Ozito PXCCSSS-018 Manual

Ozito Ikke kategoriseret PXCCSSS-018

Læs gratis den danske manual til Ozito PXCCSSS-018 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Ozito PXCCSSS-018, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

CORDLESS

CHAINSAW

SHARPENER

INSTRUCTION MANUAL

PXCCSSS-018

WHAT’S IN THE BOX

WARRANTY

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

ozito.com.au

0516

SPECIFICATIONS

Input: 18V

No load speed: 6,500/min

Table/vice angles: 0 – 35° left & right

Sharpening Wheel: Ø108 x 3.2mm

Bore: Ø23mm

Suits chain pitch: 0.325” and 3/8”

Weight: 1.7kg

Chainsaw Chain Sharpener

Sharpening Wheel (assembled)

Table & Lock Knob

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other

than that specied on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty Warranty excludes consumable parts, for example: Sharpening wheel

and included accessories.

Battery & Charger

sold separately

ONLINE MANUAL

Scan this QR Code with your mobile

device to take you to the online manual.

Assembling the table

1. Insert the bolt of the table through

the hole in the base.

2. Secure the table in place by xing the

locking knob to the bolt (by screwing the

knob clockwise).

Mounting the sharpener

For safe operation of the sharpener, the base of the tool must be tted to a at, solid,

secure surface such as a work bench.

The sharpener base is designed in two halves. The rear half is for tting at to a stable

surface and the front is designed to protrude over the edge of the mounting surface.

The sharpener base should be

tted to the mounting surface by

sliding the rear half back until the

two ‘steps’ on the base align with

the edge of the mounting surface.

Ensure when mounting, that the

table locking knob is still easily

accessible for when adjusting the

table angles.

Two 6mm mounting holes allow for xing the

base to the mounting surface (bolts not supplied).

Ensure the mounting surface is capable of

supporting the weight of the sharpener and chain

to be sharpened.

The tool can also be clamped to mounting surface

with a G-clamp or similar.

1. Lowering hand piece

2. Sharpening wheel cover

3. Direction of rotation indicator

4. LED

5. Sharpening wheel

6. Depth of grind knob

7. Depth of grind locking knob

8. Depth of grind pin

9. Guide clamp lever

10. Chain (tooth) stop

11. Guide

12 Depth stop platform

13. Table locking knob

14 Bench mounting holes

15. Sharpener base

16. Chain stop adjusting

locking knob

17. Adjustable table

18. Chain stop adjusting knob

19. Table scale

CHAINSAW CHAIN SHARPENER

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

9 10 11

14 15

CAUTION: ENSURE THAT THE TOOL IS OFF AND THE

BATTERY REMOVED BEFORE PERFORMING ANY OF THE

FOLLOWING OPERATIONS.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Ikke kategoriseret
Model:	PXCCSSS-018

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXCCSSS-018 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Ozito Manualer

Ozito PXCG-080 Manual

29 Juli 2025

Ozito PXGAR-500 Manual

29 Juli 2025

Ozito PXSK-2518 Manual

22 Juni 2025

Ozito PXBPS-1828 Manual

2 Juni 2025

Ozito PXLEK-1840 Manual

5 Januar 2025

Ozito PXBGSS-1815 Manual

10 December 2024

Ozito PXBSPS-180 Manual

6 Oktober 2024

Ozito SSH-240 Manual

6 Oktober 2024

Ozito DMC-1000 Manual

20 September 2024

Ozito PXBCSS-184 Manual

15 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kenmore SM2050 Manual

17 August 2025

Vulcan VBB1CF Manual

17 August 2025

MSW -WPD-PVDC4/2 Manual

17 August 2025

Kenmore DU1275 Manual

17 August 2025

YA-MAN Bloom 5 Manual

17 August 2025

OSD Audio NERO-CONTROL12 Manual

17 August 2025

Singercon SIN-ALD-2000 Manual

17 August 2025

Vulcan VIB2 Manual

17 August 2025

Mars Gaming MNBC5 Manual

17 August 2025

Mars Gaming MNBC6 Manual

17 August 2025