Peavey Impulse 1012 Manual

Peavey Højttaler Impulse 1012

Læs gratis den danske manual til Peavey Impulse 1012 (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Peavey Impulse 1012, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

www.peavey.com

Impulse® 1012

Product

Specications

Specications - Peavey® Impulse® 1012

Frequency Response: 67 Hz to 18 kHz, 1 meter on axis, swept sine in anechoic environment

Usable Low Frequency limit (-10 dB point anechoic): 55 Hz

Nominal sensitivity (1W @1M, swept sine input in anechoic environment):

96 dB (average)

Maximum Sound Pressure Level (1 meter):

123 dB continuous

129 dB SPL peak with music

Radiation Angle measured at -6 dB point of polar response:

Nominal: 110 degrees horizontal X 80 degrees vertical

(Axis of the vertical main polar lobe is angled down 10 degrees, resulting in the angular pattern with respect to

straight ahead being +30, -50 degrees)

Transducer Complement:

Low Frequency Section:

1 X 12” woofer, vented

Black Widow® 1208-8 BMX WR SS SF (03617970)

High Frequency Section:

1 X 1.0” exit, 50 mm voice coil

RX™22N Neodymium compression driver on asymmetrical Quadratic roat CD Horn

Box Tuning Frequency: 51 Hz

Electro-acoustic crossover frequency: 2 kHz

Crossover type:

Internal passive two-way crossover with driver EQ, and driver level matching incorporated.

Crossover Slopes:

12 dB/octave (2nd order) each driver, both with staggered poles and driver EQ.

Impedance (Z) in ohms (Ω):

Nominal: 8.0 Ω

Minimum: 5.1 Ω

Input Connections:

Two NL-4 twist-lock jacks in parallel with a 4 position screw terminal barrier strip.

Enclosure Materials & Finish:

Black polypropylene plastic with textured surface, black powder-coated perforated full-coverage grille.

Mounting provisions:

Four rubber feet provide vibration free oor or stage use, and a molded-in stand mounting cup is on the bottom

for use with 1 3/8” stand poles. Unit has two four insert mounting groups (8 inserts total) of M6 metric inserts,

for use with the Peavey VM 70 mounting bracket, one on the le side, and one on top.

Produkt Specifikationer

Mærke:	Peavey
Kategori:	Højttaler
Model:	Impulse 1012

Har du brug for hjælp?

Hvis du har brug for hjælp til Peavey Impulse 1012 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Peavey Manualer

Peavey PVXp 15 DSP Manual

15 November 2024

Peavey Messenger M100 Manual

12 November 2024

Peavey RBN 215 Manual

18 September 2024

Peavey PVs 18 Manual

15 September 2024

Peavey SP 218P Manual

14 September 2024

Peavey S-12825 RB Manual

31 August 2024

Peavey SSE 10 Manual

22 August 2024

Peavey RBN 118 Manual

16 August 2024

Peavey PHR 860S Manual

14 August 2024

Peavey ISM 5Tx Manual

11 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Greadio R-919 Manual

14 Juni 2025

J.W. SPEAKER 8700 Evolution J2 Manual

14 Juni 2025

SpringFlora HM11 Manual

14 Juni 2025

Fiodio F-130 Manual

14 Juni 2025

HEYSONG Bubble Manual

14 Juni 2025

ANCOBER ACB-001 Manual

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025