Peavey AQ 15 Manual
Læs nedenfor 📖 manual på dansk for Peavey AQ 15 (20 sider) i kategorien Højttaler. Denne guide var nyttig for 39 personer og blev bedømt med 4.7 stjerner i gennemsnit af 20 brugere
Side 1/20
www.peavey.com
AQ 15
Enclosure
Operating
Manual
FCC CAUTION:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm-
ful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment,
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The equipment should be installed and operated with minimum distance 5cm between the radiator and
your body.
IC WARNING:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the fol-
lowing two conditions: (1) this device may not cause interference, and (2) this device must accept any inter-
ference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
the device is compliance with RF exposure guidelines, and the equipment should be installed and operated
with minimum distance 5cm between the radiator and your body.
l’appareil est conforme aux directives d’exposition RF, et l’équipement doit être installé et exploité avec une
distance minimale de 5 cm entre le radiateur et votre corps.
ENGLISH
ank you for purchasing the Peavey® AQ™15 powered speaker system. e AQ™15 features a reliable bi-amped power
section that provides a total of 1000 Watts of peak available dynamic power with signal compression to prevent audible
overload. e analog power ampliers and linear power supply are coupled with a DSP based crossover and EQ.
e EQ presets are accessed via a one-knob selector switch. e AQ™15 provides a balanced input via a combination jack
that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. ere is a balanced ru output via a Male
XLR. ere is an adjustable Level control as well as an LED indicator that lights when the “so-limiting” compression
circuit is activated.
Features
* Two-way bi-amplied analog amp powered speaker system
* 15” heavy-duty woofer
* DX™14 compression driver, with 1.4 inch titanium diaphragm
* 670 watts peak dynamic woofer power, 330 watts peak dynamic tweeter power
* Bluetooth® streaming and pairing are supported
* DSP processing is 56 bit double-precision
* DSP I/O is at 48 kHz and 24 bits, with low-jitter, professional grade components
* Dynamic bass boost function
* Fan cooled for maximum reliability
* Peavey® Designed Quadratic roat Waveguide™ technology, 110 by 80 degree coverage
* Input is via a combo female XLR and 1/4” TRS phone jack with balanced input
OR a Bluetooth ® signal can be streamed to the speaker system.
* A Mic/Line switch to accommodate a wide range of input signals
* ru/Mix output is via a male XLR jack
* Multiple Factory Preset EQ settings for the DSP crossover system
* Rugged plastic injection-molded trapezoidal enclosure
* Cabinet has dual rear corner angled sides for oor monitor use.
* Full-coverage perforated steel grille, with powder coat nish
* Pole mount molded-in for 1 3/8” diameter poles
Applications
e Peavey AQ™15 has a variety of applications such as sound reinforcement, public address, side ll system, karaoke or
musical playback.
A typical signal source for the line-Gain inputs of the AQ™15 would be a sound reinforcement mixing console (mixer)
or the output from a CD player, MP3 player or tape deck. A dynamic microphone can be connected directly via the XLR
input and used when the Mic/Line switch in placed into the “Mic” position as well.
e AQ™15 is a two-way sound reinforcement system based on a heavy-duty 15” woofer and a DX™14 titanium diaphragm
dynamic compression driver mounted on a 110 by 80 degree coverage Quadratic roat Waveguide™. It’s contemporary
appearance coupled with exceptional performance oer a highly desirable combination.
e light yet durable injection-molded plastic enclosure with molded-in stand mount cup eases portable use for live music
or PA sound. e trapezoidal cabinet has three handles for ease of portability, and two extra angled sections on either side
to allow use as a oor monitor. A full length black powder coated perforated steel grille provides system protection and a
professional appearance.
e heavy-duty 15” woofer has a warm punchy sound for plenty of bass. e DX™14 compression driver tweeter is coupled
to a Quadratic roat™ constant directivity waveguide, an original Peavey® design, with smooth, even response, low distor-
tion and good high frequency dispersion.
