Peavey Impulse 1015 Manual

Peavey Højttaler Impulse 1015

Læs gratis den danske manual til Peavey Impulse 1015 (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Peavey Impulse 1015, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
www.peavey.com
Impulse® 1015
Product
Specications
Specications - Peavey® Impulse® 1015
Frequency Response: 68 Hz to 18 kHz, 1 meter on axis, swept sine in anechoic environment
Usable Low Frequency limit (-10 dB point anechoic): 59 Hz
Nominal sensitivity (1W @1M, swept sine input in anechoic environment): 97 dB (average)
Maximum Sound Pressure Level (1 meter):
124 dB continuous
130 dB SPL peak with music
Radiation Angle measured at -6 dB point of polar response:
Nominal: 110 degrees horizontal X 80 degrees vertical
(Axis of the vertical main polar lobe is angled down 10 degrees, resulting in the angular pattern with respect to
straight ahead being +30, -50 degrees)
Transducer Complement:
Low Frequency Section:
1 X 15” woofer, vented
Black Widow® 1508-8 BWX WR SS SF (03617980)
High Frequency Section:
1 X 1.0” exit, 50 mm voice coil
RX™22N Neodymium compression driver on asymmetrical Quadratic roat CD Horn
Box Tuning Frequency: 45 Hz
Electro-acoustic crossover frequency: 1.9 kHz
Crossover type:
Internal passive two-way crossover with driver EQ, and driver level matching incorporated.
Crossover Slopes:
12 dB/octave (2nd order) each driver, both with staggered poles and driver EQ.
Impedance (Z) in ohms (Ω):
Nominal: 8.0 Ω
Minimum: 5.3 Ω
Input Connections:
Two NL-4 twist-lock jacks in parallel with a 4 position screw terminal barrier strip.
Enclosure Materials & Finish:
Black polypropylene plastic with textured surface, black powder-coated perforated full-coverage grille.
Mounting provisions:
Four rubber feet provide vibration free oor or stage use, and a molded-in stand mounting cup is on the bottom
for use with 1 3/8” stand poles. Unit has two four insert mounting groups (8 inserts total) of M6 metric inserts,
for use with the Peavey VM 70 mounting bracket, one on the le side, and one on top.

Produkt Specifikationer

Mærke: Peavey
Kategori: Højttaler
Model: Impulse 1015

Har du brug for hjælp?

Hvis du har brug for hjælp til Peavey Impulse 1015 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler Peavey Manualer

Peavey

Peavey PVXp 15 DSP Manual

15 November 2024
Peavey

Peavey Messenger M100 Manual

12 November 2024
Peavey

Peavey RBN 215 Manual

18 September 2024
Peavey

Peavey PVs 18 Manual

15 September 2024
Peavey

Peavey SP 218P Manual

14 September 2024
Peavey

Peavey S-12825 RB Manual

31 August 2024
Peavey

Peavey SSE 10 Manual

22 August 2024
Peavey

Peavey RBN 118 Manual

16 August 2024
Peavey

Peavey PHR 860S Manual

14 August 2024
Peavey

Peavey ISM 5Tx Manual

11 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Edifier

Edifier MP330 Manual

15 Juni 2025
Hecate

Hecate G1500 Manual

14 Juni 2025
XLEADER

XLEADER SoundAngel A8 Manual

14 Juni 2025
RCF

RCF DU 31EN Manual

14 Juni 2025
Omnitronic

Omnitronic PS-2.5WB Manual

14 Juni 2025
Greadio

Greadio R-919 Manual

14 Juni 2025
J.W. SPEAKER

J.W. SPEAKER 8700 Evolution J2 Manual

14 Juni 2025
SpringFlora

SpringFlora HM11 Manual

14 Juni 2025
Fiodio

Fiodio F-130 Manual

14 Juni 2025
HEYSONG

HEYSONG Bubble Manual

14 Juni 2025