Ozito ODMM-300 Manual

Ozito Laservandpas ODMM-300

Læs gratis den danske manual til Ozito ODMM-300 (8 sider) i kategorien Laservandpas. Denne vejledning er vurderet som hjælpsom af 61 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 31 anmeldelser. Har du et spørgsmål om Ozito ODMM-300, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

300 300

200 200

200m

OF F

200

200µ

20µ

20k

200k 200m

20m

10A

VmA

10A

CO M

300 300

200 200

200m

OFF

200

200µ

20µ

20k

200k 200m

20m

10A

VmA

10A

COM

DIGITAL

MULTIMETER

300V 10A

INSTRUCTION MANUAL

SPECIFICATIONS

Power: 9V DC Battery

Voltage: 200 - 300V (AC)

0.2 - 300V (DC)

Current: 20µ - 10A (DC)

Resistance: 200 - 2MΩ

Diode Check: 2.2V (Open Circuit Voltage)

Continuity Check: <20Ω

Operating Temperature: 0 to 40°C, <75%RH

Weight: 0.23kg

ODMM-300

STANDARD EQUIPMENT

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from the

original date of purchase. If a product is defective it will be replaced

in accordance with the terms of this warranty. Warranty excludes

consumable parts, for example: valve adapters and accessories.

WARNING! The following actions will result in the warranty

being void.

• If the tool has been operated on a supply voltage other than that

speciﬁed on the tool.

• If the tool shows signs of damage or defects caused by or

resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction

manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE

RELATING TO THE WARRANTY POLICY OR

PROCEDURE.

OZITO Australia/New Zealand (Head Ofﬁce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

ozito.com.au

Digital Multimeter

Test Lead Set & 9V Battery

1019

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings and instructions

may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference. The

term “power tool” in the warnings refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite

accidents.

b. Do not operate power tools in explosive atmospheres, such as

in the presence of ammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in

any way. Do not use any adapter plugs with earthed (grounded)

power tools. Unmodied plugs and matching outlets will reduce risk of

electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as

pipes, radiators, ranges and refrigerators. There is an increased risk

of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering

a power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled cords increase the risk

of electric shock.

e. When operating a power tool outdoors, use an extension cord

suitable for outdoor use. Use of a cord suitable for outdoor use

reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired

or under the inuence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in serious personal

injury.

b. Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate conditions will reduce

personal injuries.

c. Prevent unintentional starting. Ensure the switch is in the o󰀨-

position before connecting to power source and/or battery pack,

picking up or carrying the tool. Carrying power tools with your nger

on the switch or energising power tools that have the switch on invites

accidents.

d. Remove any adjusting key or wrench before turning the power tool

on. A wrench or a key left attached to a rotating part of the power tool

may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

h. Do not let familiarity gained from frequent use of tools allow you

to become complacent and ignore tool safety principles. A careless

action can cause severe injury within a fraction of a second.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer at

the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on and o󰀨.

Any power tool that cannot be controlled with the switch is dangerous

and must be repaired.

c. Disconnect the plug from the power source and/or the battery pack

from the power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to

operate the power tool. Power tools are dangerous in the hands of

untrained users.

e. Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may a󰀨ect the

power tool’s operation. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools

with sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance

with these instructions, taking into account the working conditions

and the work to be performed. Use of the power tool for operations

di󰀨erent from those intended could result in a hazardous situation.

h. Keep handles and grasping surfaces dry, clean and free from oil

and grease. Slippery handles and grasping surfaces do not allow for

safe handling and control of the tool in unexpected situations.

5. Service

a. Have your power tool serviced by a qualied repair person using

only identical replacement parts. This will ensure that the safety of

the power tool is maintained.

The beneﬁts provided under this warranty are in addition to other

rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You

are entitled to a replacement or refund for a major failure and for

compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the

goods fail to be of acceptable quality and the failure does not amount

to a major failure.

Generally you will be responsible for all costs associated with a claim

under this warranty, however, where you have suffered any additional

direct loss as a result of a defective product you may be able to claim

such expenses by contacting our customer service helpline above.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Laservandpas
Model:	ODMM-300

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito ODMM-300 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Laservandpas Ozito Manualer

Ozito LCL-360G Manual

27 August 2024

Ozito LCL-10R Manual

27 August 2024

Ozito SDR-050 Manual

13 August 2024

Ozito ODTH-100 Manual

6 August 2024

Ozito LLT-3600U Manual

6 August 2024

Ozito LMR-025 Manual

2 August 2024

Ozito LLR-005 Manual

1 August 2024

Ozito LCT-1805 Manual

14 Januar 2024

Ozito TLR-090A Manual

11 Juni 2023

Ozito ODSM-130D Manual

1 December 2022

Laservandpas Manualer

Nyeste Laservandpas Manualer

Johnson Level 40-6624 Manual

14 Oktober 2025

Johnson Level 40-6648 Manual

8 Oktober 2025

NEO Tools 75-106 Manual

28 September 2025

Flex RC-ALC 3/360 Manual

17 September 2025

Laserliner SmartCross-Laser GX Manual

7 September 2025

Milwaukee M12 3632-21 Manual

4 September 2025

Laserliner MasterPlane-Laser 3G Manual

31 August 2025

Vonroc LL503DC Manual

24 August 2025

Milwaukee RD1200 Manual

21 August 2025

DeWalt DCLE34520 Manual

18 August 2025