Pioneer CA-BC-DAI.001 Manual

Pioneer Ikke kategoriseret CA-BC-DAI.001

Læs gratis den danske manual til Pioneer CA-BC-DAI.001 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Pioneer CA-BC-DAI.001, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Image Sensor: 1/3” CCD

Resolution: NTSC 510 x 492, PAL 500 x 582

TV Lines: 580

Lens: 1.7mm

Minimum Illumination: 0 Lux (LED’s on)

Infra-Red LED’s: Yes

Night Vision Distance: 35ft

Waterproof Rating: IP68

Viewing Angle: 170 Degrees

Image: Mirror

Operating Voltage: 12V DC (Negative Ground)

Current Consumption: 77-125mA @ 13.8V

Operating Temperature: -20 Degrees C to +70 Degrees C

U s e r M a n u a l

Prior to Installation

Read the manual prior to installation. Technical knowledge is necessary for installation.

Please ensure you use the correct tools to avoid damage to the vehicle or product.

Connects2 can not be held responsible for the installation of this product.

Technical Support

Connects2 want to provide a fast and suitable resolution should you encounter any tech-

nical issues. With this in mind, when contacting Connects2, try to provide as much Infor-

mation as possible. This will speed up the process and help us to help you.

Please use our dedicated online technical support centre: support.connects2.com

Iveco Reverse Camera

Iveco Daily 2014>

PRODUCT FEATURES:

DISCLAIMER:

CAM-IV2

www.connects2.com

Connects2Vision

CONTENTS

- Camera with 70cm cable to Male 4pin camera connector

- 10m 4pin to 4pin extension cable

- Camera connection cable with Female 4pin camera connector, 2x RCA Female

connectors and Female DC connector

- 1.45 DC power cable with Male DC connector

- Male to Male RCA splice

- Instructions

INSTALLATION

1. Remove the third brake light housing from the vehicle and remove the brake light

assembly and courtesy lamp.

2. Attach the brake light assembly and courtesy lamp to the CAM-IV2 and ret to

the vehicle taking care not to trap any cables.

3. Connect the Black wire to a suitable ground and connect the Red wire to the

reversing light circuit or an interface which provides a reverse signal.

4. Connect the camera to the 4pin extension cable, connect the extension cable

to the camera connection cable and connect the camera connection cable to

the display screen via the Yellow RCA connector and supplied RCA splice and en-

sure that the image is displayed correctly.

Subscribe to our YouTube Channel for installation

guides and tips... www.youtube.com/connects2

Produkt Specifikationer

Mærke:	Pioneer
Kategori:	Ikke kategoriseret
Model:	CA-BC-DAI.001

Har du brug for hjælp?

Hvis du har brug for hjælp til Pioneer CA-BC-DAI.001 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Pioneer Manualer

Pioneer TS-WX304T Manual

17 Juli 2025

Pioneer TS-WX610A Manual

17 Juli 2025

Pioneer CA-HM-TOY.013 Manual

1 Juni 2025

Pioneer SDA-RP100 Manual

10 Januar 2025

Pioneer 2MT220-BN Manual

31 December 2025

Pioneer 2MT280-MB Manual

31 December 2025

Pioneer 2LG220-BN Manual

31 December 2025

Pioneer DEH-S400DAB Manual

30 December 2025

Pioneer CA-HR-PSA-EVO.003 Manual

30 December 2025

Pioneer CA-HM-FOR.004 Manual

30 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech MIC-711-OX Manual

30 Juli 2025

Intellinet 713108 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Advantech PCIE-1753 Manual

30 Juli 2025

MXR Rockman X100 Manual

30 Juli 2025

MIPRO MI-909R Manual

30 Juli 2025

Advantech AMAX-4870 Manual

30 Juli 2025

Advantech IDK-1112P-50XGA2 Manual

30 Juli 2025

MIPRO MP-820 Manual

30 Juli 2025

Advantech ARES-12290 Manual

30 Juli 2025