Peavey 15 Low Rider Manual

Peavey Højttaler 15 Low Rider

Læs gratis den danske manual til Peavey 15 Low Rider (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Peavey 15 Low Rider, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

P E A V E Y E L E C T R O N I C S

Peavey Low Rider® 18

00560600

Peavey Low Rider® 15

00560310

The Low Rider driver series

represents a milestone in high-

powered sub-woofer design. An

incredible 1,600 Watt program

rating and extra-long cone

excursion provide maximum

amounts of amazingly clean, deep

bass.

The Low Rider is a superior choice

for the bottom end of any high-

powered sound system, from DJ

rigs to the largest professional

touring shows.

DESIGN

The Low Rider utilizes a

variation on the existing Kevlar®-

impregnated cones used on all

Black Widow® speakers. The cone

is stronger and tougher and uses

an innovative asymmetrical -M

surround for superior excursion

and motion control.

High quality spring terminals

accepting large gauge wire are

attached to large diameter high-

current tinsel leads with silver

solder to withstand high currents,

high temperatures and long

excursion.

The massive new voice coil uses

polyimide-insulated copper ribbon

wire, edge-wound and bonded

onto an incredibly durable and

heat-resistant polyimide composite

former. The coil’s winding length of

1.150” is an amazing 80% longer

than Peavey’s standard Black

Widow coil. The long coil has a

large surface area to dissipate

heat, and its increased length

drives the cone to a far higher

excursion. The coil is over coated

with a tough thermoset epoxy

for added durability, abrasion

resistance and heat dissipation.

The coil wires are solderless

diffusion welded to high-

conductivity OFHC copper ribbon

leads, which are embedded

inside the former assembly and

soldered to the tinsel leads with

high temperature silver solder.

The solder joint is then coated with

a special, thermally conductive

silicone adhesive for encapsulation

and heat dissipation.

The voice coil assembly is bonded

to the Kevlar cone and new,

incredibly tough plastiseal-coated

Nomex® progressive-roll spider

using a thermoset epoxy originally

developed for attaching nose

cones onto ICBM missiles — truly

an aerospace grade adhesive. The

spider and surround are bonded to

the frame with a strong, toughened

cyanoacrylate adhesive, which is

also used to bond the dust cap to

the cone.

The magnet structure is all new

and was designed using extensive

Finite Element computer modeling.

The back plate/pole piece is cold

forged from a single massive billet

of ultra low carbon steel, included

Peavey’s patented Focused Field

Geometry and is undercut to allow

greater coil travel. The pole is

extended beyond the front plate to

improve coil cooling and make it

more magnetically linear and the

front plate is 10mm thick to match

the long voice coil and provide a

better path for heat and magnetic

energy. The result is 50% more

total magnetic gap energy than

can be found in the standard Black

Widow Super Structure magnet

assembly.

A patent pending vent plate greatly

improves voice coil cooling. This

heat conductive, ported and nned

aluminum ring delivers cool air

pumped by the spider directly to

the voice coil to keep operating

temperatures under control. The

improved cooling increases power

handling and reliability and reduce

power compression.

The cast aluminum frame is tough

and rigid and has the strength

needed to hold the cone and

huge magnet assembly in perfect

alignment. The deep dish design

and large spider clearance make

high excursion and high output

possible.

These dynamic new drivers

also utilize the user friendly

Black Widow replaceable basket

assemblies with Rubatex® gaskets.

The result of these specially

designed components are truly

amazing loudspeakers. The Low

Rider’s astonishing low frequency

output is due to its high power

handling capability and its 1.4” of

available cone movement. These

speakers can also be used with

small enclosures, adding a new

dimension to compact, high output

sound reinforcement systems.

APPLICATIONS

The Low Rider® is specically

designed for sub woofer use, with

extremely high output capabilities

and massive power handling.

While most sub woofer applications

are below 150 Hz, it is usable to

frequencies as high as 500 Hz.

The compact enclosure

designs are ideal for instrument

amplication and high portability

applications such as DJ and small

touring bands. They provide solid

bass performance in extraordinarily

small enclosures. Band pass

enclosures also t into this range

as standalone sub woofers.

The medium sized enclosures

are still smaller than usual and

have more bass extension and

much higher output capabilities

than conventional designs. They

are excellent choices for high

performance sound reinforcement.

These designs are the best

combination of size and bass

performance.

For permanent installations and

applications requiring extremely

deep bass performance, the large

vented enclosures are ideal.

The low frequency extension

and high sound pressure levels

these systems can produce

is astounding. As is typical in

large, vented systems with low

vent tuning, power handling is

reduced by at least 15% due to the

increased cone excursion.

Due to the Low Rider’s high

output capabilities, excessive level

may cause structural damage to

buildings or induce permanent

hearing loss, nausea, vertigo or

intestinal disturbances in listeners.

Please be cautious when setting

maximum sound pressure levels.

ENCLOSURES

To assist with the growing interest

in home built enclosure designs,

Peavey includes complete

parameter data on these drivers

and also provides the user with

several recommended enclosure

designs. This information and

much more can be found at www.

peavey.com.

The 18” Low Rider driver performs

best with vented enclosure

between 5 and 9 cubic feet (142 to

255 liters) and vent tunings from

30 to 45 Hz. The Low Rider 18

is optimized for vented systems

but will also work with appropriate

single reex bandpass enclosures.

Sealed, innite bafe, horn,

transmission line and dual reex

bandpass enclosures are not

recommended.

The Low Rider 15” driver works

best in vented enclosures between

2 and 5 cubic feet (56.6 to 141.6

liters) and vent tunings from 34

to 45 Hz. It can also be used in

certain single reex bandpass

designs. As with the Low Rider

18, sealed, innite bafe, horn,

transmission line and dual reex

bandpass enclosures are not

recommended.

Active ltering must be included

with ampliers greater than 750

watts. This lter should be a

high pass 24dB Butterworth at a

minimum of 25 Hz for the 18” and

32 Hz for the 15”. Filtering is also

recommended below 750 watts

in order to conserve amplier

power and reduce excessive cone

motion. Failure to use ltering with

high power operation may cause

driver damage that can void your

warranty.

Strength of the completed

enclosure has a great effect on the

bass performance of the nished

system. Internal bracing is required

Produkt Specifikationer

Mærke:	Peavey
Kategori:	Højttaler
Model:	15 Low Rider

Har du brug for hjælp?

Hvis du har brug for hjælp til Peavey 15 Low Rider stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Peavey Manualer

Peavey PVXp 15 DSP Manual

15 November 2024

Peavey Messenger M100 Manual

12 November 2024

Peavey RBN 215 Manual

18 September 2024

Peavey PVs 18 Manual

15 September 2024

Peavey SP 218P Manual

14 September 2024

Peavey S-12825 RB Manual

31 August 2024

Peavey SSE 10 Manual

22 August 2024

Peavey RBN 118 Manual

16 August 2024

Peavey PHR 860S Manual

14 August 2024

Peavey ISM 5Tx Manual

11 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

JLab Epic Party Manual

31 Juli 2025

JVC XS-E423 Manual

30 Juli 2025

SoundTube RF31-EZ-T Manual

30 Juli 2025

Valcom VIP-480AL-W-SA Manual

30 Juli 2025

Rockustics StoneHenge II-S/T Manual

30 Juli 2025

Valcom InformaCast VIP-428A-IC Manual

30 Juli 2025

Valcom InformaCast VIP-431A-IC Manual

30 Juli 2025

Electro-Voice Evid 4.2T Manual

30 Juli 2025

Audiocase S10 Manual

30 Juli 2025

JLab JBuds Party Manual

30 Juli 2025