
THANK YOU FOR BUYING OUR PRODUCT.
Before using the appliance carefully read the Safety Instruction.
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch o the acoustic alarms.
3. Freezer and refrigerator compartment
Press the button for 3 seconds to turn the appliance o. In
Stand-by mode the light in the refrigerator compartment does not turn
on. Press the button again briey to reactivate the appliance.
Note: this does not disconnect the appliance from the power supply.
The three LED indicators indicate the refrigerator compartment set
It is possible to set a dierent temperature of the appliance with the
The following adjustments are possible:
You can turn the Fan on/o by pressing the button on the base (as
shown in the gure). If the ambient temperature exceeds
27°C, or if drops of water are present on the glass shelves,
it is essential that the fan is on to ensure the proper
preservation of the food. Deactivation of the fan allows
energy consumption to be optimised.
Place the fresh food to be frozen in the FREEZING ZONE in the freezer
compartment avoiding the direct contact with the food that is already
frozen. To optimize the freezing speed, the lower drawer can be
removed and the food can be placed directly on the bottom of the
* Available only on certain models