Phoenix Gold SX69CX Manual

Phoenix Gold Højttaler SX69CX

Læs gratis den danske manual til Phoenix Gold SX69CX (6 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Phoenix Gold SX69CX, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Features

• Injection Molded Aluminum Plated

Polypropylene Cone - Injection molded to be

very light and rigid for excellent signal tracking

• Butyl Rubber Surround - Advanced butyl

rubber surround is more rugged than foam,

resists moisture and UV, and is extremely well

damped

• Silk Dome Tweeter - Provides smooth, detailed

and warm high frequency response

• Interwoven Tinsel Leads - Tinsel leads woven

directly into the spider provide added strength

and reliability

• Rigid Powder Coated Steel Frame - Designed

for precise motor alignment

• Optimized Magnet-Motor Structure - For high

efciency and clarity of sound reproduction

Models: SX5CS, SX6CS, SX65CS

Component Speaker

Set Manual

Manuel de Composantes

Caractéristiques

• Cône en polypropylène plaqué avec

aluminium moulé par injection - pour être très

léger et rigide an d’assurer un excellent suivi

des signaux

• Caisson de basses en caoutchouc butyle - Le

caisson de basse avancé en butyle est plus

robuste que la mousse, résiste à l’humidité et

aux UV, et ore un amorti extrême

• Tweeter à dôme en soie - fournit une réponse

douce, détaillée et chaude à haute fréquence

• Fils clinquant entrelacés - ls clinquant

entrelacés directement dans l’araignée

fournissant un ajustement de la puissance et

une meilleure abilité

• Armature en acier revêtue de poudre rigide -

conçue pour un alignement précis du moteur

• Structure d’aimant-moteur optimisée - pour un

rendement élevé et une clarté de reproduction

sonore

Características

• Cono de polipropileno recubierto con aluminio

moldeado por inyección - El moldeado por

inyección es muy ligero y rígido para un excelente

seguimiento de la señal.

• Cubierta de caucho butílico - El caucho butílico

avanzado es más resistente que la espuma,

resiste la humedad y los rayos UV, y está

extremadamente bien amortiguado

• Tweeter de cúpula de seda - Proporciona una

respuesta de alta frecuencia, suave, detallada y

cálida.

• Cable Oropel entrelazado - Los hilos de oropel

entrelazados directamente dentro de la araña

proporcionan mayor resistencia y conabilidad.

• Bastidor de acero rígido con recubrimiento de

polvo - Diseñado para la alineación precisa del

motor.

• Estructura motor- imán optimizada - Para una

alta eciencia y claridad en la reproducción del

sonido.

SX Component Speaker Set Manual

BASIC INSTALLATION

Selecting the placement of your new SX Component speakers

could be as easy as using the existing factory locations or may

require you to create a new location. Speaker placement in

the door, dash, or rear deck is the most common. See your

local Phoenix Gold Dealer for additional location and

mounting assistance.

DOORS/REAR DECK

1. Many vehicles already have factory locations (Figure 1)

to house the “DROP IN” feature of the SX Component

speakers. If no existing locations are available or are not

used, check the desired location for adequate cutout

area and any depth obstructions. Make sure to allow

sufcient clearance for window tracks, structural braces,

trunk lid springs, etc.

2. Assuming enough area and depth is available, use the

provided template and trace the speaker cutout and

mounting holes onto the surface of the mounting location.

3. If the mounting surface is not structurally strong enough

TWEETER ADJUSTMENT

The tweeters pivot in their housings. When mounted low in

the door, angle the tweeter up for better high frequency

performance. In rear deck or dashboard installations, angle the

tweeter away from the rear glass to reduce destructive

reections.

CROSSOVER ADJUSTMENT

The crossover provided with the SX component set is optimized

to give the most accurate in-car response. Use only the cross-

over provided; the use of any other crossover may result in

damage to one or more of the SX series components.

to accommodate screws, (i.e. plastic, cardboard) use

the pro vided speed clips which will act as a nut for the

supplied screws.

4. Always provided water protection, if not supplied in the

vehicle. We suggest using a rain shield or equivalent. If in

doubt, please contact your Phoenix Gold Dealer.

SPEAKER INSTALLATION WITHOUT GRILL

Phoenix Gold has provided a foam mounting gasket. When

installing your new component speakers in a factory location

make sure to use the foam mounting gasket as shown in gure

1. For reverse mounted speakers place the foam gasket in

front of the speaker. This will ensure an air tight seal for your SX

speakers.

For more custom applications, or cases where the factory grill

will not be used, a high excursion protective grill has been

provided. When installing your new component speakers with

the provided SX grill use gure 2. Make sure to use

the rubber gasket to get an air tight seal.

Connect the left amplier output to the crossover for the

left component set, and the right amplier output to the

crossover for the right component set. From there connect

your component woofer and tweeters to the corresponding

crossover observing polarity (+ to +, - to -). (gure 3)

CROSSOVER INSTALLATION

We suggest you select a mounting location for the crossovers

within the cab of the vehicle, such as the kick panels or near

the amplier. If crossovers must be mounted in the door, mount

them between the moisture barrier and the innermost door

panel. MOISTURE DAMAGE WILL VOID YOUR WARRANTY.

Figure 1

Mounting the speaker in a factory location.

Figure 2

Mounting the speaker in a custom application.

INPUT MID TWT

Figure 3 TWEETER TWEETER

AMPLIFIER (NOT INCLUDED)

MID RANGE WOOFER MID RANGE WOOFER

CROSSOVER

Produkt Specifikationer

Mærke:	Phoenix Gold
Kategori:	Højttaler
Model:	SX69CX

Har du brug for hjælp?

Hvis du har brug for hjælp til Phoenix Gold SX69CX stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Phoenix Gold Manualer

Phoenix Gold ZP65BOXRGB Manual

23 Juli 2025

Phoenix Gold ZP65BOX Manual

23 Juli 2025

Phoenix Gold ZX69CXS Manual

18 Marts 2025

Phoenix Gold ZX4CXS Manual

18 Marts 2025

Phoenix Gold ZDSKFO2 Manual

9 Januar 2025

Phoenix Gold ZDSKPSA2 Manual

9 Januar 2025

Phoenix Gold ZP65 Manual

9 Januar 2025

Phoenix Gold ZDSKO1 Manual

9 Januar 2025

Phoenix Gold ZDSKVW1 Manual

9 Januar 2025

Phoenix Gold ZDSKVW2 Manual

9 Januar 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Muse M-968 BTY Manual

1 August 2025

Grundig Portable 360 Manual

1 August 2025

Grundig Band 360 Manual

1 August 2025

Grundig GBT Connect 360 Manual

1 August 2025

Muse M-968 BTR Manual

31 Juli 2025

JLab Epic Party Manual

31 Juli 2025

JVC XS-E423 Manual

30 Juli 2025

SoundTube RF31-EZ-T Manual

30 Juli 2025

Valcom VIP-480AL-W-SA Manual

30 Juli 2025

Rockustics StoneHenge II-S/T Manual

30 Juli 2025