Philips AJ3977 Manual

Philips Clockradio AJ3977

Læs gratis den danske manual til Philips AJ3977 (6 sider) i kategorien Clockradio. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Philips AJ3977, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

AJ3977

CD Clock Radio

English Controls/ Power supply

Controls (See 1)

Front panel

1ALARM RESET/ y

–

stops the active alarm for 24 hours

–

turns the set on/off

–

turns off SLEEP function

2 LIFT TO OPEN

–

lift here to open CD

door

TUNER – selects CD or radio sound

source

4ALARM 2

–

turns on ALARM 2 and selects radio, CD

or buzzer mode

–

stops ALARM 2 for 24 hours

–

turns off ALARM 2

DIM

– changes the brightness of display

illumination

REPEAT ALARM

– stops the alarm for a

5-minute period

2; - starts or pauses CD playback

BAND 9

Tuner: selects wavebands

CD: stops CD playback

HOUR/ MIN,TUNING ∞ / §

Clock: adjusts the hour/minute for clock/

alarm time (up)

Tuner:

tunes to radio stations (down, up)

CD: skips or searches CD track/ passage

backward/ forward

VOLUME3 4,

–

adjusts volume level

PRESET4

–

selects a preset radio station

(down)

DISPLAY

–

toggles clock display/ status of

the set

REPEAT/ PRESET3

CD:

repeats a track /program/ entire CD

Tuner: selects a preset radio station (up)

SET TIME/PROGRAM

Clock: sets clock time

Tuner: programs preset stations

CD:

programs tracks and reviews the

program

SLEEP - displays/adjusts/turns off sleep timer

^ALARM 1

–

turns on ALARM 1 and selects radio, CD

or buzzer mode

–

stops ALARM 1 for 24 hours

–

turns off ALARM 1

Back and bottom panels

RESET

– use a ballpoint pen to press the

hole if the set/display does not react to any of

the controls

Battery compartment

–

insert 2 x 1.5V

AA batteries (not supplied) for clock memory

backup

(

Power cord - connects to wall outlet

)FM antenna – improves FM reception.

CAUTION

Use of controls or adjustments or

performance of procedures other

than herein may result in hazardous

radiation exposure or other unsafe

operation.

Power Supply

1 Check if the power voltage, as shown on the

back of the set, corresponds to your local

power supply.

2 Connect the power plug to the wall outlet..

The power supply is switched on and 12:00

appears on the display.You can set the clock

now. (See Setting the clock)

3 To turn off the set completely, withdraw the

power cord from the wall socket.

The type plate is located on the back

of the set

User manual

Alarm

General

Two different alarm times ALARM1 and

ALARM2 can be set in the radio, CD or

buzzer mode.

Setting the alarm time and

mode

1 Check the set is switched off.

2 Press or ALARM 1 ALARM 2 once or

more to switch on the alarm and select tuner,

CD or buzzer alarm modes.

➜ Hour and minute digits flash (12:00 flashes

by default). Display shows AL1 (or AL2)

TUNER,AL1 AL2 CD,AL1 AL2(or ) (or )

(See 2)

3 Hold down or press

HOUR/ MIN

repeatedly to adjust the hours and minutes

respectively. Release

HOUR/ MIN

when you

have reached the correct setting.

4 Press

SET TIME/PROGRAM to confirm.

➜The display returns to clock time. AL1 or

AL2 appears. )(See 3

➜ At the set alarm time, the radio, CD or

buzzer switches on and about 60 minutes

later, switches off automatically.

➜

If you set and activate the same time for

both alarms, only

ALARM 1

will be

activated at the set alarm time.

➜ You will deactivate the alarms after

turning on the set.

•To check your alarm time setting, press

ALARM 1 ALARM 2or

Helpful hints:

- If CD alarm mode is selected, a CD must be

inserted. The buzzer alarm option will auto-

matically replace the CD alarm if you

have forgotten to insert a CD.

- If you have an alarm set in the radio or CD mode,

make sure you have adjusted the volume loud

enough to wake you up.

Switching off the alarm

There are 3 ways of switching off the alarm.

