Peavey SSE 12 Manual

Peavey Højttaler SSE 12

Læs gratis den danske manual til Peavey SSE 12 (12 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Peavey SSE 12, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
SNOITACIFICEPS
SSE ™ 12
Description
The is new enclosu serie SSE a re s
featuring high er atings with custo pow r m
components, sleek look and unique a a ,
snap-in metal grille. The is SSE 12 a
two-way system featuring the highl y
acclaimed ea ey 14 titaniu P v T m
comp ession dri er with the di erse Sounr v v d
Gua IV eeter otection network anrd tw pr d
P v 1 4 ea ey 2" woofer with 2.5" (6
mm) oice coil for smooth esponse. Th v r e
SSE 12 r W pr r d is ated at 500 atts og am an
1,000 atts peak. This light eighW w t
speaker system is ideal for smaller enue v s
whe space is at emium. Connectionre a pr s
are a rmade using fou -pin twist loc k
connector or pa alleled two-positio a r n
terminal block for additional cabinets. Th e
SSE 12 r e incorpo ates ying points on th
top of the unit and mounting points on the
bottom for utilizing the Peavey VersaMount
70 mounting bracket. The SSE Series is
available in black or white nishes.
Features:
• Two-way sound reinforcement
enclosure
• Designed for permanent install
• Available in black or white nishes
• P vea ey ® 1 h 2" woofer wit
2.5" (64 mm) oice coi v l
• Peavey 14T ™ titanium diaphragm
compression driver
• Sound Guard ™ IV tweeter protection
network
• Seven ying points (six M10 for
suspension and one for angle M6
adjustment)
• Mounting point for VersaMount ™ 70
bracket
• 13 mm birch plywood construction
• 500 Watts program/1000 Watts peak
power handling
• 79 Hz to 17 kHz
• 98 dB at 1W/1m
• 8 Ohms
Fr requency esponse, me on axis 1 ter - ,
swept-sine in anechoic nvi e ronment:
79 Hz to 17 kHz )(±3 dB
Usable low frequency limit (-10 dB
point):
60 Hz
Pow : er handling
Full an r ge:
500 W program
1,00 ak0 W pe
Sound pressure vle el, 1 Watt, 1 meter in
anechoic envi onment r :
Full an r ge:
98 dB SPL 3 ut)(2.8 V inp
Maximum sound essu pr re vel le
(1 meter) :
Full an r ge:
1 dB SPL t uous22 con in
128 SPL peakdB
2
Radiation angle measu ed at -6 r dB
point of polar esponse r :
500 Hz to 1.6 kHz :
Horiz 0˚ 15. 11 ± ˚
Vert. 1 ± ˚20˚ 30
1.6 kHz to kHz 5 :
Horiz 75˚ 15. ± ˚
Vert. 7 ± ˚0˚ 25
5 :kHz to 16 kHz
Horiz 85˚ 15. ± ˚
Vert. ± 10˚40˚
Di ectivity factor r, Q :(Mean)
1 ± 70.27 6.0
Di ectivity index, Di (Mean)r :
9.38 dB 2.57 ± dB
Transducer complement :
Low Fr Sequency ection:
Peavey er th 2 " woof wi .5
(6 oic coi4 ) vmm e l
High Fr Sequency ection:
Pea ey 14v T™ um phrtitani dia agm
comp ession drir ver on a 90° x 40°
constant di ectivity hor r n
Box fr :tuning equency
Low frequency section :
74 Hz
Harmonic disto tion r :
1% ated r power
S :econd harmonic
1 : 32%00 Hz 0.
1 : 10%kHz 0.
Third :harmonic
1 : %00 Hz 0.40
1 : %kHz 0.22
1 r0% ated power
S :econd harmonic
1 : %00 Hz 0.56
1 : %kHz 0.79
Third :harmonic
1 : 00 Hz 0.79%
1 : %kHz 0.25
Elect o-acousticr crossover frequency
(internal passi e) v :
2.8 kH z
Impedance (Z) :
Full ange r :
Nominal: 8 Ω
Minimum 5.1: Ω
Input Connection :
1 rfou -Pin twist lock connector in pa alle r l
with one 1-position terminal stri p
Enclosure materials and nish
Trapezoidal, dado-joined 13 mm birch
enclosure nished with a textured acrylic
polyurethane with a full length metal
grille covered and acoustical-grade grille
cloth. Available in black or white or
nishes
Mounting provisions:
(6) M10 threaded mounting
suspension points ee each top (thr and
one each side and back). Use only
forged machinery eye bolt, shoulder
DIN 580, ASTM A489, or BGV-C1. M6(1)
x 1.0mm threaded mounting point on
back bottom adjustments.for angle
(4) M6 mounting x 1.0mm threaded points
on bottom to accommodate use of
VersaMount ™ 70 adjustable mounting
bracket.
DO NOT suspend this unit upside
down using VersaMount system.
Dimensions (H x W x D):
Front:
24.5" x 17.43" x 13.20"
622 mm x 443 mm x 335 mm
Rear:
24.5" x 13.14" x 13.20"
622 mm x 334 mm x 335 mm
Net Weight:
40 lbs. (18.1 kg)
Frequency response
This measurement is useful in determining
how accurately a given unit reproduces an
input signal. The frequency response of
the SSE 12 is measured at a distance of 1
meter using a 1 Watt (into the nominal
impedance) swept-sine input signal. As
shown in gure 1, the selected drivers in
the SSE 12 combine to give a smooth
frequency response from 79 Hz to 17 kHz.
Directivity
Beamwidth is derived from the -6 dB
points from the polar plots (see gure 3)
which are measured in a whole space
anechoic environment. Q and Directivity
Index are plotted for the on-axis
measurement position. These
specications provide a reference to the
coverage characteristics of the unit and
provide insight into proper placement and
installation in the chosen environment. The
blending of the components of the SSE 12
exhibit a desirable beamwidth and
directivity (gures 3 & 4) suitable for
sound reinforcement applications.
Power handling
There are many dierent approaches to
power handling ratings. Peavey rates this
loudspeaker system’s power handling
using a full-range form of the AES
Standard 2-1984. Using audio band 20 Hz
to 20 kHz pink noise with peaks of four
times the RMS level, this strenuous test
signal assures the user that every portion
of this system can withstand today’s high
technology music. This rating is contingent
upon having a minimum of 3 dB of
amplier headroom available.
Harmonic distortion
Second and third harmonic distortions vs.
frequency are plotted in gures 5 & 6 for
two power levels. Ten percent (10%) of
rated input power and either one percent
(1%) of rated input power or 1 Watt,
whichever is greater. Distortion is read
from the graph as the dierence between
the fundamental signal (frequency
response) and the desired harmonic. As an
example, a distortion curve that is down
40 dB from the fundamental is equivalent
to 1% distortion.
Mounting
Caution: Before attempting to suspend or
mount this speaker, consult a certied
structural engineer. The speaker may fall
due to improper installation, resulting in
serious injury and property damage. DO
NOT suspend or mount any other product
or device from this enclosure. The
maximum enclosure angle is 45°. Use only
Grade 8.8 Metric hardware or better. All
rigging is the responsibility of others.
Architectural and Engineering
Specications
The loudspeaker system shall have an
operating bandwidth of 79 Hz to 17 kHz.
The nominal output level shall be 98 dB
when measured at a distance of 1 meter
with an input of 1 Watt. The nominal
impedance shall be 8 Ohms. The maximum
program power handling shall be 500
Watts with a peak power input of at least
1000 Watts and a minimum amplier
headroom of 3 dB. The nominal radiation
geometry shall be 90˚ in the horizontal
plane and 40˚ in the vertical plane. The
outside dimensions shall be 24.5" high by
17.43" wide by 13.20" deep. The weight
shall be 40 lbs. The loudspeaker system
shall be a model SSE 12.
Features and specications subject to
change without notice.
WARRANTY INFORMATION AVAILABLE ONLINE
NOTE:

