RCF TT 45-SMA Manual

RCF Skærm TT 45-SMA

Læs gratis den danske manual til RCF TT 45-SMA (12 sider) i kategorien Skærm. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 5 anmeldelser. Har du et spørgsmål om RCF TT 45-SMA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

TT45-SMA

HIGH OUTPUT STAGE MONITOR

“HIGH OUTPUT AT PREMIUM SOUND QUALITY”

We started the design of our TT+ compact speakers with a clear idea in mind:

maximum high quality audio SPL in the smallest weight and size. Thanks to our state

of the art neodymium transducers, premium quality analog processing and powerful

class D amplifiers we reached and surpassed our original goals

IMPORTANT NOTES

Before connecting and using the amplifier, please read this instruction manual carefully and keep it on hand for future reference. The

manual is to be considered an integral part of the product and must accompany the amplifier when it changes ownership as a

reference for correct installation and use as well as for the safety precautions. RCF Spa. will not assume any responsibility for the

incorrect installation and/or use of the product.IANO

WARNING: To prevent the risk of fire or electric shock, never expose this equipment to rain or humidity.

SAFETY PRECAUTIONS

1. All the precautions, in particular the safety ones, must be read with special attention, as they provide important information.

2. The power supply voltage of this equipment is sufficiently high to involve a risk of electrocution; therefore, never install or connect

the product with the power supply switched on.

3. Before powering up the amplifier, make sure that all the connections have been made correctly and that the voltage of your power

mains corresponds to the voltage shown on the rating plate on the unit; if it does not, please contact your RCF dealer.

4. The metallic parts of the unit are earthed by means of the power cable. In the event that the current outlet used for power does not

provide the earth connection, contact a qualified electrician to earth the equipment using the dedicated terminal.

5. To protect the power cable from damage, make sure that it is positioned so that it cannot be stepped on or crushed by objects.

6. To prevent the risk of electric shock, never open the amplifier. There are no parts on the inside that the user needs to access.

7. Make sure that no objects or liquids can get into the amplifier, as this may cause a short circuit.

8. Never attempt to carry out any operations, modifications, or repairs that are not expressly described in this manual.

Contact your authorized service centre or qualified personnel should any of the following occur:

- the amplifier does not function (or functions in an anomalous way);

- the power supply cable has been damaged;

- objects or liquids have got into the unit;

- the amplifier has been subject to heavy impact.

9. When the amplifier is not to be used for long periods of time, switch it off and disconnect the power cable.

10. If the amplifier begins to emit any strange odours or smoke, switch it off immediately and disconnect the power supply cable.

11. Do not connect this product to any equipment or accessories not specified.

For suspended installation, only use the dedicated anchoring points and do not try to hang this product using HANDLES or elements

that are unsuitable or not specific for this purpose.

Also check the suitability of the support surface to which the product is anchored (wall, ceiling, structure, etc.), and the components

used for attachment (screw anchors, screws, brackets not supplied by RCF etc.), which must guarantee the security of the

system/installation over time, also considering, for example, the mechanical vibrations normally generated by the transducer.

To prevent the risk of falling equipment, do not stack multiple units of this product unless this possibility is specified in the instruction

manual.

12. RCF Spa. strongly recommends this product is installed by professional qualified installers (or specialised firms) who can ensure

correct installation and certify it according to the regulations in force.

The entire audio system must comply with the current standards and regulations regarding electrical systems.

13. Supports and trolleys

The equipment should only be used on trolleys or supports, where necessary, that are recommended by the manufacturer. The

equipment/support/trolley assembly must be moved with extreme caution. Sudden stops, excessive pushing force and uneven floors

may cause the assembly to overturn.

14. There are numerous mechanical and electrical factors to be considered when installing a professional audio system (in addition to

those which are strictly acoustic, such as sound pressure, angles of coverage, frequency response, etc.).

15. Hearing loss

Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure level that leads to hearing loss is different

from person to person and depends on the duration of exposure. To prevent potentially dangerous exposure to high levels of acoustic

pressure, anyone who is exposed to these levels should use adequate protection devices. When a transducer capable of producing

high sound levels is being used, it is therefore necessary to wear ear plugs or protective earphones.

See the technical specifications in the instruction manual for the maximum sound pressure the loudspeaker is capable of producing

IMPORTANT NOTES

To prevent the occurrence of noise on the cables that carry microphone signals or line signals (for example, 0 dB), only use screened

cables and avoid running them in the vicinity of:

- equipment that produces high-intensity electromagnetic fields (for example, high power transformers);

- mains cables;

- lines that supply loudspeakers.

Produkt Specifikationer

Mærke:	RCF
Kategori:	Skærm
Model:	TT 45-SMA
Bredde:	337 mm
Dybde:	315 mm
Højde:	537 mm
Vægt:	12400 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Pakkevægt:	15600 g
Pakkedybde:	372 mm
Pakkebredde:	396 mm
Pakkehøjde:	600 mm
Bluetooth:	Ingen
Udgangseffekt (RMS):	400 W
Pakketype:	Kasse
Lydtryksniveau (maks.):	127 dB
Forbindelsesteknologi:	Ledningsført
Højttaler, type:	2-vejs
Lyd-output kanaler:	2.0 kanaler
Højttaler, placering:	Gulv
Strømkilde type:	Vekselstrøm
Peak Music-Udgangseffekt (PMPO):	800 W
Delefrekvens:	1800 Hz
Bashøjttaler:	Ja
XLR indgang:	Ja
(1/4 inch) indgang 6,35 mm:	1