Unless you choose to cancel the alarm

completely, the Daily Alarm Reset option will

be automatically selected after 60 minutes-

from the time your alarm time first goes off.

Daily alarm reset

If you want the alarm mode to be stopped

immediately but also wish to repeat the

alarm call at the same time for the following

day:

• Press ALARM RESET/ yduring the

alarm call.

• or press ALARM 1 ALARM 2 or during

the alarm call.

Repeat alarm

This will repeat your alarm call at 5-minute

intervals.

1 During the alarm call, press REPEAT

ALARM.

2 Repeat if desired (up to a maximum 12

times)

Switching off the alarm completely

•Press

ALARM 1 ALARM 2 or

once or

more until the AL1 AL2 or disappears.

Alarm

Basic functions

Clock

Basic functions

Switching on and off and

selecting functions

1 Press ALARM RESET/ yto switch on.

= The set switches to the last sound source

selected.

= The active alarm is switched off.

2 Press

TUNER

once or more to select:

CD TUNERor function.

3 Press yto switch off the set.

= The active alarm is switched on.

Helpful hints:

–The tuner presets and the volume level will be

retained in the set’s memory.

Adjusting volume

• Adjust the volume with the

VOLUME3 4,

controls.

➜Display shows the volume level and a

number from 00-20.

Illumination brightness

• Press

DIM

once or more.

=The brightness of the display can be

adjusted.

Low Low ➟ ➟Bright

Clock

Clock memory backup

When power failure occurs, the set will be

turned off. When the power supply returns,

12:00 appears on the display and you need to

reset the clock.

To retain the clock/ alarm time in the event of

AC power failure or disconnection, insert 2 x

1.5V batteries, type AA (not supplied), into

the battery compar tment: it will act as clock

memory backup; However, operation of the

alarms, tuner and CD are excluded.

1 Connect the power plug to the wall outlet.

2 Insert 2 x AA batteries into the battery

compartment..

• Replace the batteries once a year, or as

often as necessary.

Batteries contain chemical substances,

so they should be disposed of properly

Setting the clock

The time is displayed using 12-hour clock

where or PM MW lights up.

1 Check the set is switched off.

2 Press

SET TIME/PROGRAM.

➜ Display: hour and minute digits flash

(12:00 flashes by default)

3 Hold down or press

HOUR/ MIN

repeatedly to adjust the hours and minutes

respectively. Release

HOUR/ MIN

when you

have reached the correct setting.

4 Press

SET TIME/PROGRAM

to confirm.

Helpful hints:

- If no action is executed within 10 seconds, the

display will return to previous time setting.

Standby power consumption

(clock mode) 1.0W

Produkt Specifikationer

Mærke:	Philips
Kategori:	Clockradio
Model:	AJ3977

Har du brug for hjælp?

Hvis du har brug for hjælp til Philips AJ3977 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Clockradio Philips Manualer

Philips TAR5100 Manual

12 August 2025

Philips TAV2000 Manual

12 August 2025

Philips TAV2000DB Manual

5 August 2025

Philips TAR4500 Manual

3 April 2025

Philips TAR4600 Manual

3 April 2025

Philips AJ3116 Manual

15 Januar 2025

Philips AJ3720 Manual

15 Januar 2025

Philips AJL308 Manual

14 Januar 2025

Philips TAR1509 Manual

4 Januar 2025

Philips TAR1609 Manual

2 Januar 2025

Clockradio Manualer

Nyeste Clockradio Manualer

La Crosse Technology 616-1413R-10W Manual

14 August 2025

Adler AD 1916 Manual

12 August 2025

Hama Elegance Pro 186318 Manual

10 August 2025

TFA 98.1036 Manual

8 August 2025

TFA 60.2549.08 Manual

8 August 2025

Smartwares IOL001H Manual

8 August 2025

TFA 60.2556.02 Manual

8 August 2025

TFA 60.2554.01 Manual

7 August 2025

TFA 60.2503 Manual

7 August 2025

TFA Loom 60.1031.10 Manual

7 August 2025