Raymarine Ray 230E Manual

Raymarine Ikke kategoriseret Ray 230E

Læs gratis den danske manual til Raymarine Ray 230E (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Raymarine Ray 230E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

POWER

TRI

MEM

D/L

HAIL

VOL SQ

SCROLL

SCAN

1/25

FOGIC

LOG DIM

WXPRIV

M-CALL

CELL

Switches between the Working Channel

and the Priority Channel. When the

transceiver’s main power switch is

turned on, 16/POWER also powers the

system ON or OFF.

Initiates the Dual-Watch monitor mode.

Pressing FUNC + MON/TRI starts the Tri-

Watch monitor mode.

Alternately inputs a 1 or a space

character. Pressing FUNC + 1/MEM

enters the channel number indicated on

the LCD into memory or, if the currently

indicated channel has already been

stored, deletes that channel from

memory.

Alternately inputs the characters 4, G, H,

and I. Pressing FUNC + 4/US switches

between the International and US

frequency groups.

Alternately inputs the characters 7, P, Q,

R, and S. Pressing FUNC + 7/D/L switches

receiver sensitivity between Distant (full)

and Local (attenuated) modes.

Inputs an asterisk (*) character. Pressing

FUNC + */HAIL toggles ON and OFF the

Hailer mode, which enables a Hailer

Horn speaker to be used as a loud

speaker or a directional microphone.

Performs the Enter function. Used to

conﬁrm and implement an input action.

Pressing FUNC + ENT/MENU initiates

Menu mode.

Changes the volume of the handset.

Alternately inputs the characters 2, A, B,

and C. Pressing FUNC + 2/SCAN toggles

ON and OFF the Scan mode.

Alternately inputs the characters 5, J, K,

and L. Pressing FUNC + 5/PRIV initiates

Private Channel mode. To select the

desired Private Channel, input the

number keys corresponding to the

desired channel number and press the

ENT key.

Alternately inputs the characters 8, T, U,

and V. Pressing FUNC + 8/M-CALL

toggles ON and OFF the Multi-Call mode.

Inputs the number 0. Pressing FUNC +

0/IC toggles ON and OFF the Intercom

mode, which enables conversation

between handsets.

Exits the current mode and reverts to the

last used mode or normal operation. Also

used to clear any alphanumeric inputs,

one at a time, in the order that they were

entered. Pressing FUNC + CLR/LOG turns

ON and OFF the Digital Selective Calling

(DSC) Log.

Increases or decreases the squelch

sensitivity. Also used as a scroll key for

selecting menu items and other settings.

Alternately inputs the characters 3, D, E,

and F. If equipped with the DTMF option,

pressing FUNC + 3/CELL connects the

handset with any auxiliary

communication equipment with DTMF

interface that is connected to the AUX

port on the base station transceiver.

Alternately inputs the characters 6, M, N,

and O. Pressing FUNC + 6/WX switches

between the Working and Weather

Channels, if in US frequency mode.

Alternately inputs the characters 9, W, X,

Y, and Z. Pressing FUNC + 9/1/25

switches the transmission power

between 1W and 25W.

Inputs the # character. Pressing FUNC +

#/FOG toggles ON and OFF Fog Alert

mode, which enables a Hailer Horn

speaker to sound several types of

automatic or manual alert tones.

Initiates the Function mode and activates

the FUNC indicator in the LCD display.

The next key pressed determines the

function selected. Pressing this key twice

starts Dimmer mode, which adjusts the

brightness of LCD's backlight.

TRI

MEM

D/L

HAIL

VOL

SCAN

PRIV

M-CALL

LOG

SCROLL

CELL

1/25

FOG

DIM

POWER

Switches to DSC Individual Ships Call

mode for initiating ship-to-ship or ship-

to-shore calls using a speciﬁc MMSI

number.

Switches to the All Ships Call mode for

Safety and Urgency transmissions.

RAY230E VHF Radio

D5767-1

86070_2

Three-digit, Seven-segment Display shows

the channel number or state of the radio.

