Peerless KIL646-EUK Manual
Peerless
Ikke kategoriseret
KIL646-EUK
Læs nedenfor 📖 manual på dansk for Peerless KIL646-EUK (20 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 13 personer og blev bedømt med 4.6 stjerner i gennemsnit af 7 brugere
Side 1/20
12013-09-20 #:150-9009-1
ENG
BLACK
KIL640
KIL642
KIL646
KIL647
SILVER
KIL640-S
KIL642-S
KIL646-S
KIL647-S
22013-09-20 #:150-9009-1
ENG - Do not begin to install product until you have read and understood the instructions and warnings
contained in this user guide. This product is designed to be installed on wood stud, solid concrete or cinder
block walls. Hardware is included for wood stud, solid concrete and cinder block installation. Before installing
make sure the supporting surface will support the combined load of the equipment and hardware. Screws must
be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never exceed the
Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift and position
equipment. This product is intended for indoor use only. Use of this product outdoors could lead to product
failure or personal injury. To reduce the risk of electric shock or re, do not expose product to water or moisture.
Be sure power cord is routed so that it will not be tripped on, stepped on, or pinched by heavy items. Avoid
overloading electrical outlets or extension cords. Always disconnect the power cord from the power outlet
when installing, servicing, or not using the product for an extended period of time. Do not block ventilation
slots or fan exhaust on product. Blocking airow could damage product. Arrange product to allow air to ow
freely around product. Keep product away from direct sunlight or any source of heat. For support please call
800-4-SIGNAGE.
WARNING
SymbolsENG
WARNING
ENG
#
Skip to step.
ENG
x3
Screws must get at least three
full turns and t snug.
ENG
Do not overtighten screws.
ENG
1
2
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
+1/2
4
3
Produkt Specifikationer
| Mærke: | Peerless |
| Kategori: | Ikke kategoriseret |
| Model: | KIL646-EUK |
Har du brug for hjælp?
Hvis du har brug for hjælp til Peerless KIL646-EUK stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Peerless Manualer
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
Ikke kategoriseret Manualer
- Ikke kategoriseret Milestone Systems
- Ikke kategoriseret Silent Angel
- Ikke kategoriseret Antari
- Ikke kategoriseret Jungle Gym
- Ikke kategoriseret Wolfcraft
- Ikke kategoriseret Eurolite
- Ikke kategoriseret Busch-Jaeger
- Ikke kategoriseret GoldenEar Technology
- Ikke kategoriseret ViewCast
- Ikke kategoriseret Xhose
- Ikke kategoriseret Gardol
- Ikke kategoriseret SoundLAB
- Ikke kategoriseret Epson
- Ikke kategoriseret Biostar
- Ikke kategoriseret NewStar
Nyeste Ikke kategoriseret Manualer
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025