Philips LatteGo CA6708 Manual

Philips Ikke kategoriseret LatteGo CA6708

Læs gratis den danske manual til Philips LatteGo CA6708 (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Philips LatteGo CA6708, eller vil du spørge andre brugere om produktet?

Side 1/9
© 2022 Philips Domestic Appliances Holding B.V.
All rights reserved
4219.450.4968.1 (01/2022)
>75 % recycled paper
>75 % papier recyclé
English
Dear customer,
Congratulations with the purchase of your new
LatteGo carafe.
With the carafe of Philips LatteGo EP2xxx, EP3xxx,
5000 series, you may experience some differences in
the volume of your milk drinks, which you can easily
adjust following the instructions below.
Adjusting the milk froth volume for
Philips 5000 LatteGo
1 Make sure that you have placed LatteGo (milk
container) and that it contains enough milk.
2 Press and hold the button of the milk-based drink
you want to adjust (for café au lait only, press and
hold the start button after selecting it), until the
display shows the MEMO icon.
3 Press the OK button when the cup contains the
desired amount of milk. Then the machine starts
dispensing the coffee.
4 Press the OK button again to save the desired
coffee volume.
Adjusting the milk froth volume for
Philips EP2xxx, EP3xxx LatteGo series
1 Make sure that you have placed LatteGo (milk
container) and that it contains enough milk.
2 Tap the milk-based drink icon of your choice.
3 Depending on your preference, choose the low,
medium or high milk volume with the (milk)
quantity button.
4 Press the start/stop button to brew your milk-
based coffee.
- For EP2xxx, EP3xxx LatteGo series, you can also
adjust the milk froth volume to your own
preference. Go to the chapter 'Programming
the highest default setting of your drinks' in
the user manual of your coffee machine.
You can find detailed instructions in the user manual.
You can also visit forwww.philips.com/coffee-care
video instructions.
Čeština
Vážený zákazníku,
Gratulujeme vám kzakoupení nové karafy LatteGo.
Při používání karafy Philips LatteGo řady EP2xxx,
EP3xxx, 5000 můžete zaznamenat určité rozdíly
vobjemu mléčnýchpojů, které lze snadno upravit
podle následujících pokynů.
Philips 5000 LatteGo: nastavení
objemu mléčné pěny
1 Ujistěte se, že máte vloženou nádobu na mléko
LatteGo aže je vní dostatek mléka.
2 Stiskněte a podržte tlačítko mléčného nápoje,
který chcete upravit (pouze vpřípadě cafè au lait
po výběrupoje stiskněte a podržte tlačítko
spuštění), dokud se na displeji neobjeví ikona
MEMO.
3 Jakmile šálek obsahuje požadované množství
mléka, stiskněte tlačítko OK . Poté začne přístroj
napouštět kávu.
4 Požadovaný objem kávy uložte dalším stisknutím
tlačítka OK .
Nastavení objemu mléčné pěny
upřístrojů řady Philips EP2xxx,
EP3xxx LatteGo
1 Ujistěte se, že máte vloženou nádobu na mléko
LatteGo aže je vní dostatek mléka.
2 Klepněte na nápoj obsahující mléko dle vašeho
výběru.
3 Vzávislosti na svých preferencích zvolte tlačítkem
pro množství (mléka) malý, střední nebo velký
objem mléka.
4 Stiskněte tlačítko start/stop pro přípravu kávu
smlékem.
- ULatteGo řady EP2xxx, EP3xxx můžete též
podle svých preferencí nastavit objem
zpěněného mléka. Vysvětlení postupu najdete
vuživatelské příručce ke kávovaru vkapitole
Programování nejvyššího výchozího množství
nápojů.


Produkt Specifikationer

Mærke: Philips
Kategori: Ikke kategoriseret
Model: LatteGo CA6708

Har du brug for hjælp?

Hvis du har brug for hjælp til Philips LatteGo CA6708 stil et spørgsmål nedenfor, og andre brugere vil svare dig