Nine-digit Dot-matrix Display shows alphanumeric

messages, modes, and functional status of the radio.

NMEA Receiving valid SeaTalk or NMEA position data.

FUNC FUNC key has been pressed.

WX Radio in Weather Channel mode.

TX Radio in Transmit mode.

US US Frequency Group selected.

INT International Frequency Group selected.

1W 1 Watt Power Transmission mode.

Volume Level

Squelch Level

Indicators Illuminate during the following conditions:

DESENS Desensitized (local) Receiving mode.

MEM Active channel is stored in memory.

MULTI Active channel stored in Multi-Call memory.

SCAN Radio in Scan mode.

DSC DSC call mode; DSC log or DSC menu active.

ATIS Automatic Identiﬁcation Transmission active.

RAY230E DISPLAY

Indicators

DSC ALL SHIPS CALL

Press the ALL SHIP key. Press the SQ UP/DOWN keys to toggle between SAFETY and URGENCY.

Press the ENT key to submit your selection. The prompt RECONFIRM is displayed. Press the ENT key to conﬁrm.

Press and release PTT to transmit the SAFETY/URGENCY call. The radio switches to Channel 16.

Makes a DSC call to All Ships in the area when assistance is needed but the ship is not in distress. Select between

a SAFETY call for advisory alerts or an URGENCY call for assistance when life is not in immediate danger.

SCROLL

Press PTT to converse with receiving stations on Channel 16.

PTT

D5768-2

DSC DISTRESS CALL

Press PTT to speak with the acknowledging station on channel 16.

When a response is received, the LCD scrolls a message that the DISTRESS has been acknowledged, along

with the sending station's MMSI number or nickname. The message and alert are repeated until the CLR

key is pressed.

1. Press the DISTRESS button. ﬂashes and illuminates on display.and hold dSr DSC

Lift the door labeled DISTRESS on the back of the handset.

Specifying the Type of Distress (OPTIONAL)

1. Press the DISTRESS button. ﬂashes and illuminates on display.and release dSr DSC

2. Use the SQ UP and SQ DOWN keys to select the type of distress.

3. Press the DISTRESS button to send.and hold

Without Specifying the Type of Distress (QUICK)

Continue to hold the DISTRESS button for a 4 second countdown. Release the DISTRESS button after the

countdown has completed and the message RELEASE appears on the dot matrix display. The unit sounds

a loud alert tone, switches to channel 16 and monitors for acknowledgement.

SQ UP/

DOWN

PRESS &

RELEASE

LIFT

DOOR

—

PRESS

& HOLD

LIFT

DOOR

—

Press and release CLR to mute the alert tone. This does not interrupt the Distress Call.

RELEASE

DISTRESS

HOLD

DISTRESS

—

Produkt Specifikationer

Mærke:	Raymarine
Kategori:	Ikke kategoriseret
Model:	Ray 230E

Har du brug for hjælp?

Hvis du har brug for hjælp til Raymarine Ray 230E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Raymarine Manualer

Raymarine T400 series Manual

16 August 2024

Raymarine T353 Manual

16 August 2024

Raymarine Evolution EV-1 Manual

15 August 2024

Raymarine Quantum Manual

15 August 2024

Raymarine 45STV Manual

14 August 2024

Raymarine Ray240 Manual

14 August 2024

Raymarine e7 Manual

14 August 2024

Raymarine Ray101E Manual

13 August 2024

Raymarine CPT-110 Manual

13 August 2024

Raymarine Ray55E Manual

13 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman MiVue 540 Manual

2 August 2025

Pro User PSI2000TX Manual

2 August 2025

Guede 5T Manual

2 August 2025

Navman EZY40 Manual

2 August 2025

Thule Chariot Ski kit Manual

2 August 2025

Hozelock 5102 Manual

2 August 2025

ART 310 Manual

2 August 2025

Gorenje KAS53ZDCINVFT Manual

2 August 2025

Gorenje KAS35ZDCINVFT Manual

2 August 2025

Navman MY450LMT Manual

2 August 2025