Ridgid 468-HWS Manual

Ridgid Ikke kategoriseret 468-HWS

Læs gratis den danske manual til Ridgid 468-HWS (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Ridgid 468-HWS, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
Proper Use of Pipe Cutters
Pipe cutters are available in a number of different
sizes. Use depends on what size, type of material,
and the situation under which they are to be used.
It has always been acknowledged that the best way to
cut pipe is by using a pipe cutter. This method assures
that the pipe is cut squarely, accurately, and quickly.
The simplest form of pipe cutter is fitted with one cut-
ter wheel and two rollers which keep the cutter square
to the pipe and which are rolled around the circumfer-
ence of the pipe. Sufficient force creates a groove
which is gradually worked deeper until it cuts through
the pipe wall. No metal is removed; it is only displaced
and pushed away by the cutter.
Single wheel cutters must be rotated through 360° to complete the cut. Should there not be enough space
to do this, a four wheel cutter should be used. By swinging the cutter through an arc of 120° each
wheel will track to the groove cut by another wheel and thus completes the cut.
Pipe can, of course, be cut by the use of a hack saws, torches, and other means.
However, if the pipe is to be threaded, the end must be squared off. This can rarely
be achieved without a tool specifically designed for pipe cutting and may result in
badly cut threads and possibly broken dies.
Select The Correct Cutter
In order to get maximum performance from a tool, one should
always ensure that the correct model of pipe cutter has been
selected for the job. Definite forms of pipe cutters are available
for specific functions from, the simple single wheel tool to the
more sophisticated four wheel unit, and those which are specifi-
cally designed for use with power drives and threading
machines. Each of these tools has its own particular features
suited for its intended job. On occasion for lack of the correct tool,
some people try to cut pipe with a tubing cutter. A tubing cutter
should never be used for such work. Its design and construction
make it suitable for cutting through the thin walls of tubing and
thin walled conduit only.
Never try to cut pipe with the wrong cutter type
or cutter wheel. This may result in serious injury and damage
to the tool and work piece.
Check The Cutter Wheel
Always ensure that when selecting the cutter, the cutter wheel is
of the type suited to 1) the cutter being used and 2) the material
to be cut. Always inspect the cutter wheel before use to see that
it is not blunt or damaged in any way.
7/2005
Cutter Wheel
(See Wheel Types)
Frame
Roll
Feed Screw
Wear Plug
Roll Pin
Wheel Pin
Roll Housing
WARNING
No. 42-A
Mounting The Cutter On The Pipe
Open the cutter by turning the feed handle counter clockwise and
place the cutter on the solidly held pipe so that the rollers are in
contact with the pipe. Turn the screw handle clockwise until the
cutter wheel makes contact with the pipe. The rollers will steady
the cutter and keep it square to the pipe while the cutter wheel
will make contact with the pipe itself.
True Tracking
When the cutter wheel is in contact with the pipe, lightly engage
the cutter wheel by turning the feed screw 1/4of a turn and rotate
the cutter through 360 so that the wheel cuts a light groove.°
Check this groove to see if it into the original starting“tracks”
groove. If it does, the result will be a good cut. If not, it will spiral
and not cut the pipe. If the cutter does not track, the cutter wheel
is probably damaged and should be replaced.
The Cut
Having ensured a true track , tighten the feed screw a quarter of“ ”
a turn and rotate the cutter around the pipe progressively tight-
ening the screw at each turn until the pipe is cut. It should be
noted that the roller, as well as steadying the cutter itself, also
serves to roll down the burrs thrown up on the outside of the pipe
by the cutter wheel.
Do not force the cutter wheel into the pipe. It will
damage and shorten the life of the cutter wheel.
Proper Maintenance of Pipe Cutters
Do not use a pipe cutter that is not properly maintained.
Pipe cutters must be kept clean to ensure they function correctly. always make sure that the feed screw, slide,
cutter wheels, and rollers are kept free of dirt and foreign matter.
• –Clean tools correctly always clean the pipe cutter at the end of each job using a cleaning agent and a
wire brush to clean the feed screw, rollers, and cutter wheel.
• –Oil thoroughly cleaning agents will cause tools to become dry. Always ensure that the feed screw, slide,
rollers and cutter wheels are well lubricated using a suitable lubricating oil. Do not use thread cutting oil which
is not a lubricant.
• –Inspect frequently having cleaned and oiled the cutter thoroughly, inspect it closely to ensure that no dam-
age has taken place to the cutter body, feed screw, rollers; and most important, examine for proper tracking
and cutter wheel sharpness. If any damage is detected, replace the damaged or worn part immediately.
• –Store correctly always hang cutters, if possible, in a warm dry area.
If you have any questions regarding the care and use of tubing cutters, call or email Ridge Tool's Technical
Service Department at (800) 519-3456 or techservices@ridgid.com
CAUTION
WARNING

Produkt Specifikationer

Mærke: Ridgid
Kategori: Ikke kategoriseret
Model: 468-HWS

Har du brug for hjælp?

Hvis du har brug for hjælp til Ridgid 468-HWS stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Ridgid Manualer

Ridgid

Ridgid RST100 Manual

19 Juni 2025
Ridgid

Ridgid RST180 Manual

19 Juni 2025
Ridgid

Ridgid 300 Compact Manual

12 Januar 2025
Ridgid

Ridgid K-750 Manual

12 Januar 2025
Ridgid

Ridgid HKO-186 Manual

31 August 2024
Ridgid

Ridgid Raprench 10 Manual

31 August 2024
Ridgid

Ridgid KT-190 Manual

31 August 2024
Ridgid

Ridgid 760 FXP Manual

30 August 2024
Ridgid

Ridgid 700 Manual

30 August 2024
Ridgid

Ridgid micro CA-350 Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rowenta

Rowenta Skin Respect EP8020 Manual

2 Juli 2025
Rowenta

Rowenta Optiliss II SF321L Manual

2 Juli 2025
Rowenta

Rowenta Flower Love EP2851 Manual

2 Juli 2025
Rowenta

Rowenta Silence Infinipro Sensor CV7620 Manual

2 Juli 2025
Rowenta

Rowenta Vacuum Technology TN9210E4 Manual

2 Juli 2025
EKO

EKO K320HGT Manual

2 Juli 2025
Rowenta

Rowenta PROCERAM SO9040 Manual

2 Juli 2025
Rowenta

Rowenta Express Style SF1831 Manual

2 Juli 2025
Rowenta

Rowenta Lissea RF3330 Manual

2 Juli 2025
Rowenta

Rowenta Turbo Silence Extreme VU5540 Manual

2 Juli 2025