Advanced Digital Signal Processing (A.D.S.P.) provides the crossover function, driver limiting, as well as the driver EQ to
enable the speaker system to provide an accurate and neutral sound for any type of music. e DSP processing uses 56 bit
double-precision to insure accurate and transparent sound processing, and the input/output sections use a 48 kHz sam-
pling rate at 24 bits for maximum delity. Low-jitter clocking and professional grade components insure the sound quality
is superb.
An extremely simple system of user selected Presets is implemented in the speaker system’s DSP computing core, and ac-
cessible via the rotary selector knob. A total of 6 presets is available, covering the most common applications for this genre
of speaker system.
e AQ™15 speaker system power ampliers providing the bi-amplication are low-distortion reliable fan-cooled units
providing a total of 1000W peak available dynamic power for the system.
ere is 670W peak available dynamic power for the woofer, and 330W peak available dynamic power for the tweeter. e
power supply for both amps is a switching type for low weight coupled with low cost. Both ampliers feature sophisticated
signal compression, which virtually eliminates audible power amplier clipping. Cooling is provided via a low-noise fan,
for reliable operation under any conditions.
A built-in dynamic bass boost function provides the maximum amount of bass in such a small package.
Input is via a combo female XLR and 1/4” TRS phone jack with balanced input to the DSP preamp/EQ electronics, and a
Level control. A Mic/Line switch allows for use of a microphone via the extra gain available when in the “Mic” position.
A ru output has a male XLR jack. is output allows linking of additional speaker systems, or feed of the signal to a
powered subwoofer, etc.
Bluetooth® operation’s supported include streaming and device pairing, and a separate Level control is provided for the
Bluetooth® signal level adjustment.
Rear Panel
BOTTOM
VOLTAGE SELECTOR SWITCH (1)
e AQ™15 has a voltage selector switch to allow switching between an input power voltage of 120VAC to a
range from 220VAC to 240VAC, all at either 50 or 60 cycles per second (Hz). It should be set to the proper volt-
age for your country out of the box. However, world conditions are such that some areas have power line voltag-
es diering from the voltage used by the majority of any given locale.
Be sure to check the position of the voltage selector switch to see that it matches the power line voltage used
locally. If it does not match, then to change the voltage to the correct one, follow the steps outlined below.
Changing the Voltage Range of the AQ™15
First, make sure the AQ™15 is disconnected from the power line, and that the power switch (3) is in the OFF
position.
Second, unscrew the screws holding the clear switch protector on the voltage selector switch (1) just a little, just
enough to allow rotation of the clear switch protector. e screws DO NOT need to be unscrewed very far.
ird, rotate the clear plastic protector about 90 degrees to uncover the voltage selector switch. One side of the
cover has a slot, the other just a hole, the side with the hole is the side that pivots.
Fourth, using a small at blade screwdriver, push the red selector switch slide plate to the other side from where
it was. e voltage that is now visible on the red slide plate is the one you have selected.
Fih, rotate the clear plastic protector back underneath the loosened screws, and tighten one down while hold-
ing the clear plastic protector in place. Tighten the other screw down, and make sure both screws are tight.
If the screws are over-tightened, this could damage the voltage selector switch clear plastic cover, so do not apply
excessive force to the screws!
e IEC power cord that is correct for your locale can now be plugged into the IEC receptacle (2), and the Power
Produkt Specifikationer
| Mærke: | Peavey |
| Kategori: | Højttaler |
| Model: | AQ 15 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Peavey AQ 15 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Højttaler Peavey Manualer
15 November 2024
12 November 2024
18 September 2024
15 September 2024
14 September 2024
31 August 2024
22 August 2024
16 August 2024
14 August 2024
11 August 2024
Højttaler Manualer
- Højttaler Amazon
- Højttaler Monitor Audio
- Højttaler Ewent
- Højttaler Indiana Line
- Højttaler Deaf Bonce
- Højttaler Montarbo
- Højttaler James
- Højttaler Hertz
- Højttaler SBS
- Højttaler Rockford Fosgate
- Højttaler Etekcity
- Højttaler Inter-M
- Højttaler Watson
- Højttaler TVLogic
- Højttaler Soen
Nyeste Højttaler Manualer
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
31 Maj 2025
31 Maj 2025
31 Maj 2025
10 April 2025
10 April 2025