Ozito PXCMFTS-018 Manual

Ozito Ikke kategoriseret PXCMFTS-018

Læs gratis den danske manual til Ozito PXCMFTS-018 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Ozito PXCMFTS-018, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

SPECIFICATIONS

Voltage: 18V

No Load Speed: 11,000-20,000/min

Oscillating Angle: 3.2°

Sanding Pad Size: 90 x 90 x 90mm

Sandpaper Size: 93 x 93 x 93mm

Accessory Compatibility: Starlock & Universal

Weight: 0.99kg

COMPACT MULTI

FUNCTION TOOL

INSTRUCTION MANUAL

ozito.com.au

STANDARD EQUIPMENT

Multi Function Tool

8 x Accessories

PXCMFTS-018

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

1018

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts, for example: cutting blades.

WOOD METAL

1. FITTING THE BATTERY

Inserting & Removing the Battery

1 Slide the battery into the seating

at the back of the tool until it

clicks into place.

2 To remove, press and

hold the battery release

tab and then slide out.

KNOW YOUR PRODUCT SETUP & PREPARATION

COMPACT MULTI FUNCTION TOOL

ACCESSORIES

1 2 3

7 8 9 10 11 12

1 On/Off Switch

2 Variable Speed Dial

3 Battery Seating

4 Sure Grip Handle

5 Accessory Drive Spindle

6 Accessory Locking Bolt & Washer

7 Sanding Pad

8 Sanding Paper

(60grit, 80grit, 120grit)

9 Wood Plunge Blade

10 Metal Plunge Blade

11 Scraper

12 Hex Key

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to the

online manual.

BATTERY & CHARGER

This tool is compatible with all batteries and chargers from the Ozito

Power X Change Range.

Battery protection system

The tool is equipped with the battery protection system, which helps to ensure a long service

life.

The output power automatically cuts off during operation when the tool and/or battery are

placed under the following situations:

• When the tool is overloaded:

If this occurs, release the trigger switch and remove causes of overload, then pull the

switch trigger again to restart.

• When the remaining battery capacity becomes low:

Recharge the battery pack.

Note: The battery protection system does not in any way damage the tool.

Note: The indicated capacity may be lower than the actual level during use or immediately

after using the tool.

To absorb the vibrations which arise

on the rechargeable battery, there

is some play between the battery

and the tool’s battery seating. This

is normal and has no effect on the

performance of the equipment or the

rechargeable battery

Vibration Absorption

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Ikke kategoriseret
Model:	PXCMFTS-018

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXCMFTS-018 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Ozito Manualer

Ozito PXLMB-335 Manual

19 August 2025

Ozito PXCG-080 Manual

29 Juli 2025

Ozito PXGAR-500 Manual

29 Juli 2025

Ozito PXSK-2518 Manual

22 Juni 2025

Ozito PXBPS-1828 Manual

2 Juni 2025

Ozito PXLEK-1840 Manual

5 Januar 2025

Ozito PXBGSS-1815 Manual

10 December 2024

Ozito PXBSPS-180 Manual

6 Oktober 2024

Ozito SSH-240 Manual

6 Oktober 2024

Ozito DMC-1000 Manual

20 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Supermicro SuperStorage 6039P-E1CR16L Manual

3 Oktober 2025

Sony MRW-G3 Manual

3 Oktober 2025

GYS DIAG-BATIUM 100.12 FV Manual

3 Oktober 2025

Sony INZONE KBD-H75 Manual

3 Oktober 2025

3 Oktober 2025

3 Oktober 2025

3 Oktober 2025

2 Oktober 2025

Supermicro SuperStorage 6029P-E1CR12L Manual

2 Oktober 2025

Sony BKM-FW12 Manual

2 Oktober 2025