Ridgid 202 Manual

Ridgid Ikke kategoriseret 202

Læs gratis den danske manual til Ridgid 202 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 100 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 50.5 anmeldelser. Har du et spørgsmål om Ridgid 202, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Proper Use of Pipe Cutters

Pipe cutters are available in a number of different

sizes. Use depends on what size, type of material,

and the situation under which they are to be used.

It has always been acknowledged that the best way to

cut pipe is by using a pipe cutter. This method assures

that the pipe is cut squarely, accurately, and quickly.

The simplest form of pipe cutter is fitted with one cut-

ter wheel and two rollers which keep the cutter square

to the pipe and which are rolled around the circumfer-

ence of the pipe. Sufficient force creates a groove

which is gradually worked deeper until it cuts through

the pipe wall. No metal is removed; it is only displaced

and pushed away by the cutter.

Single wheel cutters must be rotated through 360° to complete the cut. Should there not be enough space

to do this, a four wheel cutter should be used. By swinging the cutter through an arc of 120° each

wheel will track to the groove cut by another wheel and thus completes the cut.

Pipe can, of course, be cut by the use of a hack saws, torches, and other means.

However, if the pipe is to be threaded, the end must be squared off. This can rarely

be achieved without a tool specifically designed for pipe cutting and may result in

badly cut threads and possibly broken dies.

Select The Correct Cutter

In order to get maximum performance from a tool, one should

always ensure that the correct model of pipe cutter has been

selected for the job. Definite forms of pipe cutters are available

for specific functions from, the simple single wheel tool to the

more sophisticated four wheel unit, and those which are specifi-

cally designed for use with power drives and threading

machines. Each of these tools has its own particular features

suited for its intended job. On occasion for lack of the correct tool,

some people try to cut pipe with a tubing cutter. A tubing cutter

should never be used for such work. Its design and construction

make it suitable for cutting through the thin walls of tubing and

thin walled conduit only.

Never try to cut pipe with the wrong cutter type

or cutter wheel. This may result in serious injury and damage

to the tool and work piece.

Check The Cutter Wheel

Always ensure that when selecting the cutter, the cutter wheel is

of the type suited to 1) the cutter being used and 2) the material

to be cut. Always inspect the cutter wheel before use to see that

it is not blunt or damaged in any way.

7/2005

Cutter Wheel

(See Wheel Types)

Frame

Roll

Feed Screw

Wear Plug

Roll Pin

Wheel Pin

Roll Housing

WARNING

No. 42-A

Mounting The Cutter On The Pipe

Open the cutter by turning the feed handle counter clockwise and

place the cutter on the solidly held pipe so that the rollers are in

contact with the pipe. Turn the screw handle clockwise until the

cutter wheel makes contact with the pipe. The rollers will steady

the cutter and keep it square to the pipe while the cutter wheel

will make contact with the pipe itself.

True Tracking

When the cutter wheel is in contact with the pipe, lightly engage

the cutter wheel by turning the feed screw 1/4of a turn and rotate

the cutter through 360 so that the wheel cuts a light groove.°

Check this groove to see if it into the original starting“tracks”

groove. If it does, the result will be a good cut. If not, it will spiral

and not cut the pipe. If the cutter does not track, the cutter wheel

is probably damaged and should be replaced.

The Cut

Having ensured a true track , tighten the feed screw a quarter of“ ”

a turn and rotate the cutter around the pipe progressively tight-

ening the screw at each turn until the pipe is cut. It should be

noted that the roller, as well as steadying the cutter itself, also

serves to roll down the burrs thrown up on the outside of the pipe

by the cutter wheel.

Do not force the cutter wheel into the pipe. It will

damage and shorten the life of the cutter wheel.

Proper Maintenance of Pipe Cutters

Do not use a pipe cutter that is not properly maintained.

Pipe cutters must be kept clean to ensure they function correctly. always make sure that the feed screw, slide,

cutter wheels, and rollers are kept free of dirt and foreign matter.

• –Clean tools correctly always clean the pipe cutter at the end of each job using a cleaning agent and a

wire brush to clean the feed screw, rollers, and cutter wheel.

• –Oil thoroughly cleaning agents will cause tools to become dry. Always ensure that the feed screw, slide,

rollers and cutter wheels are well lubricated using a suitable lubricating oil. Do not use thread cutting oil which

is not a lubricant.

• –Inspect frequently having cleaned and oiled the cutter thoroughly, inspect it closely to ensure that no dam-

age has taken place to the cutter body, feed screw, rollers; and most important, examine for proper tracking

and cutter wheel sharpness. If any damage is detected, replace the damaged or worn part immediately.

• –Store correctly always hang cutters, if possible, in a warm dry area.

If you have any questions regarding the care and use of tubing cutters, call or email Ridge Tool's Technical

Service Department at (800) 519-3456 or techservices@ridgid.com

CAUTION

WARNING

Produkt Specifikationer

Mærke:	Ridgid
Kategori:	Ikke kategoriseret
Model:	202

Har du brug for hjælp?

Hvis du har brug for hjælp til Ridgid 202 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Ridgid Manualer

Ridgid 300 Compact Manual

12 Januar 2025

Ridgid K-750 Manual

12 Januar 2025

Ridgid HKO-186 Manual

31 August 2024

Ridgid Raprench 10 Manual

31 August 2024

Ridgid KT-190 Manual

31 August 2024

Ridgid 760 FXP Manual

30 August 2024

Ridgid 700 Manual

30 August 2024

Ridgid micro CA-350 Manual

30 August 2024

Ridgid KWIK-SPIN+ Manual

30 August 2024

Ridgid 690-I Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo DFM-32-100-B-PPV-A-KF Manual

17 Juni 2025

Playtive IAN 285777 Manual

17 Juni 2025

Festo VAEM-L1-S-M3-26 Manual

17 Juni 2025

Festo DFPC-320 Manual

17 Juni 2025

EFX ICAK12 Manual

17 Juni 2025

Bearware 307294 Manual

17 Juni 2025

Futaba MC-9200H/A Manual

17 Juni 2025

Hansgrohe AXOR Montreux 16517800 Manual

17 Juni 2025

OmniMount 2N1-S Manual

17 Juni 2025

Festo DSNU-S-12- -F1A Manual

17 Juni 2025