduces visual ﬁeld and protection level.

• Frequently clean the sweatband.

• Do not remove the auto darkening ﬁlter from the helmet. Never try to open

the ﬁlter.

• Before welding, adjust the auto-darkening lens sensitivity setting to meet the

application. Ensure the correct shade is used for the application.

• Wear approved safety glasses with side shields and ear protection under your

helmet.

• Use protective screens or barriers to protect others from ﬂash, glare, and

sparks; warn others not to watch the arc.

• Wear body protection made from durable, ﬂame resistant material (leather,

heavy cotton wool).

• Do not weld in the overhead position while using this helmet.

• Inspect the auto-lens frequently. Immediately replace any scratched, cracked,

or pitted cover lenses or auto-lenses.

• Use only genuine replacement parts from the manufacturer.

• Welding produces fumes and gases. Breathing these fumes and gases can

be hazardous to your health. Keep your head out of the fumes. Do not breathe

the fumes.

• Only work in a well-ventilated environment.

• Read and understand the Safety Data Sheets (SDS) and the manufacturer’s

instructions for adhesives, coatings, cleaners, consumables, coolants,

degreasers, ﬂuxes, and metals.

• Do not weld in locations near degreasing, cleaning, or spraying operations.

The heat and rays of the arc can react with vapours to form highly toxic and

irritating gases.

• Do not weld on coated metals, such as galvanized, lead, or cadmium plated

steel. The coatings and any metals containing these elements can give off

toxic fumes if welded.

• Button batteries pose a serious hazard to children. If swallowed, in addition to

presenting a choking hazard, a button battery can get stuck in a child’s throat

and cause a chemical reaction that burns through tissue causing catastrophic

bleeding. Keep Auto Darkening Welding Helmet and button batteries out

of sight and out of reach of small children. Dispose of old or spent button

batteries you have removed from a product immediately. Flat batteries can still

be dangerous.

• If you think a child has swallowed or inserted a button battery, contact the

Poisons Information Centre on 13 11 26 (Australia) or 0800 764 766 (NZ) for

24/7 expert advice.

• Do not store lens cartridge in a location near a heat source or in a high

moisture environment.

1 YEAR REPLACEMENT WARRANTY*

Your product is guaranteed for a period of 12 months from the original date of

purchase. If a product is defective it will be replaced in accordance with the terms of

this warranty. Warranty excludes consumable parts, for example: valve adapters and

accessories.

*This product is intended for DIY use only and replacement warranty covers domestic use.

WARNING

The following actions will result in the warranty being void.

If the tool has been operated on a supply voltage other than that speciﬁed on the tool.

If the tool shows signs of damage or defects caused by or resulting from abuse, accidents

or alterations.

Failure to perform maintenance as set out within the instruction manual.

If the tool is disassembled or tampered with in any way.

Professional, industrial or high frequency use.

VARIABLE SHADE 5-9 9-13

SENS IT IVITY

DELAY

LO W HIG H

MI N MAX

OZITO ADWH-913V

SHADE: 4 / 5-9 / 9-13

AS/NZS 1337.1 V & 1338.1

MADE IN CHI NA

LOW

YBAT T ER

TEST

WELD (9-13)

GRIND (4)

( 5 - 9 )

KNOW YOUR PRODUCT

1. UV/IR FILTER

SETUP & PREPARATION

ONLINE MANUAL

Scan this QR Code with your mobile

device to take you to the online manual.

1. Solar Panel

2. Arc Sensor

3. UV/IR Filter

4. Shade Adjustment Dial

5. Locking Knob

6. Auto Darkening Test Button

7. Low Battery Indicator

8. Mode Selector

9. Sensitivity Control Dial

10. Delay Time Control Dial

11. Lithium Battery Cover

AUTO DARKENING WELDING HELMET

7 8 9 10 11

Checking The Battery

Before ﬁrst use, pull and remove the plastic tab to engage the

battery contact.

WARNING! ALWAYS CHECK THAT THE AUTO

DARKENING FEATURE IS FUNCTIONING AS NORMAL

BEFORE ATTEMPTING TO WELD. FAILURE TO DO SO

MAY RESULT IN INJURY TO YOUR CORNEAS.

1. Set the mode slider to

‘WELD’.

Note: The test function will

not work if the slider is set to

‘GRIND’.

2. Press the ‘TEST’ button.

The viewing window should

darken brieﬂy before

returning to normal.

Note: The timing between dark state to light state will correspond

with the delay setting. Refer to Delay time in 3. Controls section.

Note: Remove the protective ﬁlm from the lenses before use.

Solar Panel

WARNING! ENSURE THAT ALL OPERATING PARTS ARE

CLEAN & UNDAMAGED BEFORE USE. SCRATCHED OR

BROKEN PARTS SHOULD BE REPLACED IMMEDIATELY.

WARNING! DO NOT USE AUTO DARKENING WELDING

HELMET IF THE SOLAR PANEL IS DAMAGED OR

COVERED.

The solar panel works in

conjunction with the battery to

provide power to the welding

helmet. The helmet will not

work with the solar panel

blocked.

SENSITIVIT Y

LOW HIGH

MIN

OZITO ADWH-913V

SHADE: 4 / 5-9 / 9-13

AS/NZS

LOW

BATTERY

TEST

WELD (9-13)

GRIND (4)

( 5 - 9 )

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Ikke kategoriseret
Model:	ADWH-913V

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito ADWH-913V stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Ozito Manualer

Ozito PXLMB-335 Manual

19 August 2025

Ozito PXCG-080 Manual

29 Juli 2025

Ozito PXGAR-500 Manual

29 Juli 2025

Ozito PXSK-2518 Manual

22 Juni 2025

Ozito PXBPS-1828 Manual

2 Juni 2025

Ozito PXLEK-1840 Manual

5 Januar 2025

Ozito PXBGSS-1815 Manual

10 December 2024

Ozito PXBSPS-180 Manual

6 Oktober 2024

Ozito SSH-240 Manual

6 Oktober 2024

Ozito DMC-1000 Manual

20 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vestil HPRO-SS-36-42-4 Manual

2 Oktober 2025

VitalMaxx 01260 Manual

2 Oktober 2025

Vestil VAN-J-AC Manual

2 Oktober 2025

Vestil LPRO-92-9-4 Manual

2 Oktober 2025

Vollrath 7217810 Manual

2 Oktober 2025

Draper Expert 19224 Manual

2 Oktober 2025

Vestil AHSN-4-15-7-TLC Manual

2 Oktober 2025

Draper Storm Force 65019 Manual

2 Oktober 2025

VitalMaxx 06870 Manual

2 Oktober 2025

Advantech ARK-3532D Manual

2 Oktober 2025