Ozito PXRTS-018 Manual

Ozito Ikke kategoriseret PXRTS-018

Læs gratis den danske manual til Ozito PXRTS-018 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Ozito PXRTS-018, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

STANDARD EQUIPMENT

OFF

MIN

SPEED

MAX

OFF

MIN

SPEED

MAX

PXRTS-018

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 18V

No Load Speed: 5,000-33,000/min

Collet Size: 2.3 & 3.2mm

Weight: 3.74kg

ozito.com.au

1222

Cordless Rotary Tool Station

Flexible Shaft & Accessory

Case

40 x Sanding Discs, Screw

Mandrel, 5 x Diamond

Engravers, 2 x Drum Mandrels,

Wire Brush, 2 x Drill Bits

(2.3 & 3.2mm), Polishing

Compound, 4 x Felt Wheels,

Cone Mandrel, 8 x Sanding

Bands, 5 x Cut-Off Wheels, 5

x Stone Grinders, 2 x Collets

(2.3 & 3.2mm) & Spanner

ROTARY TOOL

STATION

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

OFF

MIN

SPEED

MAX

1. Flexible Shaft

2. Flexible Shaft Connector

3. Storage Case

4. Storage Slots

5. Speed Dial

6. Battery Seating

7. Power Switch

8. Collet Nut

9. Rotary Tool Handle

10. Handle Storage

11. Spindle Lock

This tool is compatible with all batteries & chargers from the Ozito PXC range.

CORDLESS ROTARY TOOL STATION

BATTERY & CHARGER

KNOW YOUR PRODUCT

1. FITTING ACCESSORIES

SETUP & PREPARATION

7 6

WARNING! ENSURE THE TOOL IS SWITCHED

OFF AND THE BATTERY IS REMOVED BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

Assembling the Flexible Shaft

1. Press the end of the exible shaft

connector rmly against the

square socket.

Note: Ensure the inner core

is ush with the socket before

tightening.

2. Screw the exible shaft connector onto the tool.

WARNING! ENSURE THAT THERE ARE NO KINKS

OR BENDS IN THE FLEXIBLE SHAFT BEFORE

OPERATION. OVER BENDING THE SHAFT CAN

GENERATE EXCESSIVE HEAT WHICH CAN DAMAGE

THE TOOL.

Attaching Accessories

1. Slide back and hold the spindle

lock.

2. Using the supplied wrench,

slightly loosen the collet nut.

3. Insert the shaft of the accessory

into the collet until only 2-3mm

of it is left out.

4. With the spindle lock engaged,

nger tighten the collet nut until

the accessory shank is rmly

gripped by the collet.

Note: Avoid excessive tightening of the collet nut when no accessory is

inserted, as this may cause the collet to get stuck in the collet nut. If this

happens, push the shank of an accessory into the hole of the collet nut.

HOLD

13CM

RADIUS

MAX.

ALLOWABLE

BEND

OFF

INNER

CORE

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Ikke kategoriseret
Model:	PXRTS-018

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXRTS-018 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Ozito Manualer

Ozito PXBPS-1828 Manual

2 Juni 2025

Ozito PXLEK-1840 Manual

5 Januar 2025

Ozito PXBGSS-1815 Manual

10 December 2024

Ozito PXBSPS-180 Manual

6 Oktober 2024

Ozito SSH-240 Manual

6 Oktober 2024

Ozito DMC-1000 Manual

20 September 2024

Ozito PXBCSS-184 Manual

15 September 2024

Ozito PXPPS-1820 Manual

1 September 2024

Ozito PXNGS-218 Manual

1 September 2024

Ozito PXHTBK-2518 Manual

1 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet Audio P100CPA Manual

15 Juni 2025

Sabrent BK-MAC2 Manual

15 Juni 2025

Planet Audio P9950CPA Manual

15 Juni 2025

Filmcity FC-CTH-01 Manual

15 Juni 2025

Cleveland 22CGT6 Manual

15 Juni 2025

Auray SVRK-4U-S Manual

15 Juni 2025

Bobrick B-2860 Manual

15 Juni 2025

Sony ODBK-103 Manual

15 Juni 2025

Planet Audio P70CPA Manual

15 Juni 2025

Gourmia GAF657 Manual

15 Juni 2025