Produkt Specifikationer

Mærke: Peavey
Kategori: Højttaler
Model: SSE 12

Har du brug for hjælp?

Hvis du har brug for hjælp til Peavey SSE 12 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler Peavey Manualer

Peavey

Peavey PVXp 15 DSP Manual

15 November 2024
Peavey

Peavey Messenger M100 Manual

12 November 2024
Peavey

Peavey RBN 215 Manual

18 September 2024
Peavey

Peavey PVs 18 Manual

15 September 2024
Peavey

Peavey SP 218P Manual

14 September 2024
Peavey

Peavey S-12825 RB Manual

31 August 2024
Peavey

Peavey SSE 10 Manual

22 August 2024
Peavey

Peavey RBN 118 Manual

16 August 2024
Peavey

Peavey PHR 860S Manual

14 August 2024
Peavey

Peavey ISM 5Tx Manual

11 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Edifier

Edifier MP330 Manual

15 Juni 2025
Hecate

Hecate G1500 Manual

14 Juni 2025
XLEADER

XLEADER SoundAngel A8 Manual

14 Juni 2025
RCF

RCF DU 31EN Manual

14 Juni 2025
Omnitronic

Omnitronic PS-2.5WB Manual

14 Juni 2025
Greadio

Greadio R-919 Manual

14 Juni 2025
J.W. SPEAKER

J.W. SPEAKER 8700 Evolution J2 Manual

14 Juni 2025
SpringFlora

SpringFlora HM11 Manual

14 Juni 2025
Fiodio

Fiodio F-130 Manual

14 Juni 2025
HEYSONG

HEYSONG Bubble Manual

14 Juni 2025