QFX PBX-8008SM Manual

QFX Højttaler PBX-8008SM

Læs nedenfor 📖 manual på dansk for QFX PBX-8008SM (5 sider) i kategorien Højttaler. Denne guide var nyttig for 8 personer og blev bedømt med 4.6 stjerner i gennemsnit af 4.5 brugere

Side 1/5
TWS (TRUE WIRELESS STEREO) PARING 2 PBX- 8008SM
Step 1:
Push the Mode button on both speaker until both speaker are in Bluetooth Mode.
Display will show Bluetooth.
Step 2: When both speakers are in Bluetooth Mode. Push and hold the TWS button
one of the speakers for3 seconds. You will hear a beep. The speakers will connect
will connect automatically
Step 3: On your Bluetooth settings on your device, find QFX PBX- 080 8SM”. If your
TWS speaker paring was successful you should only see one “QFX PBX-8008SM”
to choose from.
Select the “QFX PBX- 8008SM”.
Enjoy True Wireless Stereo (TWS) sound from your phone via Bluetooth
!
!
!
3
PORTABLE BATTERY SPEAKER
User Manual
PBX 8008SM-
Control Panel Function
1.Power/VOLUME - &+
2.Charging Indicator
RED=Charging
Light off= Fully Charged
3.DC interface (5V)
4 .Next track
5.Play/Pause&TWS (Wirless Bluetooth Connection: under bluetooth mode,
press TWS button for around 3 seconds to pair another TWS speaker;
Under FM mode, press Play/Pause&TWS to enter into automatic scan
and all the scanned radio stations will be saved automatically.)
6 .Previous track
7.MODE/LED ON(Long press to turn on/off light; Lightly press to enter into
selection for Bluetooth,FM Radio,AUX Input,USB)
8 .USB input
9 .AUX input
10.MIC input
SPECIFICATIONS
Frequency Response
for main speaker: 68Hz- 20KHz
Power Supply: DC5V
Maximum battery life based on minimum power and volume settings
1
POWER SOURCE
1.Please charge the unit at least 4 hours before first time using.
2. Twist the dial clockwise/anticlockwise to switch on/off the unit.
C HARGE THE BATTERY
When the battery is charging, the CHARGE STATUS lights shows on the LED
display is red. After the battery has fully charged, the light turns off.
1. Connect the USB charge cable to the DC5V interface of the speaker firmly.
2. When the battery is fully charged, please disconnect the USB charge cable from
the speaker.
3.The speaker works normally when charging.
POWER/VOLUME
Twist the dial clockwise/anticlockwise to increase/discrease the mus volume.
PREVIOUS/NEXT BUTTON
Under playing status, press PREVIOUS/NEXT button to get back to a previous or
next song.
PAUSE/PLAY BUTTON
To stop playing the current track, please press PAUSE/PLAY button on the control
panel. Press it once again to continue playing.
MODE/LED ON
Long press to turn on/off light.
Lightly press to enter into playing mode selection(Bluetooth,FM Radio,AUX Input,
USB).
AUX IN JACK
1.Connect an audio cable to the AUX IN JACK of the speaker and to the audio
output socket on the external audio devices such as MP3 player, disc n man,etc,the
select LINE by pressing the MODE/LED ON button on the control panel .
2.Play from an external audio device.
MIC IN JACK
Plug in microphone directly for playing.
USB JACK
Insert USB card directly for playing.
FM FUNCTION
Lightly press MODE/LE buttonD ON to switch to FM mode. Press PLAY/PAUSE
button on control panel for automatic searching and saving the radio stations,
by pressing PREVIOUS or NEXT you can select a previous or next radio station.
Bluetooth:
Press MODE/LED ON button on control panel to select Bluetooth mode.
Simultaneously open the Bluetooth setting on your phone, tablet or any other
bluetooth enabled audio device and select "QFX PBX-8008SM"(no need to match
code),the unit and device will then connected via Bluetooth. Press the "NEXT
SONG" and "PREVIOUS SONG" button on the control panel to select the song,
press " PLAY/PAUSE" button to control the playing status.


Produkt Specifikationer

Mærke: QFX
Kategori: Højttaler
Model: PBX-8008SM

Har du brug for hjælp?

Hvis du har brug for hjælp til QFX PBX-8008SM stil et spørgsmål nedenfor, og andre brugere vil svare dig