Ozito PXCPPS-018U Manual

Ozito Ikke kategoriseret PXCPPS-018U

Læs gratis den danske manual til Ozito PXCPPS-018U (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 80 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 40.5 anmeldelser. Har du et spørgsmål om Ozito PXCPPS-018U, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

1016

CORDLESS

POLE PRUNER

SAFETY WARNINGS

Page 2

Information about the battery

1. The battery pack supplied with your cordless tool is not charged. The battery

pack has to be charged before you use the tool for the  rst time.

2. For optimum battery performance avoid low discharge cycles. Charge the

battery pack frequently.

3. Store the battery pack in a cool place, ideally at 15°C and charged to at least

40%.

4. Lithium-ion batteries are subject to a natural ageing process. The battery

pack must be replaced at the latest when its capacity falls to just 80% of its

capacity when new. Weakened cells in an aged battery pack are no longer

capable of meeting the high power requirements and therefore pose a safety

risk.

5. Do not throw battery packs into an open  re. There is a risk of explosion!

6. Do not ignite the battery pack or expose it to re.

7. Donotexhaustivelydischargebatteries. Exhaustive discharge will

damage the battery cells. The most common cause of exhaustive discharge

is lengthy storage or non-use of partly discharged batteries. Stop working

as soon as the performance of the battery falls noticeably or the electronic

protection system triggers. Place the battery pack in storage only after it has

been fully charged.

8. Protectbatteriesandthetoolfromoverloads. Overloads will quickly

result in overheating and cell damage inside the battery housing without this

overheating actually being apparent externally.

9. Avoiddamageandshocks. Replace batteries which have been dropped

from a height of more than one meter or which have been exposed to violent

shocks without delay, even if the housing of the battery pack appears to be

undamaged. The battery cells inside the battery may have suff ered serious

damage. In this respect, please also read the waste disposal information.

10. If the battery pack suff ers overloading and overheating, the integrated

protective cut-off will switch off the equipment for safety reasons. Important.

Do not press the ON/OFF switch any more if the protective cut-off has

actuated. This may damage the battery pack.

11. Use only original battery packs. The use of other batteries may result in

injuries, explosion and a re risk.

Information on chargers and the charging process

1. Please check the data marked on the rating plate of the battery charger.

Be sure to connect the battery charger to a power supply with the voltage

marked on the rating plate. Never connect it to a diff erent mains voltage.

2. Protect the battery charger and its cable from damage and sharp edges.

Have damaged cables repaired without delay by a quali ed electrician.

3. Keep the battery charger, batteries and the cordless tool out of children’s

reach.

4. Do not use damaged battery chargers.

5. Do not use the supplied battery charger to charge other cordless tools.

6. In heavy use the battery pack will become warm. Allow the battery pack to

cool to room temperature before commencing with the charging.

7. Donotover-chargebatteries. Do not exceed the maximum charging times.

These charging times only apply to discharged batteries. Frequent insertion

of a charged or partly charged battery pack will result in over-charging and

cell damage. Do not leave batteries in the charger for days on end.

8. Neveruseorchargebatteriesifyoususpectthatthelasttimetheywere

chargedwasmorethan12monthspreviously.There is a high probability

that the battery pack has already suffered dangerous damage (exhaustive

discharge).

9. Charging batteries at a temperature below 10°C will cause chemical damage

to the cell and may cause a re.

10. Do not use batteries which have heated during the charging process, as the

battery cells may have suff ered dangerous damage.

11. Do not use batteries which have suff ered curvature or deformation during

the charging process or which show other non-typical symptoms (gassing,

hissing, cracking,…)

12. Never fully discharge the battery pack (recommended depth of discharge max.

80%) A complete discharge of the battery pack will lead to premature ageing

of the battery cells.

13. Never charge the batteries unsupervised.

Protection from environmental inﬂuences

1. Wear suitable work clothes. Wear safety goggles.

2. Protectyourcordlesstoolandthebatterychargerfrommoistureand

rain. Moisture and rain can cause dangerous cell damage.

