Ozito PXBPRS-018 Manual

Ozito Ikke kategoriseret PXBPRS-018

Læs gratis den danske manual til Ozito PXBPRS-018 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Ozito PXBPRS-018, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

STANDARD EQUIPMENT

5 6

½”

1”

1½”

5m m

10mm

15mm

20m m

25m m

5 6

½”

1”

1½”

5mm

10mm

15mm

20mm

25mm

PXBPRS-018

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 18V

No Load Speed: 10,000 - 30,000/min

Collet Size: 6.35mm & 8mm

Max. Cutter Size: 28mm

Dust Port Size: Ø35mm

Weight: 2.8kg

ozito.com.au

1022

Brushless Plunge Router

Dust Extraction Port & Parallel

Guide

8mm Collet, Compass Point &

2 x Spanners (22 & 13mm)

PLUNGE

ROUTER

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, VIC 3175, Australia.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

1”

1½”

5mm

10mm

15mm

20mm

25mm

1. Depth Adjustor

2. Depth Scale

3. Battery Seating

4. Speed Control Dial

5. Lock Off Switch

6. On/Off Switch

7. Plunge Handles

8. Plunge Router Base

9. Collet Nut

10. Guide Mount Screw

11. Accessory Mounting Arm

12. Mounting Arm Screw

13. Plunge Lock

14. Dust Extraction port

15. Dust Extractor Screw

16. Plunge Base Lock

17. Baseplate

18. Clear View Window

19. Turrent

20. Spindle Lock

21. Depth Adjustor Lock Button

22. Height Marker

This tool is compatible with all batteries & chargers from the Ozito PXC range.

For optimal performance, we recommend the use of a 3.0Ah battery or

higher to operate this PXC Trim Router.

BRUSHLESS PLUNGE ROUTER

BATTERY & CHARGER

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

Installing A Router Bit

When using the plunge router, only use router bits that:

• are suitable for cutting wood or plastic,

• has a suitable shank diameter for the collet mounted (collet size:

6.35mm & 8mm),

• has a maximum diameter of 28mm,

• are suitable for the router’s speed (n0 = 10,000-30,000/min).

1. Remove the plunge router base from the

router unit.

2. Place the smaller supplied spanner on

the spindle and use the large spanner to

loosen the collet nut.

Note: If a different collet size is required,

remove the collet nut entirely and replace

the collet. Re-attach the collet nut but don’t

tighten it all the way.

3. Fully insert the shaft of the router bit (not

supplied) into the collet.

4. Press and hold down the spindle lock

while tightening the collet nut with your

ngers.

5. Release the spindle lock and then use the

2 spanners to fully tighten the collet nut.

WARNING! THE SPINDLE LOCK IS NOT ALLOWED

TO BE USED FOR TIGHTENING WITH THE SPANNER.

TIGHTEN THE CLAMP NUT USING THE TWO

SPANNERS.

mm 00 in.

1/2

mm 00 in.

1/2

mm 00 in.

1/2

mm 00 in.

1/2

3 41

1112 10

WARNING! ENSURE THE TOOL IS SWITCHED

OFF AND THE BATTERY IS REMOVED BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

WARNING! WEAR GLOVES WHEN HANDLING

ROUTER BITS AS THEY CAN BE SHARP AND/OR

HOT TO THE TOUCH AFTER USE.

WARNING! ONLY USE THE ROUTER UNIT WITH A

COMPATIBLE BASE. USING IT WITHOUT A BASE

OR WITH AN INCOMPATIBLE BASE MAY RESULT IN

SERIOUS INJURY.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Ikke kategoriseret
Model:	PXBPRS-018

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXBPRS-018 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Ozito Manualer

Ozito PXLMB-335 Manual

19 August 2025

Ozito PXCG-080 Manual

29 Juli 2025

Ozito PXGAR-500 Manual

29 Juli 2025

Ozito PXSK-2518 Manual

22 Juni 2025

Ozito PXBPS-1828 Manual

2 Juni 2025

Ozito PXLEK-1840 Manual

5 Januar 2025

Ozito PXBGSS-1815 Manual

10 December 2024

Ozito PXBSPS-180 Manual

6 Oktober 2024

Ozito SSH-240 Manual

6 Oktober 2024

Ozito DMC-1000 Manual

20 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kenwood Elegancy ZJP11 Manual

4 Oktober 2025

Fisher & Paykel VB30SPEX3 Manual

4 Oktober 2025

Falmec Level One Manual

4 Oktober 2025

StarTech.com TBLT3MM2M Manual

3 Oktober 2025

Fisher & Paykel VB30SDEI3 Manual

3 Oktober 2025

Fisher & Paykel WB76SPEX3 Manual

3 Oktober 2025

Realme Q5 Manual

3 Oktober 2025

Lumantek ez-Pro VS4 Manual

3 Oktober 2025

Fisher & Paykel EB76PSX3 Manual

3 Oktober 2025

Inkbird ISC-027BW Manual

3 Oktober 2025