Ozito PXCLTS-0182 Manual

Ozito Ikke kategoriseret PXCLTS-0182

Læs gratis den danske manual til Ozito PXCLTS-0182 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 73 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 37 anmeldelser. Har du et spørgsmål om Ozito PXCLTS-0182, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
CORDLESS
LINE TRIMMER
PXCLTS-0182
STANDARD EQUIPMENT
Line Trimmer
Safety Guard
Adjustable Handle
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V x 2
No Load Speed: 0 - 9,000/min
Cutting Diameter: 300mm
Cutting Line: Ø2.0mm x 8m
Line Feed: Bump
Weight: 3.1kg
ozito.com.au
0618
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
Shoulder Strap, Hex Key and
Replacement Spool & Line
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: line & spool,
shoulder strap and included accessories.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
2. Align the tabs of the safety guard
with the recess in the back of the
line trimmer motor.
3. Slide the safety guard in place and
secure with the socket head bolt.
Tighten with the hex key.
Fitting the Safety Guard
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND BATTERY DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! NEVER USE THE GRASS TRIMMER
UNLESS THE SAFETY GUARD IS PROPERLY FITTED.
CORDLESS LINE TRIMMER
1. Safety Switch
2. Variable Speed Trigger
3. Battery Seating
4. Adjustable Handle
5. Shoulder Strap Bracket
6. Adjustable Handle Lever
7. Adjustable Handle Knob
8. Shaft Lock Collar
9. Edging Guide
10. Cutting Line
11. Safety Guard
RECESS
Fitting the Adjustable Handle
1. Fit the adjustable handle onto the
mounting bracket.
Note: You will need to carefully ex
the adjustable handle just enough to
slip over the mounting bracket. Do not
over ex as this can damage or break
the adjustable handle.
2. Place the adjustable handle on
the mounting bracket, then pass
the screw with washer through
the handle and onto the mounting
bracket.
1 2 3 4
10 11
5
7
8
9
6
ACCESSORIES
12. Hex Key
13. Replacement Spool & Line
14. Shoulder Strap
12
BATTERY & CHARGER
This tool is compatible with all battery and chargers from
the Ozito Power X Change Range
13 14
1. With the provided hex key remove the socket head bolt from the safety
guard.

Produkt Specifikationer

Mærke: Ozito
Kategori: Ikke kategoriseret
Model: PXCLTS-0182

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXCLTS-0182 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Ozito Manualer

Ozito

Ozito PXLMB-335 Manual

19 August 2025
Ozito

Ozito PXCG-080 Manual

29 Juli 2025
Ozito

Ozito PXGAR-500 Manual

29 Juli 2025
Ozito

Ozito PXSK-2518 Manual

22 Juni 2025
Ozito

Ozito PXBPS-1828 Manual

2 Juni 2025
Ozito

Ozito PXLEK-1840 Manual

5 Januar 2025
Ozito

Ozito PXBGSS-1815 Manual

10 December 2024
Ozito

Ozito PXBSPS-180 Manual

6 Oktober 2024
Ozito

Ozito SSH-240 Manual

6 Oktober 2024
Ozito

Ozito DMC-1000 Manual

20 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sony

Sony AC-82MD Manual

3 Oktober 2025
Vivax

Vivax EMS-EM-3P-10K01 Manual

3 Oktober 2025
Realme

Realme GT5 Pro Manual

3 Oktober 2025
Structural Concepts

Structural Concepts Reveal NE4835HSV Manual

3 Oktober 2025
Supermicro

Supermicro SuperStorage SSG-136R-N32JBF Manual

3 Oktober 2025
Vivax

Vivax EMS-BM-LV-5K01 Manual

3 Oktober 2025
Sony

Sony DWA-F03D Manual

3 Oktober 2025
Sony

Sony SF-E64A Manual

3 Oktober 2025
EasyMaxx

EasyMaxx 13584 Manual

3 Oktober 2025
Sony

Sony CCMC-EA05 Manual

3 Oktober 2025