Planet POE-TESTER+ Manual

Planet Ikke kategoriseret POE-TESTER+

Læs gratis den danske manual til Planet POE-TESTER+ (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Planet POE-TESTER+, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

POE-TESTER+

IEEE 802.3af/at/bt Power over Ethernet Tester

Quick and Easy Test on RJ45 Outlet for Power over Ethernet Existence in

a Second

PLANET POE-TESTER+ is a new generation easy-to-use PoE diagnostic adapter for

network installers, system integrator, company MIS and even home users to quickly

identify the existence of Power over Ethernet on applications network. It is designed to

detect if the IEEE 802.3af/at/bt PoE voltage runs over the UTP cable and identify the

type of PSE (Power Source Equipment) for troubleshooting.

• Quickly tests RJ45 outlet for Power over Ethernet existence

• Two bi-color LEDs indicate the PoE standards and types of

PSE (power source equipment)

– 802.3af PoE

– 802.3at PoE+

– End-span PoE switch

– Mid-span PoE injector / injector hub

– 4-pair, end-span + mid-span 802.3bt PoE++ switch / injector

• Compliant with IEEE 802.3bt/at/af PoE standard

• Compact size, Plug and Play design

802.3af End-s pan

802.3af Mid-span

802.3at End-s pan

802.3at Mid-span

802.3af 4-pair

802.3bt/4- pair at

802.3af End-span

802.3af Mid-span

802.3at End-span

802.3at Mid-span

802.3af 4-pair

802.3bt/4-pair at

6 Modes

Plug and Show LED Indicators

Simply connect the POE-TESTER+ to the PSE or the RJ45 outlet and the LED will

lightupwhenitdetectsthePoEvoltageviatheUTPcableandidentiesthePSEtobe

mid-span, end-span, 802.3af PoE mode, 802.3at PoE+ mode or even the latest 4-pair

802.3bt PoE++ mode in a second.

POE-TESTER+

Identify PoE PSE Modes and Standards

The POE-TESTER+ provides two bi-color LEDs for quick and easy PSE mode identification. A Power over Ethernet system comprises a PSE (Power Sourcing

Equipment) and a ). The PSE is a device that will provide power in a PoE setup. There are three types of PSE, PD (Powered Device Mode A, Mode B and 4-pair

mode. The PSE may be a Mode A, end-span PoE switch or a Mode B, mid-span PoE injector or a 4-pair mode PSE that is end-span plus mid-span.

The PD is a PoE-enabled terminal by PSE and thus consumes energy, such as IP network cameras, VoIP phones and wireless access points and more.

PoE Installation Troubleshooting

Although PDs that implement only Mode A with end-span or Mode B with mid-span are disallowed by the IEEE 802.3af/at standard, there are still some of the

PDs that are designed to work with only one of the modes. Thus, it will cause the PoE PSE and PD not to be compatible with each other in the applications.

For example, an end-span designed PoE switch cannot power on the remote mid-span only wireless access point. But most of the time, the installers would not

exactlyknowwhattheremotePSEdevicesare.PLANETPOE-TESTER+checksyourUTPcableforpowerandidentiesitssource,mid-span,end-spanormid-

span + end-span. Make sure at the end of UTP cable there is existence of PoE, and then the next step is to check if the PD is compatible with the PSE, or it is a

malfunctioned PD.

PoE PSE Modes UTP Power

Pin Assignment PSE Devices

Mode A / End-span Pins 1,2,3 and 6

PoE Switch

PoE Media Converter

PoE Extender

Mode B / Mid-span Pins 4,5,7 and 8 PoE Single-port Injector

PoE Multi-port Injector Hub

4-pair PSE All pins

802.3bt/PoH PoE Switch

802.3bt/PoH Media Converter

802.3bt/PoH PoE Extender

802.3bt/PoH PoE Injector

802.3bt/PoH PoE Injector Hub

Applications

Withcompactsizeandcongurefreedesign,thePOE-TESTER+istrulythebesthandyPoEtesttoolfortheinstallationofPDdeviceto testifIEEE802.3af/at/

bt PoE power is sent to wireless access points, IP surveillance cameras, VoIP phones and other PoE devices. It offers plug-and-play PoE diagnostic and PoE