Planet IGS-1600T Manual

Planet Ikke kategoriseret IGS-1600T

Læs gratis den danske manual til Planet IGS-1600T (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Planet IGS-1600T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET Industrial Multi-port

10/100/1000T Gigabit Ethernet Switch, IGS-1600T/IGS-1820TF.

In the following sections, the term “Industrial Ethernet

Switch” means the IGS-1600T or IGS-1820TF.

Open the box of the Industrial Ethernet Switch and carefully

unpack it. The box should contain the following items:

Industrial Ethernet

Switch x 1

User’s Manual x 1 RJ45 Dust Cap x 16

DIN-rail Kit Wall-mount Kit SFP Dust Cap x 2

(IGS-1820TF only)

If any of these are missing or damaged, please contact your

dealer immediately; if possible, retain the carton including the

original packing material, and use them again to repack the

product in case there is a need to return it to us for repair.

2.2 LEDDenition:

 System

LED Color Function

P1 Green Lights

Lights to indicate power input 1

has power.

P2 Green Lights

Lights to indicate power input 2

has power.

Fault LightsRed

Lights to indicate that AC or DC

power has failed.

 Per 10/100/1000BASE-T Port

LED Color Function

1000

LNK/ACT

Green

Lights

To indicate the link through that

port is successfully established at

1000Mbps.

Blinks

To indicate that the switch is

actively sending or receiving data

over that port.

10/100

LNK/ACT

Amber

Lights

To indicate the port is successfully

established at 10/100Mbps.

Blinks

To indicate that the Switch is

actively sending or receiving data

over that port.

2.5 WiringtheFaultAlarmContact

The fault alarm contacts are in the middle of the terminal block

connector as the picture shows below. Inserting the wires, the

Industrial Ethernet Switch will detect the fault status of the

power failure, and then forms an open circuit. The following

illustration shows an application example for wiring the fault

alarm contacts.

Fault Alarm Contacts

The Fault Alarm Contacts are

energized (CLOSE) for normal

operation and will OPEN when

failure occurs

Fault

Insert the wires into the fault alarm contacts

Note

1. The wire gauge for the terminal block should be

in the range between 12 and 24 AWG.

2. Alarm relay circuit accepts up to 24V, max. 1A

currents.

2.4 WiringthePowerInputs

The 6-contact terminal block connector on the top panel of

Industrial Ethernet Switch is used for two redundant power

inputs. Please follow the steps below to insert the power wire.

Caution

When performing any of the procedures like

inserting the wires or tightening the wire-clamp

screws, make sure the power is OFF to prevent

from getting an electric shock.

Insert positive and negative DC power wires into contacts 1

and 2 for POWER 1, or contacts 5 and 6 for POWER 2.

Fault

V1+ V2+

PWR2PWR1

Max. fault loading: 24V, 1A

DC Inp ut: 12-48V , 1.5A ma x.

Input: 24V , 1A max .

1 2 3 4 5 6

2.HardwareIntroduction

2.1 SwitchFrontPanel

The front panel of the consists of Industrial Ethernet Switch

Ethernet interfaces and LED indicators.

 Front View

IGS-1600T

FaultP2P1

ACT

1000 LNK

ACT

10/100 LNK

IGS-1820TF

FaultP2P1

ACT

1000 LNK

ACT

10/100 LNK

1000 LNK/ACT

Figure1:

IGS-1600T Front View

Figure2:

IGS-1820TF Front View

Per1000BASE-XSFPPort

 (Port-17andPort-18ofIGS-1820TF)

LED Color Function

LNK/ACT Green

Lights

To indicate the port is successfully

established at 1000Mbps.

Blinks

To indicate that the Switch is

actively sending or receiving data

over that port.

2.3 SwitchUpperPanel

The upper panel of the Industrial Ethernet Switch consists of

one terminal block connector within two power input and one

relay output.

Fault

V1+ V2+

PWR2PWR1

Max. fault loading: 24V, 1A

DC Inp ut: 12- 48V , 1.5A ma x.

Input: 24V , 1A max .

1 2 3 4 5 6

Figure3:IGS-1600T and IGS-1820TF Top View

Tighten the wire-clamp screws for preventing the wires from

loosening.

1 2 3 4 5 6

Power 1 Power 2Fault

+ - + -

Note

1. The wire gauge for the terminal block should be

in the range between 12 and 24 AWG.

2. The power input range is DC 12V ~ 48V and

supports AC 24V.

3. Use one power input when using AC 24V.

2.6 GroundingtheDevice

Users MUST complete grounding wired with the device;

otherwise, a sudden lightning could cause fatal damage to the

device.

Fault

V1+ V2+

PWR2PWR1

Max. fault loading: 24V, 1A

DC Inp ut: 12- 48V , 1.5A ma x.

Input: 24V , 1A max .

1 2 3 4 5 6

Earth Ground

Note

EMD (Lightning) DAMAGE IS NOT CONVERED UNDER

WARRANTY.

Produkt Specifikationer

Mærke:	Planet
Kategori:	Ikke kategoriseret
Model:	IGS-1600T
Kode for international beskyttelse (IP):	IP30
Bredde:	66 mm
Dybde:	107 mm
Højde:	152 mm
Vægt:	743 g
Produktfarve:	Blå
Opbevaringstemperatur (T-T):	-40 - 85 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Driftstemperatur (T-T):	-40 - 75 °C
Husmateriale:	Metal
Certificering:	FCC 15 A, CE\nIEC60068-2-32, IEC60068-2-27, IEC60068-2-6
Strømforbrug (maks.):	8.7 W
Netværksstandarder:	IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Kan monteres på væggen:	Ja
Harmoniseret systemkode (HS):	85176990
DC indgangsspænding:	12 - 48 V
Fuld duplex:	Ja
Strøm over Ethernet (PoE):	Ingen
Switch-type:	Ikke administreret
Switch lag:	L2
10G understøttelse:	Ingen
Auto MDI/MDI-X:	Ja
Flowkontrol support:	Ja
Kobber ethernet kabelteknologi:	10BASE-T, 100BASE-TX, 1000BASE-T
Basis omskiftning RJ-45 Ethernet porte, antal:	16
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
Opbevar-og-frem:	Ja
MAC adresselabel:	8000 entries
Switch kapacitet:	32 Gbit/sek.
Gennnemløb:	23.81 Mpps
Jumbo Frames support:	Ja
Jumbo rammer:	10000
MAC-adresse auto-indlæring understøttet:	Ja
MAC-adresse auto-forældelse understøttet:	Ja
DIN-skinne montering:	Ja
Auto-forhandling:	Ja
Pakke bufferlager:	4.1 MB