Ozito PXPPS-1820 Manual

Ozito Ikke kategoriseret PXPPS-1820

Læs gratis den danske manual til Ozito PXPPS-1820 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Ozito PXPPS-1820, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

CORDLESS

POLE PRUNER

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 18V

Bar Length: 200mm

Chain Speed: 5.5m/s

Oil Tank: 70ml

Chain Pitch: 9.53mm (3/8”)

Extension Pole: 830mm

Length Min/Max.: 2.07/2.90m

Weight: 3.0kg

PXPPS-1820

STANDARD EQUIPMENT

Pruner Head

ozito.com.au

Extension Tube

WARRANTY

0323

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty. Warranty excludes consumable parts, for example: bearings, bar,

chain, blade cover.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria 3175, Australia.

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

Bar & Chain

Rear Handle Tube

Shoulder Strap, Bar &

Chain Cover

Multi-Tool

ONLINE MANUAL

Scan this QR Code with your mobile

device to take you to the online manual.

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

WARNING! ENSURE THE MACHINE IS SWITCHED OFF

AND BATTERY IS DISCONNECTED BEFORE PERFORMING

ANY OF THE FOLLOWING TASKS.

ACCESSORIES

Cutter

1. Chain

2. Guide Bar

3. Pruner Head

4. Lock Nut

5. Extension Tube

6. Top Handle

7. Shoulder Strap Retainer

8. Sure Grip Handle

9. Oil Tank Cap

10. Chain Sprocket Cover

11. Cover Bolt

12. Safety Switch

13. Battery Seating

14. On/Off Trigger

15. Chain & Bar Cover

16. Shoulder Strap

17. Multi-Tool

CORDLESS POLE PRUNER

WARNING! THE CHAIN HAS SHARP EDGES, FOR YOUR

OWN SAFETY, PLEASE USE WORK GLOVES. NEVER

TOUCH THE CHAIN OR SERVICE THE UNIT WITH

BATTERY CFITTED.

BATTERY & CHARGER

This tool is compatible with all battery and

chargers from the Ozito PXC Range.

1716

Fitting the Guide Bar & Chain

1. Loosen the cover bolt with the supplied Multi-Tool and remove chain

sprocket cover together with the cover bolt.

9 1110

Cutter

2. Place the chain in the groove of the guide bar as shown. Refer to the

image printed on the guide bar that indicates the direction that the

chain should face.

WARNING! IF THE CHAIN IS INSTALLED BACKWARDS

(CHAIN CUTTERS FACING IN THE OPPOSITE DIRECTION

OF ROTATION) THE POLE PRUNER WILL VIBRATE

EXCESSIVELY AND NOT CUT.

3. Place the guide bar and

chain in position, ensuring

that the chain is around

sprocket (A). Also ensure

that the pin (B) ts into the

central slot in the guide bar.

4. Pull the guide bar forward

until the chain is closely

seated. Make sure that all

the drive links are in the

groove of the bar.

5. Reattach the chain sprocket

cover and nger-tighten

the cover bolt. Only tighten

the cover bolt securely

once the chain tension

has been adjusted. (see

Tensioning the Chain).

Cutter

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Ikke kategoriseret
Model:	PXPPS-1820

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXPPS-1820 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Ozito Manualer

Ozito PXLMB-335 Manual

19 August 2025

Ozito PXCG-080 Manual

29 Juli 2025

Ozito PXGAR-500 Manual

29 Juli 2025

Ozito PXSK-2518 Manual

22 Juni 2025

Ozito PXBPS-1828 Manual

2 Juni 2025

Ozito PXLEK-1840 Manual

5 Januar 2025

Ozito PXBGSS-1815 Manual

10 December 2024

Ozito PXBSPS-180 Manual

6 Oktober 2024

Ozito SSH-240 Manual

6 Oktober 2024

Ozito DMC-1000 Manual

20 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sony AIBO ERS-7M2 Manual

3 Oktober 2025

AFK EWK-2200.73C Manual

3 Oktober 2025

TOA TS-D1000-DU Manual

3 Oktober 2025

Zoom G1M Manual

3 Oktober 2025

Arris Touchstone TM902 Manual

3 Oktober 2025

Inkbird PTH-10C Manual

3 Oktober 2025

Rowenta Professional DW8115 Manual

3 Oktober 2025

AFK EWK-2200.5 Manual

3 Oktober 2025

Realme GT3 Manual

3 Oktober 2025

Supermicro SuperServer SYS-110D-4C-FRAN8TP Manual

3 Oktober 2025