Powerplus POWX0760 Manual

Powerplus Sav POWX0760

Læs gratis den danske manual til Powerplus POWX0760 (23 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Powerplus POWX0760, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/23

POWX0760 EN

1 APPLICATION .................................................................................. 4

2 DESCRIPTION ................................................................................. 4

3 PACKAGE CONTENT LIST ............................................................. 5

4 SYMBOLS ........................................................................................ 5

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 6

5.1 Work area ................................................................................................................ 6

5.2 Electrical safety ....................................................................................................... 6

5.3 Personal safety 6 .......................................................................................................

5.4 Power tool use and care ......................................................................................... 7

5.5 Service ..................................................................................................................... 7

6 ADDITIONAL SAFETY INSTRUCTIONS FOR TABLE SAWS ....... 7

6.1 For both Mitre saw mode and table saw (bench saw) mode: ............................... 7

6.2 When using in Mitre saw mode: ............................................................................. 8

6.3 When using in the table saw (bench saw) mode: .................................................. 8

7 INSTALLATION ................................................................................ 9

7.1 Bench mounting (Fig. 1 & 3) ................................................................................... 9

7.1.1 For the fully-extended feet set up as the high table. .................................................. 9

7.1.2 For the folded feet set up as the low table ................................................................. 9

8 FUNCTIONAL DESCRIPTI ON ......................................................... 9

8.1 Blade guard (Fig. 4, 5 & 6) ...................................................................................... 9

8.2 Maintaining maximum cutting capacity (Fig. 7) .................................................. 10

8 Adjusting the Mitre angle (Fig. 9 & 10) .3 ................................................................. 11

8.4 Adjusting the bevel angle (Fig. 11 & 12) .............................................................. 11

8.4.1 In the Mitre saw mode ............................................................................................. 11

8.4.2 In the table saw mode (Fig. 13) ............................................................................... 11

8.5 Switch action (Fig. 14) .......................................................................................... 11

8.5.1 Switch for the table saw mode (B) ........................................................................... 11

8.6 Adjusting the depth of cut (Fig. 15 - 21) ..............................................................11

9 ASSEMBLY .................................................................................... 11

9.1 Socket wrench storage (Fig. 17) ...........................................................................11

9.2 Table height two-way set up ................................................................................. 12

POWX0760 EN

9.2.1 High table set up (Fig. 18) ....................................................................................... 12

9.2.2 Low table set up (Fig. 19) ........................................................................................ 12

9.3 Installing or removing saw blade ......................................................................... 12

9.4 Adjusting riving knife (ﬁg 25,26 & 27) .................................................................. 12

9.5 Installing and adjusting rip fence (Fig. 28) .......................................................... 13

9.6 Installing and adjusting Mitre gauge (Fig. 35) ..................................................... 14

9.7 Dust bag (Fig 36, 37 & 38) ..................................................................................... 14

9.8 Securing workpiece .............................................................................................. 14

9.9 Setting up the tool in table saw mode ................................................................. 14

9.9.1 Securing the turn table (Fig. 41) .............................................................................. 15

9.9.2 Securing the tool head (Fig. 42) .............................................................................. 15

9.9.3 Releasing the lower limit stopper (Fig. 43) ............................................................... 15

9.9.4 Repositioning the riving knife (Fig. 44) ....................................................................15

9.9.5 Removing the lower blade guard (Fig. 45) ............................................................... 15

9.9.6 Locking the tool head at fully lowered position (Fig. 46) ...........................................15

9.9.7 Turning over the tool (Fig. 48) ................................................................................. 15

9.9.8 Installing the top blade guard (Fig. 49) .................................................................... 15

9.10 Setting up the tool in Mitre saw mode (Fig. 50) ................................................... 16

9.10.1 Removing the top blade guard ............................................................................16

9.10.2 Installing the lower blade guard C ...................................................................... 16

9.10.3 Turning over the tool .......................................................................................... 16

9.10.4 Releasing the tool head from fully lowered position ............................................ 16

9.10.5 Repositioning riving knife (Fig. 51) .....................................................................16

9.10.6 Installing or removing the sub fences R and L (Fig. 52) ...................................... 16

10 OPERATION ................................................................................... 17

10.1 Cutting as mitre saw ............................................................................................. 17

10.1.1 Press cutting ...................................................................................................... 17

10.1.2 Mitre cutting ....................................................................................................... 17

10.1.3 Bevel cut ............................................................................................................ 17

10.1.4 Compound cutting .............................................................................................. 18

10.1.5 Cutting aluminum extrusion (Fig. 56) .................................................................. 18

10.2 Cutting as table saw (bench mode) .....................................................................18

Produkt Specifikationer

Mærke:	Powerplus
Kategori:	Sav
Model:	POWX0760
Indgangseffekt:	1800 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	4200 rpm
Lydeffektniveau:	105 dB
Blad, diameter:	255 mm