Ozito EPP-751 Manual
Ozito
Hækkeklipper
EPP-751
Læs nedenfor 📖 manual på dansk for Ozito EPP-751 (8 sider) i kategorien Hækkeklipper. Denne guide var nyttig for 39 personer og blev bedømt med 4.5 stjerner i gennemsnit af 20 brugere
Side 1/8
3/8” LP
33
3/8” LP33
TELESCOPIC
POLE PRUNER
750W 200MM
INSTRUCTION MANUAL
SPECIFICATIONS
Input Power: 750W
No Load Speed: 5,800/min
Chain Speed: 11m/s
Bar Length: 200mm
Telescopic Range: 1.80-2.56m
Max. Cutting Width: 180mm
Oil Tank: 100ml
Noise Rating: 100dB
Weight: 3.10kg
EPP-751
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of 36 months from the original date of purchase. If
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: bearings, guide bar & chain.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the machine.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
Telescopic Pole Pruner
Chain & Bar
0922
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Shoulder Strap
Guide Bar Cover
3/8” LP
33
3/8” LP
33
Cutter
Sprocket
3/8” LP
33
Fitting the guide bar and chain
1. Loosen the chain cover lock and remove the chain sprocket
cover.
1. Chain
2. Guide bar
3. Chain sprocket cover
4. Motor housing
5. Telescopic tube collar
6. Main tube
7. Shoulder strap retainer
8. Soft grip handle
9. Rear handle
10. Oil tank cap
11. Chain tension dial
12. Chain cover lock
13. Safety switch
14. Extension cord retainer
15. Trigger switch
16. Guide bar cover
17. Shoulder strap
TELESCOPIC POLE PRUNER
ACCESSORIES
KNOW YOUR PRODUCT
1. CHAIN & BAR ASSEMBLY
SETUP & PREPARATION
1
2
3
4
8
9
5
10 11 12
6
7
WARNING! ENSURE THE MACHINE IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
13
14 15
WARNING! THE CHAIN HAS SHARP EDGES, FOR YOUR
OWN SAFETY, PLEASE USE WORK GLOVES. NEVER
TOUCH THE CHAIN OR SERVICE THE UNIT WITH THE
POWER SUPPLY CONNECTED.
2. Place the chain in the groove of the guide bar as shown.
Refer to the image printed on the guide bar that indicates the
direction that the chain should face.
WARNING! IF THE CHAIN IS INSTALLED BACKWARDS
(CHAIN CUTTERS FACING IN THE OPPOSITE DIRECTION
OF ROTATION) THE POLE PRUNER WILL VIBRATE
EXCESSIVELY AND NOT CUT.
3. Place the guide bar and chain onto the mount, ensuring that the
chain sits around the chain sprocket.
4. Re-mount the chain sprocket cover and softly-tighten the chain
cover lock.
NOTE: Only tighten the chain cover lock securely once the chain
tension has been adjusted (see: Tensioning the chain).
7
16
17
Produkt Specifikationer
| Mærke: | Ozito |
| Kategori: | Hækkeklipper |
| Model: | EPP-751 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Ozito EPP-751 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Hækkeklipper Ozito Manualer
10 Oktober 2024
2 Oktober 2024
1 September 2024
25 August 2024
25 August 2024
15 August 2024
14 August 2024
12 August 2024
12 August 2024
8 August 2024
Hækkeklipper Manualer
- Hækkeklipper Shindaiwa
- Hækkeklipper Kingcraft
- Hækkeklipper Garden Groom
- Hækkeklipper Tanaka
- Hækkeklipper Husqvarna
- Hækkeklipper Wolf Garten
- Hækkeklipper Bosch
- Hækkeklipper Ferrex
- Hækkeklipper LawnMaster
- Hækkeklipper Lawn Star
- Hækkeklipper Cramer
- Hækkeklipper Cotech
- Hækkeklipper Gardena
- Hækkeklipper Fuxtec
- Hækkeklipper Robust
Nyeste Hækkeklipper Manualer
10 Juni 2025
31 Maj 2025
3 April 2025
29 Marts 2025
12 Januar 2025
12 Januar 2025
7 Januar 2025
5 Januar 2025
2 Januar 2025
31 December 2025