Ozito PXSCS-018 Manual

Ozito Ikke kategoriseret PXSCS-018

Læs gratis den danske manual til Ozito PXSCS-018 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Ozito PXSCS-018, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

STANDARD EQUIPMENT

PXSCS-018

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 18V

No Load Speed: 2,800/min

Working Width: 280mm

Scarier Roller: 12 Blades

Depth Adjustment: -2/2/4/6mm

Noise Rating: 90dB

Weight: 6.7kg

ozito.com.au

0522

Brushless Scarier

Handle Parts

Handle Assembly Fasteners

BRUSHLESS

SCARIFIER

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

WARNING

The following actions will result in the warranty being

void.

• If the tool or machine has been operated on a supply voltage other than that

specied on the tool or machine.

• If the tool or machine shows signs of damage or defects caused by or

resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool or machine is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts, for example: cable clips, roller blade, bearings etc.

Cable Clip x 3, Safety Key

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

Fitting the Lower Handles

1. Insert the right side lower handle

to the opening on the right side

of the scarier housing. Make

sure that the embossing (A) faces

inwards.

2. Repeat the process with the left

lower handle.

3. Secure both lower handles in

place with a T-bolt.

1. Upper Handle

2. Start/Stop Lever

3. Safety Switch Button

4. Handle Securing Set x 4

5. Cable clip x 3

6. Carry Handle

7. Lower Handle - Right Side

8. Battery Cover

9. Mid Handle Piece x 2

10. Lower Handle - Left Side

11. T-Bolt x 2

12. Depth Adjustment Knob x 2

13. Safety Key

This machine is compatible with all batteries & chargers from the

Ozito Power X Change range.

BRUSHLESS SCARIFIER

BATTERY & CHARGER

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

7 109 4 115 13

WARNING! ENSURE THE MACHINE IS SWITCHED

OFF AND THE BATTERY IS REMOVED BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

Fitting the Mid Handle to the Lower Handles

1. Using a bolt and T-nut from the handle securing set, secure each mid

handle piece to the inside ends of the lower handle. Ensure the bolts t

through the outside of the lower handles and then through the hole in the

mid handle.

Fitting the Upper Handle to the Mid Handles

1. Place the upper handle over each

side of the mid handles. From the

handle securing set, t the bolts

through the outer side of the

upper handle and then through

the hole in the mid handles.

Note: When you t the upper

handle you can decide the height

of the handle by selecting the

appropriate fastening hole. Ensure

you use the same hole on both

sides.

2. Secure in place by screwing the

T-nut over the protruding ends of

the bolts.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Ikke kategoriseret
Model:	PXSCS-018

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito PXSCS-018 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Ozito Manualer

Ozito PXCG-080 Manual

29 Juli 2025

Ozito PXGAR-500 Manual

29 Juli 2025

Ozito PXSK-2518 Manual

22 Juni 2025

Ozito PXBPS-1828 Manual

2 Juni 2025

Ozito PXLEK-1840 Manual

5 Januar 2025

Ozito PXBGSS-1815 Manual

10 December 2024

Ozito PXBSPS-180 Manual

6 Oktober 2024

Ozito SSH-240 Manual

6 Oktober 2024

Ozito DMC-1000 Manual

20 September 2024

Ozito PXBCSS-184 Manual

15 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kenmore SM2050 Manual

17 August 2025

Vulcan VBB1CF Manual

17 August 2025

MSW -WPD-PVDC4/2 Manual

17 August 2025

Kenmore DU1275 Manual

17 August 2025

YA-MAN Bloom 5 Manual

17 August 2025

OSD Audio NERO-CONTROL12 Manual

17 August 2025

Singercon SIN-ALD-2000 Manual

17 August 2025

Vulcan VIB2 Manual

17 August 2025

Mars Gaming MNBC5 Manual

17 August 2025

Mars Gaming MNBC6 Manual

17 August 2025