3. Do not use the cordless tool or the battery charger near vapors and

inammable liquids.

4. Use the battery charger and cordless tools only in dry conditions and an

ambient tempe- rature of 10-40°C.

5. Do not keep the battery charger in places where the temperature is liable to

reach over 40°C. In particular, do not leave the battery charger in a car that is

parked in the sunshine.

6. Protectbatteriesfromoverheating.Over- loads, over-charging and

exposure to direct sunlight will result in overheating and cell damage. Never

charge or work with batteries which have been overheated – replace them

immediately if possible.

7. Storageofbatteries,batterychargersandcordlesstools. Store the

charger and your cordless tool only in dry places with an ambient temperature

of 10-40°C. Store your lithium-ion battery pack in a cool, dry place at a

temperature of 10-20°C. Protect them from humidity and direct sunlight. Only

place fully charged batteries in storage (charged at least 40%).

8. Prevent the lithium-ion battery pack from free- zing. Battery packs which were

stored below 0°C for more than 60 minutes must be dispo- sed of.

9. When handling batteries beware of electro- static charge: Electrostatic

discharges cause damage of the electronic protection system and the battery

cells. Avoid electrostatic char- ging and never touch the battery poles.

Rechargeable batteries and cordless electricmachines and tools contain materials

that are potentiallyharmful to the environment. Never placeany cordless electric

machines or tools in your household refuse. When cordless electric machines or

tools become defective or worn, remove the rechargeable batteries and return

them to iSC GmbH (address: Eschenstrasse 6, D-94405, Germany). If the

rechargeable batteries cannot be removed, return the complete cordless machine

or tool.

You can then be sure that the equipment will be correctly disposed of by the

manufacturer.

Whenshippingordisposingofbatteriesandcordlesstools,alwaysensure

thattheyarepackedindividuallyinplasticbagstopreventshortcircuits

andres.

Residualrisks

Even when the tool is used as prescribed it is not possible to eliminate all

residual risk factors. The following hazards may arise in connection with the tool’s

construction and design:

1. Damage to lungs if an effective dust mask is not worn.

2. Damage to hearing if effective hearing protection is not worn.

3. Health defects resulting from vibration emission if the appliance is being

used over longer period of time or not adequately managed and properly

maintained.

WARNING! This machine produces an electromagnetic eld during operation.

This eld may under some circumstances interfere with active or passive

medical implants. To reduce the risk of serious or fatal injury, we recommend

persons with medical implants to consult their physician and the medical

implant manufacturer before operating this machine.

Donotlosethesesafetyinstructions.

BATTERY AND CHARGER SAFETY WARNINGS

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Ikke kategoriseret
Model:	PXCPPS-018U

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXCPPS-018U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Ozito Manualer

Ozito PXLMB-335 Manual

19 August 2025

Ozito PXCG-080 Manual

29 Juli 2025

Ozito PXGAR-500 Manual

29 Juli 2025

Ozito PXSK-2518 Manual

22 Juni 2025

Ozito PXBPS-1828 Manual

2 Juni 2025

Ozito PXLEK-1840 Manual

5 Januar 2025

Ozito PXBGSS-1815 Manual

10 December 2024

Ozito PXBSPS-180 Manual

6 Oktober 2024

Ozito SSH-240 Manual

6 Oktober 2024

Ozito DMC-1000 Manual

20 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Falmec Brooklyn Manual

4 Oktober 2025

Tempo 915CL Manual

4 Oktober 2025

StarTech.com F35023-USB-EXTENDER Manual

4 Oktober 2025

EasyMaxx 04670 Manual

4 Oktober 2025

LC-Power Arkangel 3 LC8850III V2.3 Manual

4 Oktober 2025

Falmec Brera 75 Manual

4 Oktober 2025

Kenwood Mesmerine TFM810 Manual

4 Oktober 2025

AFK EWK-2200.7C Manual

4 Oktober 2025

Realme Narzo 60x Manual

4 Oktober 2025

AFK RC-22.16 Manual

4 Oktober 2025