Planet POE-175-95 Manual

Planet Ikke kategoriseret POE-175-95

Læs gratis den danske manual til Planet POE-175-95 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Planet POE-175-95, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET POE-175-95 Single-port

10/100/1000Mbps 802.3bt PoE++ Injector.

Please unpack the box of the device carefully, and the box should

contain the following items:

802.3bt PoE injector x 1 User’s manual x 1

AC power cord x 1 Ground cable x 1

If any item is found missing or damaged, please contact your local

reseller for replacement.

3.ProductSpecications

Product POE-175-95

Hardware Specications

Interface

Input Port 1 x RJ45 STP Data In

Output Port 1 x RJ45 STP PoE (Data + Power) Out

AC Socket 1 x AC input socket

DIP Switch BT, UPoE or Legacy BT Mode

Network Cable

Twisted-pair cable up to 100 meters

(328ft)

10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6

100BASE-TX: 4-pair UTP Cat. 5, 5e, 6

1000BASE-T: 4-pair UTP Cat. 5e, 6

LED Indicators

PWR x 1 (Green)

PoE-in-Use x 1 (Green)

PoE Max x 1 (Green)

Data Rate 10/100/1000Mbps

Dimensions (W

H) 170 x 100 x 40 mm

Weight 443g

Unit Output Voltage DC 54V

Power Requirements AC 100-240V, 1.8A max.

Power Consumption

Max. 1 watts/3.41 BTU (No Loading)

Max.111 watts/378.5 BTU (Full loading)

No. of Devices that

Can be Powered

LED Indicators:

10/100/1000T

EthernetEthernet+DC

PWR

PoE-in-Use

PoE Max.

POE-175-95

802.3bt PoE++ Injector

BTLegacy BT UPoE

LED Color Function

PWR Green Lights to indicate the device has power.

PoE-in-Use Green

Lights There is a PoE PD connected to the

port, which supplies power.

Blinks Indicates the port’s power supply is

abnormal.

O No PoE powered device (PD) connected.

Max. PoE

Usage

Green

Lights Indicating the output power reaches

80%

Operating Humidity

5 ~ 90%, relative humidity,

non-condensing

Storage Humidity

5 ~ 90%, relative humidity,

non-condensing

Caution

1. As IEEE 802.3bt device provides high power, please

use high-quality network cable and RJ45 connector.

2. The maximum PoE output power depends on the

cable length and the quality of cable.

2. Product Features

 Interface

 2 RJ45 interfaces

 1-port Data input

 1-port Data + Power output

 1 AC 100-240V input power socket

 1 DIP switch for selecting BT, UPoE or Legacy mode

 Power over Ethernet

 Complies with IEEE 802.3af/at/bt PoE end-span/mid-span PSE

 Supports PoE power up to 95 watts for PoE port

 Auto-detection of PoE IEEE 802.3af/at/bt devices that may be

damaged by incorrect installation

 Monitor the status of the total PoE usage in real time

 Remote power feeding up to 100m

 Hardware

 All-in-one compact size design

 Internal power supply

 LED indicators for power, PoE-in-Use and maximum PoE usage

Power over Ethernet

PoE DIP Switch

IEEE 802.3af/at/bt PSE

UPoE

Legacy BT

PoE Power Output

Budget

DC 54V / 95-watt PoE via 4-pair

PoE Power Output

Max. 95W@1 m cable

Max. 73W@100 m cable

PoE Power Supply Type End-span + Mid-span

Power Pin Assignment

Pair 1 End-span: 1/2 (-), 3/6 (+)

Pair 2 Mid-span: 4/5 (+), 7/8 (-)

Standards Conformance

Standards Compliance

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit

Ethernet

IEEE 802.3bt 4-pair Power over Ethernet

Type 4

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3af Power over Ethernet

Regulatory Compliance FCC Part 15 Class A, CE

Surge Protection

Dierence Mode: ±2KV,

Common mode: ±4KV

Electrostatic standard Contact 6KV, air 8KV

Environment

Operating Temperature 0 ~ 50 degrees C

Storage Temperature -40 ~ 70 degrees C

4. Product Outlook

100-240V AC, 50/60Hz

10/100/1000T

EthernetEthernet+DC

PWR

PoE-in-Use

PoE Max.

POE-175-95

802.3bt PoE++ Injector

BTLegacy BT UPoE

Figure 1: Dimensions

5. Hardware Installation

The following section describes the hardware features of the

POE-175-95. Before connecting any network device to it, please

read this chapter carefully.

5.1 PoE Injector Grounding

A good grounding system is the groundwork for the smooth and

safe operation of the POE-175-95, and an excellent way to prevent

lightning strikes and resistance to interference. Please follow the

POE-175-95’s grounding specication instructions to ensure a good

grounding system.

 Proper Grounding

When using an AC power source, the device must be grounded

with the green and yellow ground cables; otherwise, shock hazards

may occur when insulation resistance between the internal power

supply and the PoE Injector degrades.

 Lightning and Grounding Protection

The lightning protection system is an independent system

consisting of a lightning rod, conductor and connection joint with

the grounding system. The grounding system usually is shared

with the ground reference, and green and yellow ground cables.

Lightning and grounding protection is a building requirement, not a

specic requirement of the PoE Injector.

The POE-175-95 provides chassis grounding post on its rear side.

Chassis grounding protection should be properly connected to the

grounding connector.

Produkt Specifikationer

Mærke:	Planet
Kategori:	Ikke kategoriseret
Model:	POE-175-95
Bredde:	170 mm
Dybde:	100 mm
Højde:	40 mm
Vægt:	480 g
Produktfarve:	Sort
Opbevaringstemperatur (T-T):	-10 - 70 °C
Relativ luftfugtighed ved drift (H-H):	5 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 90 %
Ethernet LAN-porte (RJ-45):	1
Driftstemperatur (T-T):	0 - 50 °C
Udgangseffekt:	95 W
Kabelteknologi:	10/100/1000Base-T(X)
Netværksstandarder:	IEEE 802.3bt
LED-indikatorer:	Ja
Udgangsspænding:	DC 54 V
Indgangsspænding:	100 - 240 V
Strøm-LED:	Ja
Strøm over Ethernet (PoE):	Ja
RJ-45 indgangs-porte:	1
RJ-45 udgangs-porte:	1
Standard for kabler:	Cat6